Nova Drilling Services Selects Custom Laser Drill from Nano System


Reading time ( words)

Nano System has recently received an order from Nova Drilling Services for a custom UV/CO2 laser drilling machine to be built at Nano System’s made-to-order laser application facility in Manchester, New Hampshire.

Nova Drilling is receiving increased requests from their customers for small via laser drilling for variety of materials. Nova Drilling will be capable of supporting these customer requirements because the new machine, which will be built on the NS1-3200 series laser processing platform, will be equipped with both a UV and CO2 laser source. The NS1-3200 series is an industrial platform that allows Nano System to tailor each system to fit the specific needs of the customer's process and will be configured for maximum production throughput.

Utilizing a state of the art machine control architecture and NC interface, the NS1-3200 will control and synchronize laser interpolated firing across multiple axes of motion. This will provide unprecedented accuracy for drilling, skiving, trimming and thin film patterning processes. The platform will also provide Nova Drilling with stability for existing operations as well as flexibility for the future growth as technology shifts with future laser developments.

Nova Drilling Services’ Vice President Mike Doherty comments, ”Nova Drilling and Fabrication has been working with Sam Sekine for over 25 years, purchasing vision and drilling machines. We are looking forward to our purchase of the UV/C02 Laser Drill and Router from Nano System that will take our laser service to the next level.”

For more information on Nano System’s custom laser solutions contact Sam Sekine at sam.sekine@nanosys-usa.com.

About Nano System

Nano System Inc. is the North American distributor for Tongtai Machine & Tool of Taiwan, the leading manufacturer of CNC machine tools in Asia for the PCB and other industries.  President and Chief Executive Officer Osamu “Sam” Sekine has witnessed the growth of the printed circuit industry worldwide for many years and understands that change is inevitable in a market driven by technological advances in order to meet the ever-demanding requirements of the industrial and consumer marketplaces. In addition to distributing the Tongtai line of mechanical drilling and routing machines, Nano System operates a facility in Milpitas, CA and Manchester, N.H., for designing, developing and manufacturing custom laser systems. More information is available at: www.nanosys-usa.com.

Share

Print


Suggested Items

Future Trends in Flying Probe Testing

11/29/2019 | I-Connect007 Editorial Team
Peter Brandt, director of sales for Europe and Japan at atg, sits down with Pete Starkey and Barry Matties, gives his views on market requirements and testing technologies, and explains how flying probe testing is becoming the industry standard at all levels of production—and in many cases, the only practicable solution.

Pollution Prevention Techniques: Rinse Water Reduction

08/30/2019 | Peter Moleux with contributions from Happy Holden
There are five general categories of common techniques for pollution prevention in a PCB fabrication facility: new processes to replace sources of pollution; extend the bath’s life; rinse water reduction; dragout reduction; and ventilation reduction. While this list is not all-inclusive, it provides an overview of the types of technologies used around the world that are important to consider. This article, examines rinse water reduction.

EPA, Industry Come Together in Visit to TTM Facility

07/18/2019 | Kelly Scanlon, director, EHS policy and research
IPC member TTM Technologies is proud to show off the new wastewater-treatment system at its Sterling, Virginia plant, which is helping to enhance the company’s pollution prevention and resource recovery performance.



Copyright © 2019 I-Connect007. All rights reserved.