2015’s Most Read PCB Articles


Reading time ( words)

Coated Ultra-Thin Copper on Printed Circuit Laminate

Nano copper-based electronic ink and associated processing have been developed to create ultra-thin copper on flexible PCB substrates, allowing for much finer etch resolution and increased circuit density. The process is rapid and sufficiently low-temperature to allow deposition onto temperature-sensitive substrates such as polyimide, plastic and paper.

IMPACT 2015: An In-Depth Look

IPC understands that presenting a unified voice for the electronics industry is essential for advancing policies that affect the industry’s long-term future and strengthens the U.S. and global economy. that is why 22 IPC member-company executives descended on the nation’s capital for IMpact 2015: Ipc on capitol hill, IPC’s annual advocacy event.

A Cautionary Tale: Counterfeit Materials

John Ling of EIPC writes, “Risk from counterfeits wears many hats. There is reputational risk, which can be damaging; there is inherent safety risk, which could be fatal; and there is financial risk to the OEM, the PCB manufacturer, and the PCB broker. One way of minimizing risk is by dealing direct.”

Institute of Circuit Technology 41st Annual Symposium

ICT technical director Bill Wilkie has always excelled in locating interesting and unusual venues for the Institute of circuit technology annual Symposium, and this year was no exception. For the 2015 event, the 41st, he chose the Black Country Living Museum, an open-air museum of rebuilt historic buildings in the home of the original Industrial Revolution.

Share

Print


Suggested Items

Catching Up With RBP Chemical and Schlötter

01/20/2022 | Dan Beaulieu, D.B. Management Group
It’s always great to see two very good companies form a mutually beneficial alliance. I was lucky enough to watch this particular strategic partnership come to fruition this year between RBP Chemical and Schlötter. I wanted to talk to both companies, so I sat down with Matthias Hampel, global executive representative-PCB and electronics at Schlötter, and Ernest Litynski, president of RBP Chemical Technology, to get the inside story.

Technology and Development Prospects for the European Marketplace

01/18/2022 | Nolan Johnson, I-Connect007
Nolan Johnson speaks with Tarja Rapala-Virtanen technical director of the EIPC who breaks down the current state of the European market and which technologies and market segments are seeing growth.

A Tour of the New Isola Factory: Investing in North America

12/23/2021 | Barry Matties, I-Connect007
Barry Matties recently toured Isola’s new 118,000-square-foot low-volume, high-mix manufacturing facility in Chandler, Arizona. The facility’s construction began in 2020 and, like many building projects, was delayed because of the COVID-19 pandemic. Building a new factory during the pandemic was certainly a challenge but the team persevered and the new greenfield facility is now operating to meet the needs of the North American market. During the tour, Barry met with Travis Kelly, Ed Kelley, Sean Mirshafiei, Jenny Inocencio, and Walt Niziolek. They covered a range of topics, including lab operations, hiring, the supply chain, R&D, and the concept of the new facility. The factory was designed to extensively utilize automation to improve efficiencies and, as Travis Kelly stated, “to de-risk the labor shortage issue.”



Copyright © 2022 I-Connect007. All rights reserved.