Rogers to Participate in European Microwave Week 2015


Reading time ( words)

rogers.jpgRogers Corporation will be a major participant in European Microwave Week 2015 (EuMW 2015), Europe’s largest trade show devoted to RF/microwave technology and applications. The conference and exhibition run September 6-11, 2015 at the Palais des Congres, Paris, France. EuMW 2015 includes the 45th European Microwave Conference, the 10th European Microwave Integrated Circuits Conference (EuMIC 2015), the 12th European Radar Conference (EuRAD 2015), and a large exhibition floor.

See Rogers Advanced Connectivity Solutions at Booth 263

Rogers ACS will be exhibiting in Booth 263 Sept. 8-10. Stop by and let us help with advice and design information concerning our high-performance printed-circuit-board (PCB) materials, including RO3003™ laminates. RO3003 laminates have tightly controlled dielectric constant (3.04+/-0.04 at 10GHZ) and very stable dielectric constant performance over temperature (-3 ppm/°C from -50°C to 150°C). The RO3003 PTFE-ceramic composite resin system enables very low dielectric loss (0.0010 at 10GHZ), and laminates can be purchased with rolled copper to further enhance PCB insertion loss performance. Due to its excellent electrical properties, RO3003 laminates are often chosen for millimeter wave applications such as 77-79GHZ automotive radar sensors and 60GHz point to point backhaul applications.

Rogers + Arlon

Visitors to the exhibition booth can also learn about the recent acquisition of material supplier Arlon, LLC. The Arlon business is well established as a top supplier of high-frequency circuit materials and engineered silicone materials and is an excellent strategic fit with our PCB materials and high-performance elastomers. The acquisition adds to the materials diversification and expertise at Rogers and benefits customers with a significantly expanded choice in high-performance materials.

Rogers’ John Coonrod to Present at Tech Conference & MicroApps

John Coonrod, Technical Marketing Manager at Rogers Advanced Connectivity Solutions & author of the popular ROG Blog series, will deliver four presentations: one during the Microwave Conference and three MicroApps presentations on the exhibition floor.

The conference presentation, scheduled for 8:30-8:50 AM on Wednesday, September 9, will be of interest to designers and users of high-frequency filters and PCB material specifiers: “Applied Methodology for Harmonic Suppression of Microstrip Edge Coupled Bandpass Filters Using Composite Circuit Materials.”

Coonrod will also deliver three different MicroApps presentations during EuMW 2015:

  • “Composite Circuit Materials Used to Suppress Harmonic Modes in Microstrip Edge Coupled Filters” (Tuesday, September 8, 13:00)
  • “Microwave PCB Structure Selection: Microstrip Versus Grounded Coplanar Waveguide” (Wednesday, September 9, 14:30)
  • “PCB Fabrication Influences on Microwave Performance” (Thursday, September 10, 15:30)

Rogers Corporation is a Founding Member of RF Energy Alliance

The RF Energy Alliance (RFEA) is standardizing, promoting, and educating audiences in solid-state RF energy—a clean, highly efficient, and controllable heat and power source. Members envision a fast-growing, innovative marketplace built around this sustainable technology, contributing to quality of life across many applications. As a founding member, Rogers Corp. will host RFEA’s Dr. Klaus Werner as he presents the state of the Alliance at 11:30 on Wednesday, September 9, and at 11:30 on Thursday, September 10 at booth 263.

Share

Print


Suggested Items

Advances in Substrates for Thermal Management

02/13/2020 | Pete Starkey, I-Connect007
Pete Starkey and Eduardo Benmayor, general manager for Aismalibar, discuss ways in which insulated metal substrates have been modified to relieve stresses on the solder joints of high-end LED assemblies during thermal cycling. Eduardo also describes a range of thermally conductive FR-4 laminates that can be processed like standard FR-4 for applications where thermal dissipation can be maximized without changing the design.

Not All Plating Lines Are Created Equal

02/12/2020 | I-Connect007 Editorial Team
Barry Matties and Happy Holden met with CEO Michael Ludy and CMO Sarah Großmann from Ludy, a company specializing in galvanic plating equipment for PCBs. This interview gives an overview of Ludy and their latest advancements in PCB plating equipment.

AT&S: Working With Designers on a Global Level

02/05/2020 | Barry Matties, I-Connect007
Barry Matties recently took a tour of AT&S’s Austrian factory, which is developing new circuit design strategies surrounding embedded and active components. Gerald Weis discusses the company’s focus on serving and educating PCB designers around the world, as well as their plans to embrace the latest technology and Industry 4.0 processes going forward.



Copyright © 2020 I-Connect007. All rights reserved.