AT&S Joins LEEN Network of Energie Steiermark


Reading time ( words)

Together with nine large industrial enterprises, Styrian energy provider Energie Steiermark is starting a new network, which is intended to reduce the companies’ energy consumption by up to 3% annually. LEEN (Learning Energy Efficiency Network) will run for four years and is based on targeted collaboration between the participants. At regular meetings and specialist presentations, the companies will learn from one another in order to use their individual savings potential even better, for example in the areas of compressed air, cogeneration, and electric drives.

One of the participants in the LEEN Network is the Styrian high-end printed circuit board producer AT&S. AT&S COO Heinz Moitzi is convinced of the purpose of this network and considers it a crucial lever to reduce energy consumption at AT&S even further: “For a globally producing industrial enterprise like AT&S, the reduction of energy consumption is of enormous economic and ecological importance. Based on our mission ‘We reduce our ecological footprint’ we have set ourselves ambitious reduction goals for CO2 and fresh water consumption and have already accomplished some significant savings. However, we are currently reaching our limits. Therefore, we welcome the LEEN initiative, which was launched by Energie Steiermark. With the LEEN Network we expect further significant savings potential that supports our reduction targets. Mutual networking with the participating companies, the exchange of experience and the professional support by LEEN are very valuable in this process.”

Besides AT&S, Styrian companies including Stahl Judenburg, Tondach Gleinstätten, Sattler AG, ATB Motorenwerke, Styromagnesit, Wuppermann Austria, Obersteirische Molkerei and Landena Handelsgesellschaft.m.b.H. are part of the LEEN Network.

The network is supported by LEEN GmbH in Karlsruhe, which already manages more than 30 similar networks in Germany and has implemented a total of far more than 4000 individual energy efficiency measures.

Share

Print


Suggested Items

Just Ask Happy: The Future of Mechanical Blind, Buried Vias

06/26/2020 | I-Connect007 Editorial Team
We asked for you to send in your questions for Happy Holden, and you took us up on it! The questions you've posed run the gamut, covering technology, the worldwide fab market, and everything in between. Enjoy.

Advantages of Using ZIF Connectors as a Termination Method

03/17/2020 | All Flex
There are many types of connectors and termination methods available when designing a flexible circuit. One of the most common is the zero insertion force (ZIF) connector. The reason why the ZIF connector is so popular is that they eliminate the requirement for an added connector. They create a direct connection from the circuit to the mating connector reducing overall weight and cost. Here are a few general facts about ZIF connectors.

Congratulations to Mike Carano! Dieter Bergman IPC Fellowship Award Recipient

03/09/2020 | Patty Goldman, I-Connect007
Patty Goldman spoke with Mike Carano about being awarded the Dieter Bergman IPC Fellowship Award, what that means to him as someone who was inspired by Dieter, and after 40 years in the industry, what keeps him excited going forward. Talking with Mike, one can feel his enthusiasm for IPC and the industry, which is contagious.



Copyright © 2020 I-Connect007. All rights reserved.