HDPUG and High-Frequency Test Methodologies


Reading time ( words)

CEO Brian Butler talks with Guest Editor Bob Neves about the HDP User Group, an industry consortium that is developing test methodologies and programs. Brian decribes three of the current subcommittees: Material Characterization; Back Drill, having to do with defect detection and reliability; and Copper Surface Roughness.

To watch the video, click here.

Share

Print


Suggested Items

Promoting a Circular Economy in Electronics Manufacturing

09/03/2020 | Pete Starkey, I-Connect007
The sixth international Electronics Goes Green Conference was held as an online virtual. Pete Starkey provides a recap of the event, which provided insight into innovative eco-design and extended reliability from the perspective of iNEMI’s roadmap.

IPC Europe Shares Technical Education and Standards Awareness

04/22/2020 | Pete Starkey, I-Connect007
Against a background of COVID-19 uncertainty and unprecedented challenges, but recognizing the vital importance of continuing to educate engineers and share the knowledge and skills required to manufacture boards and assemblies of the highest yields and reliability, the IPC Europe team hosted a technical webinar for the European electronics industry, featuring the expertise of two of I-Connect007’s regular columnists: Mike Carano and Jan Pedersen. Pete Starkey provides an overview.

A Guide to High-reliability PCBs from Design to Specification

07/24/2019 | Jeff Beauchamp, NCAB Group
Creating reliable PCBs is an outcome of considering all aspects that can affect reliability as early as possible in the design process. The further down the design process, the more expensive and risky it can be to fix. As they say, everything starts with the design. Because a good board design improves the reliability of the end product and lessens the risk of failure.



Copyright © 2020 I-Connect007. All rights reserved.