Eliminate Connectors with Sculptured Flex


Reading time ( words)

In a previous column, I discussed connectors for flexible circuits and the various options that are available. One of the options is very popular because in reality it is a “connector-less” connector. The connector pins are actually fabricated as part of the flexible circuit, as opposed to being an assembled component.

This option uses sculptured flex. A sculptured flexible circuit has unsupported metal traces.  These protruding traces act as the male pin part of the connector. The technology for fabricating a sculptured circuit is fairly unique in the industry.    All Flex starts with thick copper (as thick as 7 ounces which can be plated up from there with copper, tin, solder, gold or other metals). The rest of the traces are etched down to achieve thicknesses that are consistent with good flexibility. Back-bared fabrication is used so that there is no need to remove the dielectric with laser ablation or routing. To fabricate a back-bared flexible circuit, the base dielectric is pre-punched or drilled to expose the metal traces that will form the connector pins.

Sculptured_Flex2.JPGFigure 1: Sculptured flexible circuit.

 Sculptured circuits have a number of advantages:

  • Better reliability: There is no assembly or junction point that could weaken so these connector pins hold up better to vibration testing or thermal cycling.
  • Less costly: The connector component is eliminated along with the labor to attach it.
  • Weight and space: Because a connector component is eliminated, the flexible circuit assembly weighs less and takes up less space.
  • Configurability: There are significant choices in terms of number of pins, density of pins and even thickness and length. They can be bent for 90-degree or 45-degree insertion.
  • Surface finishing: Leads can be plated with tin, tin-lead, gold or other surface finishes.

Sculptured_Flex1.JPGFigure 2: Actual sculptured flex circuit.

Any time you eliminate a component, hidden costs are eliminated, such as the cost of stocking, tracking and managing the supply chain for that part number. When designing an electronic package, don’t assume that you need a component for every connection point. Sculptured flex will give some options that can make your electronic package, lighter, less costly, more reliable, and take up less space.

Dave Becker is vice president of sales and marketing at All Flex Flexible Circuits LLC.

Share




Suggested Items

EIPC Summer Conference 2022: Day 2 Review

06/29/2022 | Pete Starkey, I-Connect007
Örebro, Sweden on June 15 brought a bright and early start to Day 2 of the EIPC Summer Conference for those who had enjoyed the previous evening’s networking dinner, but had resisted the temptation to over-indulge or to carry on their long-awaited catch-up conversations with old friends into the small hours. All but a few were in their seats for 9 a.m., awake and attentive for Session 4 of the conference, on the theme of new process technologies, moderated by Martyn Gaudion, CEO of Polar Instruments.

Technica Heats Up ROI Discussion

05/17/2022 | I-Connect007 Editorial Team
The I-Connect007 Editorial Team speaks with Technica’s Frank Medina, Ed Carrigan, and Jason Perry about trending hotspots that provide the PCB fabricator a high return on investment (ROI). A theme that carries throughout the conversation is that traditional methods for calculating ROI are being replaced by models that include more qualitative factors.

EIPC Technical Snapshot: Supporting Autonomous Driving

05/12/2022 | Pete Starkey, I-Connect007
EIPC’s 17th Technical Snapshot webinar on May 4 focused on developments in automotive electronics, particularly on advances in the technologies required to support the evolution of autonomous driving. The team brought together two expert speakers to present their detailed views on topics encompassed within “CASE,” the acronym that appears to be taking over the automotive industry.



Copyright © 2022 I-Connect007. All rights reserved.