Flexible, Stretchable, and Wearable: If You Can Dream it, You Can Create it!


Reading time ( words)

It seems that flex circuit technology is definitely coming into its own. The market for flex circuitry has always been growing, but now it is rapidly accelerating, with new technologies and new applications in the news nearly every day. Flex is not just in your laptop and camera anymore, it is in your car, in space, and on your body. In other words, flex is everywhere.

We originally intended this issue to be centered on flexible circuits, but it quickly became apparent that we needed to broaden the scope and include all (well, at least some) of the new and exciting things going on these days in the world of flexible everything. As such, we have garnered a trove of authors, with much information to impart on the above mentioned.

Our cover story from OM Group discusses the processing of flex materials using a stress-free plating technology for both flex and rigid-flex materials.

Then, Dr. Joan Vrtis of Multek gives a great market overview of that relatively new industry most often called ‘wearables.’ She points out that wearables are not new, but when combined with electronics, this industry is only limited by the imagination, as the technology to make it happen is rapidly evolving.

Looking at another flex industry segment (flex segmented!), Maarten Cauwe and co-authors from imec pull our interest in a different direction as they explore two technologies for flexible and stretchable circuits in space applications.

So back to the beginning: Two articles discuss new materials to help make some of this happen. Panasonic’s Yoshioka et al., present a high-performance substrate for stretchable electronics, while Dupont’s Sidney Cox discusses a new flex material for high-temperature
applications.

Also on the topic of the processing of flex materials, Patrick Riechel of ESI reviews three technologies for microvia drilling and cutting. Rounding out the processing topic is columnist Todd Kolmodin with a brief overview on testing flex circuits.

This month is a perfect time to introduce our two newest columnists, who will become regular contributors to our Flex007 Weekly Newsletter that publishes every Thursday. As her first subject, Tara Dunn of Omni PCB chose “Flex-to-Fit”—another flex industry subset that is only limited by the imagination.

And last but not least, Dave Becker of All Flex presents his summary of wearable technology. There’s a lot going on in flexible, stretchable, wearable technology and there is much to learn!

Read The June Issue Of The PCB Magazine Here

Share




Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

05/13/2022 | Nolan Johnson, I-Connect007
The big news in the industry this week was the new bill introduced to the U.S. Congress in support of the PCB manufacturing industry. The Supporting American Printed Circuit Boards Act of 2022, which was introduced by Reps. Anna Eshoo (D-CA) and Blake Moore (R-UT), incentivizes “purchases of domestically produced PCBs as well as industry investments in factories, equipment, workforce training, and research and development.” The bill is a PCB-oriented complement to the semiconductor-oriented CHIPS Act of 2021.

A Game Plan for Upskilling Your Fab Workforce

05/10/2022 | I-Connect007 Editorial Team
There’s been a lot of talk among PCB manufacturers about the need to upskill their workforce. But where do you start—do you set up your own program or send staff to third-party training centers? We asked David Hernandez, IPC vice president of education, to weigh in on this topic, and the criteria that goes into creating IPC training programs. In addition to upskilling strategies, David also delves into the need for our industry to develop a labor pipeline, as well as the challenges we face in hiring, training, and retaining employees in this industry during a tight labor market.

I-Connect007 Editor's Choice: Five Must-Reads for the Week

04/29/2022 | Nolan Johnson, I-Connect007
It certainly seems that our times continue to be interesting, don’t they? Just how many different flavors of supply chain disruption can we come up with? Investment on the supply side needs to increase, but the size of the labor force needs to increase even more, if we want to accomplish the task of the buildout itself, let alone running the facilities properly.



Copyright © 2022 I-Connect007. All rights reserved.