FTG Circuits - Chatsworth California Qualified to MIL- PRF-31032


Reading time ( words)

The FTG Circuits - Chatsworth California facility (incorporated as FTG Circuits Inc.) has been qualified to the Department of Defense performance specification MIL-PRF-31032/3 (flexible printed wiring boards) and MIL-PRF-31032/4 (flex-rigid printed wiring boards).  MIL-PRF-31032 qualification also allows FTG Circuits - Chatsworth to continue to manufacture and certify products to MIL-PRF-50884.

Qualification to these specifications results in FTG Circuits - Chatsworth being listed on the DLA Qualified Manufacturing List (QML) that is used by existing and potential customers to select qualified suppliers of these product types.

The rigorous qualification process included DLA on-site audits, qualification of our testing laboratories, documentation audits, the manufacture of qualification test vehicles and environmental / reliability product testing.  

The qualified technical scope allows FTG Circuits - Chatsworth to manufacture and certify high technology (HDI) flex and flex rigid printed wiring boards that contain up to 35 layers, includes micro vias and a variety of surface finishes and other technical attributes. This advanced technical scope positions the site as one of the top two technically qualified flex / rigid flex manufacturers in the world. 

"MIL-PRF-31032 qualification is a very important milestone as it not only allows us to capture defense programs; it also demonstrates that FTG Circuits – Chatsworth is committed to continuous improvements in quality and reliability to meet the expectations of FTG’s Defense and Aerospace focused customer base." said Michael Labrador, President of FTG Circuits Inc.

"FTG is committed to Operational Excellence across the Corporation and the continuous improvement of our process controls, reliability and quality systems are an important part of these efforts." stated Brad Bourne, President and Chief Executive Officer of FTG Corporation. 

More information on the DLA and the MIL – PRF 31032 QML program can be found here.

About Firan Technology Group Corporation

FTG is an aerospace and defense electronics product and subsystem supplier to customers around the globe.  FTG has two operating units:

FTG Circuits is a manufacturer of high technology, high reliability printed circuit boards.  Our customers are leaders in the aviation, defense, and high technology industries. FTG Circuits has operations in Toronto, Ontario, Chatsworth, California and a joint venture in Tianjin, China.

FTG Aerospace manufactures illuminated cockpit panels, keyboards and sub-assemblies for original equipment manufacturers of aerospace and defense equipment. FTG Aerospace has operations in Toronto, Ontario, Chatsworth, California and Tianjin, China.

Share

Print


Suggested Items

Dissecting the IPC Regional Survey on PCB Technology Trends

07/15/2019 | I-Connect007 Editorial Team
Sharon Starr, Denny Fritz, and Mike Carano talk about the global 2018 IPC Technology Trends Report released early this year—the size of the survey, how it was conducted, the general findings, and regional differences. They also shared their takeaways and regional insights, and the industry outlook over the next five to 10 years.

Emma Hudson: From Tomboy to Tech Lead

06/21/2019 | Gen3
Interview between Emma Hudson and Gayle Paterson, founder of FLITE (Female Leaders in Tech, Everywhere).

Electrolytic Plating: Filling Vias and Through-holes

05/28/2019 | M. Özkök, S. Lamprecht, A. Özkök, D. Akingbohungbe, and M. Dreiza, Atotech Deutschland Gmbh; and A. Stepinski, Greensource Fabrication
The continuously evolving electronics industry environment is causing the development of various electrolytic copper processes for different applications over the past several decades. This article describes the reasons for development and a roadmap of dimensions for copper-filled through-holes, microvias, and other copper-plated structures on PCBs.



Copyright © 2019 I-Connect007. All rights reserved.