Marcy's Musings: The Growing Industry
It’s Only Common Sense: Here’s What To Do After IPC APEX EXPO 2024
Dan’s Biz Bookshelf: Seeing the HowPNC Boosts Quality by Acquiring Real-time X-Ray Inspection System
December 8, 2015 | PNCEstimated reading time: 1 minute
PNC recently acquired a new X-Ray inspection system, the Jewel Box 70T from Glenbrook Technologies.
"Our focus is always 0n bringing the best quality possible to our customer and this systems is the best on the market to assure that we make that happen," says Sam Sangani, president and owner of PNC.
The system has an 80KV micron focal spot X-ray tube for up to 500X geometric and 1,200X electronic magnification. It allows x-y-z movement rotation and tilt with joy stick positioning. It can accommodate a 16x18 inch panel.
About PNC
Based in Nutley, New Jersey, PNC is one of the country’s leading providers of Rigid, Rigid-Flex and Flex Printed Circuit Boards and the largest PCB supplier in the region. They are committed to providing their customers with innovative solutions for their PCB fabrication and assembly needs. They are committed to working side-by-side with visionary engineers and buyers in all technologies including High Frequency RF/ Microwave boards; Audio, Defense Aerospace and Medical. The dare to take on demanding and challenging technologies including R&D projects. They combine the latest technology with American Innovation to deliver world class printed circuit board solutions including Design, Fabrication and assembly to their customers.
For more information go to www.pnconline.com.
Share on:
Suggested Items
PNC Inc. Purchases GA 75 VSD FF from Atlas Copco
07/15/2016 | PNC Inc.PNC Inc. recently made yet another investment in its pursuit to be as energy efficient as possible: the GA 75 VSD FF, 100 HP compressor.
IPC APEX EXPO: Design Through Box-Build Strategy Works for PNC Inc.
03/23/2016 | Real Time with...IPCGuest Editor Dan Beaulieu talks with PNC's production manager, Bhavesh Sangani, about PNC's "design through box-build" strategy along with their significant capital equipment purchases over the past few years for both PCB fabrication and assembly.