FTG's Circuits Segment Posts 31% Sales Growth in Q3


Reading time ( words)

Firan Technology Group Corporation today announced financial results for the third quarter 2015.

  • Grew Q3 2015 sales to $18.2M, a 23% increase over Q3 2014
  • R&D spending exceeded 8% of sales in Q3 2015
  • Recorded Q3 2015 profit of $1.6M, an increase of 647% compared to Q3 2014
  • Trailing twelve month earnings per share (diluted) are now $0.21
  • Cash flow from operations in the quarter was $2.6M

“The third quarter of 2015 saw continued strong performance for FTG as a result of past investments in technology, positive impacts from past key new program wins as well as the strengthening of the US dollar,” stated Brad Bourne, President and Chief Executive Officer. He added, “These record results are enabling us to report strong earnings while still investing in our future.  In the quarter, development continued on control panel assembly programs for the Chinese C919 aircraft and another helicopter related program for a US customer.  We continued to invest in R&D across the Corporation to improve our products, our processes and our ability to meet the future demands of our customers.”

Business Highlights

FTG accomplished many goals in the third quarter of 2015 that continue to improve the Corporation and position it for the future, including:

  • Received airworthiness tags from Civil Aviation Authority of China (CAAC) for control panel assemblies for the C919 aircraft under development by COMAC
  • Shipped engineering breadboard units of control panel assembly under development for a helicopter program
  • Achieved sales outside of North America of 20% of total sales
  • Renewed NADCAP certification at Circuits Chatsworth
  • Successfully completed annual AS9100C audit in Circuits Toronto

For FTG, overall sales increased by $3.4M or 23% from $14.8M in Q3 2014 to $18.2M in Q3 2015.  Both business segments participated in the growth.  Revenues also benefited from the weakening of the Canadian dollar versus the US dollar which was down 19 cents in Q3 2015 versus the same quarter last year.  Over 80% of FTG’s revenues are denominated in US dollars.  US dollar currency hedges in place in the quarter reduced reported sales and earnings by $0.7M.  As a result, approximately 13% of the growth was due to the weakening of the Canadian dollar and 10% was increased activity.  For the year-to-date, sales were up $9.1M or 21%. 

The Circuits Segment sales were up $3.3M or 31% in Q3 2015 versus Q3 2014.  All facilities reported increased revenues.  On a year-to-date basis, Circuits sales were up $7.4M or 23%.

For the Aerospace segment, sales in Q3 2015 were $4.3M compared to $4.2M in the same quarter last year resulting in a 3% growth rate. On a year-to-date basis, Aerospace sales were up $1.7M or 15%.

Gross margins in Q3 2015 were up $1.7M compared to Q3 2014, as a result of increased sales.  Again, the currency hedges that matured in the quarter reduced revenue and therefore margins and earnings were reduced by $0.7M.

Earnings before interest, tax, depreciation and amortization (EBITDA) for FTG for trailing twelve months is $7.1M, an increase from $5.6M from previous quarter.

Net profit at FTG in Q3 2015 was $1.6M compared to a net profit of $0.2M in Q3 2014.  This improvement is the result of higher gross margins and foreign exchange gains, offset by higher SG&A and R&D spending.

The Circuits segment net earnings before corporate, interest and other costs was $2.1M in Q3 2015 compared to $0.9M in Q3 2014.  The Circuits joint venture in China did not have a material impact on profitability.

The Aerospace net earnings before corporate, interest and other costs was $0.0M in Q3 2015 versus $0.0M in Q3 2014. Costs related to the development of the C919 cockpit assemblies and one new program of $0.6M in Q3 2015 were treated as deferred development and not expensed.

Cash flow from operations after investments in capital equipment and deferred development in Q3 2015 was $2.6M compared with a usage of $0.4M in Q3 2014.  For the year-to-date, cash flow was $2.8M in 2015 compared to $1.8M in 2014.

As at August 28, 2015, the Corporation’s net working capital was $14.5M, an increase of $2.0M over Q3 2014, primarily due to higher cash, accounts receivable and inventories offset by higher accounts payable.

About Firan Technology Group Corporation

FTG is an aerospace and defense electronics product and subsystem supplier to customers around the globe.  FTG has two operating units:

FTG Circuits is a manufacturer of high technology, high reliability printed circuit boards.  Our customers are leaders in the aviation, defense, and high technology industries.  FTG Circuits has operations in Toronto, Ontario, Chatsworth, California and a joint venture in Tianjin, China.

FTG Aerospace manufactures illuminated cockpit panels, keyboards and sub-assemblies for original equipment manufacturers of aerospace and defense equipment.   FTG Aerospace has operations in Toronto, Ontario, Chatsworth, California and Tianjin, China.

Share

Print


Suggested Items

EPA, Industry Come Together in Visit to TTM Facility

07/18/2019 | Kelly Scanlon, director, EHS policy and research
IPC member TTM Technologies is proud to show off the new wastewater-treatment system at its Sterling, Virginia plant, which is helping to enhance the company’s pollution prevention and resource recovery performance.

Dissecting the IPC Regional Survey on PCB Technology Trends

07/15/2019 | I-Connect007 Editorial Team
Sharon Starr, Denny Fritz, and Mike Carano talk about the global 2018 IPC Technology Trends Report released early this year—the size of the survey, how it was conducted, the general findings, and regional differences. They also shared their takeaways and regional insights, and the industry outlook over the next five to 10 years.

Identifying Product Board Class and Pre-quote Software

07/09/2019 | Mark Thompson, CID, Prototron Circuits
Deciding on the class of the final product will determine what files are needed for fabrication and assembly. It is critical to note that for a product to be built to any class level, it must be designed to that class level from its inception.



Copyright © 2019 I-Connect007. All rights reserved.