ESI Supplies Model 5335 Laser Processing System to PFC


Reading time ( words)

Electro Scientific Industries, Inc., an innovator in laser-based manufacturing solutions for the micro-machining industry, today announced that PFC Flexible Circuits Limited has selected the Model 5335 Laser Processing System to expand its high density interconnect (HDI) flexible circuit manufacturing capabilities. Based in Scarborough, Ont., Canada, PFC is a North American leader in flexible circuit design, manufacture and assembly.

“PFC has been supplying fine line technology for the past eight years. Now, with the addition of the Model 5335, we can support true HDI flex technologies,” said Steve Kelly, President of PFC Flexible Circuits. “This laser processing system from ESI will allow us to make smaller vias, blind and buried vias, and to cut smaller features in HDI circuits. We’re seeing strong market interest in HDI across multiple industries ranging from consumer and medical devices to military and aerospace.”

PFC chose the ESI Model 5335 in part because of its high throughput capabilities compared to alternatives. For example, the ESI Model 5335 can drill 50 micron blind vias at a rate of 32,000 holes per minute. This performance is made possible by Third Dynamics™, a patented high-speed beam positioning technology that enables fast and accurate routing and drilling of flexible circuits.

“We were looking to update our drilling technology without losing throughput,” said Anish Somaiya, Vice President, PFC Flexible Circuits. “The Model 5335 not only will significantly increase our drilling throughput and give us a technological edge over many of our competitors but also will save floor space in our drilling area.”

The ESI Model 53XX family is widely regarded as the industry standard for laser processing across the flexible circuit and interconnect industry. Over 1,200 ESI laser processing systems are installed worldwide and are in use at nine of the top 10 flex circuit manufacturers. These systems offer industry-leading drill, routing, patterning, and skiving performance.

“We are extremely pleased that PFC has decided to incorporate ESI laser processing technology into its HDI and flexible circuit manufacturing processes,” said Ed Grady, CEO of ESI. “We look forward to being a part of PFC’s long-term success and helping them meet their most challenging customer demands.”

About PFC

PFC Flexible Circuits designs, manufactures and assembles flexible printed circuits, all under one roof. Circuit types include single- and double-sided, multi-layer and rigid flex. PFC can provide 50 micron line and space in production and assemble circuits using 1005 components. Specialties include high-speed low-loss, impedance-controlled circuits. PFC offers a large library of UL approved materials and is ISO 9001 and 13485 approved. For more information go to: www.pfcflex.com.

About ESI

ESI's integrated solutions allow industrial designers and process engineers to control the power of laser light to transform materials in ways that differentiate their consumer electronics, wearable devices, semiconductor circuits and high-precision components for market advantage. ESI's laser-based manufacturing solutions feature the micro-machining industry's highest precision and speed, and target the lowest total cost of ownership. ESI is headquartered in Portland, Ore., with global operations from the Pacific Northwest to the Pacific Rim. More information is available at www.esi.com.

Share

Print


Suggested Items

The Institute of Circuit Technology Autumn Seminar

10/03/2019 | Pete Starkey, I-Connect007
Meriden has been established as a popular Midlands venue for Institute of Circuit Technology (ICT) meetings. On September 19, a multitude of Fellows, Members, and Associates gathered for the Institute’s autumn seminar, which was organised and hosted by ICT Technical Director Bill Wilkie. The agenda included five informative technical presentations, describing current research and development on significant topics relevant to the industry.

How to Feed Test Data Back to Engineering for Process Improvement

08/01/2019 | Todd Kolmodin, Gardien Services
Some people think of the PCB manufacturing process as a black box: design data goes to the manufacturer (fabrication house), and magically, the finished PCB is produced. While it may have been like that in the past, in actuality, fabricating PCBs today is quite a ballet of processes.

A Guide to High-reliability PCBs from Design to Specification

07/24/2019 | Jeff Beauchamp, NCAB Group
Creating reliable PCBs is an outcome of considering all aspects that can affect reliability as early as possible in the design process. The further down the design process, the more expensive and risky it can be to fix. As they say, everything starts with the design. Because a good board design improves the reliability of the end product and lessens the risk of failure.



Copyright © 2019 I-Connect007. All rights reserved.