Prototron Circuits Takes Part in Austin SMTA


Reading time ( words)

Russ Adams, Prototron Circuits’ national sales manager announced that his company will be exhibiting at this year’s SMTA Austin Expo and Tech Forum which will be held at The Norris Conference Center in Austin, Texas on Tuesday, Oct. 20, 2015.

“This is an important show for us because Austin is one of the country’s leading regions for new product development which incidentally is exactly the kind of business we support with our quick turn prototype PCB service. We always get business out of this show,” Adams said.

About Prototron

In business since 1987, Prototron is one of the industry leaders when it comes to high-technology quick-turn printed circuit boards. Their continued outstanding performance (98%+ Quality and Delivery) has made them a preferred source of all companies needing reliable QTA PCBs. Prototron Circuits is truly America’s board shop.

Prototron has facilities in Redmond, Washington and Tucson, Arizona. Visit www.prototron.com

Share

Print


Suggested Items

Joe O’Neil: Green Circuits Running Strong Under Current Social Restrictions

06/01/2020 | Nolan Johnson, PCB007
On May 28, Joe O’Neil, CEO of Green Circuits, updated Nolan Johnson on how the company continues to operate during the COVID-19 restrictions. O’Neil reflects on the rapid chain of events this past March when lockdowns were instituted in the San Francisco Bay area. After a brief but rapid shutdown, Green Circuits was back up and in production.

iNEMI’s PCB Roadmap Explained

05/01/2020 | Pete Starkey, I-Connect007
In an informative and enlightening webinar, iNEMI Project Manager Steve Payne was joined by Isola Group CTO Ed Kelley to explain, review, and discuss the details of the recently published “iNEMI 2019 Roadmap for Organic PCBs.” Pete Starkey provides an overview.

Flex Standards Update With Nick Koop

11/21/2019 | Andy Shaughnessy, Design007 Magazine
This month, I interviewed Nick Koop—director of flex technology at TTM Technologies, a veteran “flex guy” and instructor, and a leader of several IPC flex standards committees. Nick provides an update for the committees he’s involved with and discusses some of the challenges that he sees as more designers enter the world of flex.



Copyright © 2020 I-Connect007. All rights reserved.