-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
IPC-A-610: What's New With Rev F?
July 22, 2015 | Leo Lambert, EPTACEstimated reading time: 2 minutes
IPC generates many specifications related to printed circuit board fabrication, assembly processes and inspection criteria. The intent of the following article is to describe how the documents come about and how they are generated by providing an overview of the latest changes in IPC-A-610, Acceptability of Electronic Assemblies, hereafter identified as 610. Additionally, there are online courses available that will go through each one of these changes in details.
Background
Why are new revisions created? Can’t IPC just issue updates to the existing revision? Who defines what the changes are going to be and who approves of those changes? Why can’t they make changes for all the new technologies available? And the best question of all: Why does my product have some conditions that are not covered in the documents and specifications?
Taking just one document, 610, and trying to answer those questions will hopefully provide a window for customers, users, and manufacturers to see where these documents come from and how they are put together to upgrade the products being made, and hopefully improve the quality of those products.
Every five years, a new revision is created for all the specifications from IPC. This was mandated for all ANSI approved documents. Since many IPC documents were ANSI-approved, they had to be reviewed and updated on a regular basis, in our case five years. There are multitudes of implications with the release of new revisions. They include, but are not limited to: contract negotiations, purchasing of new specifications, and development of new certification training programs to cover the requirements of those documents for the trainers and the specialist. This is all accomplished by attending the semiannual meetings of IPC and participating in the task group meetings, where all the new information is presented, all the comments are reviewed to correct deficiencies in the existing revision, and all conflicting information is reviewed to verify that complementary documents are in agreement for criteria information.
Once all the information is reviewed and accepted by the committee, a draft is sent to the IPC community for review and comment. Once again there is a review and discussion on the comments, and subsequently another draft is created and the process repeats itself until all the comments are resolved and a new document is published.
Creating updates to the documents is also handled in the same fashion, and since the comments are considered critical, the review period is shorten to enhance the speed to which the approval cycle is made and then the documents are published for the user community. This is a relatively short process as it only addresses critical issues to the main body of the document.
So, what defines the changes? First, comments from the user community as found on the comment sheet in the back of every IPC specification. Second, submittal from the component manufacturers on new components being introduced for new technology applications. Finally, corrections needed from editorial and technical mishaps in the existing documents.
To read this entire article, which appeared in the June 2015 issue of The PCB Design Magazine, click here.
Suggested Items
Two Long-time IPC Volunteers Receive Dieter Bergman IPC Fellowship Award
04/17/2024 | IPCThe Dieter Bergman IPC Fellowship award was presented to two IPC volunteers at IPC APEX EXPO 2024. The award recipients have fostered a collaborative spirit, made significant contributions to standards development, and have consistently demonstrated a commitment to global standardization efforts. Tiberiu Baranyi and Zhiman Chen were chosen as award recipients as they embody the work ethic and spirit of the late Dieter Bergman, an industry pioneer and icon. As part of the award, they bestowed Dieter Bergman Memorial Scholarships to the university or college of their choice.
Real Time with... IPC APEX EXPO 2024: MYCRONIC's Evolution and New Solutions
04/17/2024 | Real Time with...IPC APEX EXPOHenry Crandall interviews Kevin Clue, the vice president of global sales for MYCRONIC's High Flex division. They discuss the company's evolution, emphasizing its strong customer relationships and its role as a versatile, turnkey solution provider. Kevin unveils new solutions launched at IPC APEX EXPO, including an AI-integrated inspection system and the A40 pick-and-place platform. The conversation also touches on the increased use of AI and deep learning.
Three Industry Leaders Receive IPC President’s Award
04/17/2024 | IPCIn recognition of their leadership and significant contributions of time and talent to IPC and the electronics industry, three IPC volunteers were presented with the IPC President’s Award at IPC APEX EXPO in Anaheim, Calif., on April 9, 2024.
Phil Kinner Pushes His Limits in Engineering and Running
04/17/2024 | Linda Stepanich, IPCEngineers break things on purpose. They like the challenge of putting things back together and making them stronger and more resilient. The skills engineers use to build products can also be used to rebuild their lives after a personal loss, something Phil Kinner learned when he laced up his running shoes after many years of a sedentary lifestyle.
Marcy's Musings: The Growing Industry
04/16/2024 | Marcy LaRont -- Column: Marcy's MusingsAfter decades of steady decline in the U.S. and Europe, the PCB industry is finally growing, especially in China Plus One countries. The U.S. for example, which seemed to have abdicated its title as the world leader in innovating high-technology cutting-edge manufacturing processes, is now in a race to regain what it lost and then some. The PCB fabrication industry is growing in the West, thanks to DoD funding, the CHIPS and Science Act, and hopefully, the passing of HR 3249, the Printed Circuit Board and Substrates Act.