productronica 2015: Isola Supports Developments in Automotive Electronics


Reading time ( words)

Helmut Kroener gives a perspective on Isola’s European market, whose major segments are industrial and automotive electronics. Driver assistance systems are a huge growth market and demand cost-effective low-dielectric-constant materials capable of 100 gigahertz operation. Developments in electromobility involve high power and require materials to carry high currents at high operating temperatures. Isola are positioned to meet these needs both locally and globally.

Watch the interview here.

Share




Suggested Items

Today’s M&A: Right on Target

08/09/2022 | Nolan Johnson, I-Connect007
In this enlightening conversation with M&A specialist Tom Kastner, Nolan Johnson learns that it’s a buyer’s market—and a seller’s market too. This sets up an interesting dynamic no matter which side you might be on. What trends are in play that have led to this situation and how can you make the most of it? Tom shares valuable insights that will get you thinking and planning your own strategies.

Challenges of the 2022 PCB Market: The Party’s Over

08/08/2022 | Pete Starkey, I-Connect007
With his knowledgeable insight into the business and technology of the printed circuit industry, Dr. Shiuh-Kao Chiang, managing partner at Prismark Partners, has put a global perspective on the challenges of the 2022 PCB market. His presentation at the EIPC Summer Conference in Orebro, Sweden, on June 14 was eagerly awaited by an attentive audience, keen to share his vision. From his comments, it was clear that 2022 will be an interesting year and does not appear particularly friendly for the PCB business.

Plating on Silver: What’s Old is New Again

07/07/2022 | Denis Jacques, Technic Inc.
About three decades ago, immersion silver, a nitrate-based process, gained a lot of market share in the world of PCB final finishes. More economical than ENIG, flat, solderable, and conductive, it had everything going for it—everything but corrosion resistance in a harsh environment, that is. Champagne voids were also an issue, along with line reduction. But the worst drawback, the characteristic that made the part short over time, was creep corrosion. A build-up of copper sulfide salt that grows in contact with a sulfur-rich environment, heat, and moisture resulted in failures in the field. This was enough to scar the process for good.



Copyright © 2022 I-Connect007. All rights reserved.