The Quiet Mainstreaming of HDI Manufacturing


Reading time ( words)

Advances in technology continue to push the envelope of what’s possible. And nowhere has the impact of those advances been felt more profoundly than in the evolution of the current class of mobile devices.

Although design engineers have driven this evolution, primarily through addressing market demand for new form factor innovation, the push to meet the associated manufacturing challenges has been responsible for a revolution in PCB manufacturing. Meeting manufacturing constraints related to component miniaturization, power consumption and functionality—and doing it profitably—has caused PCB manufacturers to adopt processing methodologies that had previously only been leveraged by a small segment of the PCB manufacturing market.

Until recently, HDI PCB manufacturing was primarily done by a technologically elite few due the specialized knowledge and tools required and the relative lack of high-volume opportunities. In the meantime, the use of laser via drilling has spread into a much broader scope of PCB suppliers around the globe. What was once considered miniature in scale has become a standard starting point, even for market segments originally hesitant to use HDI, such as the automotive market. However, as with any industry with many newcomers, it is important to look closer at product and process quality indicators.

The HDI PCB market drivers are, of course, the mobile device boom and the new generation of chipsets requiring an ever-shrinking footprint for an ever-expanding fan-out. Smartphones, tablets, IoT, wearables and, to a degree, PCs have demanded continuous miniaturization while increasing application and functionality.

For this to happen, substrate and PCB manufacturers have had to turn high-tech connectivity into high-volume manufacturability by managing thinner materials, smaller via sizes and less room for line/space. While this is nothing new for the top-tier supply chain, those suppliers new to HDI may find it difficult to immediately convert facilities to meet new standards of accuracy, repeatability and quality. Yet it’s these companies who are crucial to expanding the needed supply base for the growing demand of microelectronics.

Getting started with laser drilling

For companies new to HDI manufacturing, laser drilling is one area where experience is sometimes lacking. The first question to answer is how to drill. The three basic methods (Figure 1) are copper direct drilling (CDD), large window drilling (LWD) and conformal mask drilling (CMD).

 HDI_Fig1.jpg

Figure 1: Copper direct drilling offers advantages over alternative laser drilling methods in accuracy and throughput.

Choosing a via drilling method will depend on the level of accuracy required, as well as the scope of investment potential possible for each supplier. In terms of accuracy, CDD is clearly has the advantage as alignment criteria are only limited to the inner layer registration features. Throughput is also higher for CDD, as there are fewer imaging cycles, but this may only become a decisive factor when manufacturers are drilling high layer-count HDI stack-ups. So LWD or CMD technologies may provide sufficient throughput for simpler 1-n-1 or 2-n-2 builds.

Beyond drilling method it’s important to consider the type of laser and drilling system a given range of applications will actually require. Spending money on additional systems when, at a later stage, additional manufacturing opportunities pop up is usually not an option. So manufacturers new to HDI should consider what kind of base materials will make up their customers’ demand. Will this be only FR4-based material with glass-weave reinforcement? Will this be thicker materials, or thinner? What about special materials for specific areas of application, like high-frequency Teflon materials?

CO2 systems are great for penetrating the glass fibers in FR4, but require an additional oxide on the copper in order to ablate. UV systems, on the other hand, penetrate copper easily, but have issues cutting through glass fibers with consistent quality. Of course there are many further variables beyond laser type that increase the array of options when choosing a system, depending on specific needs.

While CO2 based laser systems are traditionally the workhorses of the HVM HDI industry, this may not cover all bases. In a quickly expanding HDI automotive market, where high frequency applications are becoming more common (think radars and sensors), standard FR4 materials may not be enough. Hence, specialized laser systems, including UV-based systems, may be more applicable in certain markets.

A team approach builds success

Sometimes the level of laser/material interaction is complex enough that additional resources are warranted to analyze manufacturing parameters to ensure quality vias and throughput. These resources come at a cost, and their analyses also cost time. Therefore, understanding these complex interactions well beforehand and knowing in advance what to expect from a laser drilling system provides the best opportunity for success. This can be achieved through close cooperation with a drilling system supplier along with a team commitment toward designing stable, sustainable and repeatable processes. As features become smaller and thinner, this combination of supplier knowledge and customer dedication are elemental to maintaining yield and hence profitability.

The expectation that mobile device applications and functionality should not be limited to any given device at any given time means our cars, houses and airplanes will increasingly employ the technologies that make these features possible. Even though space is not a limiting factor for many of these items, the chipsets used may nonetheless require some degree of microvia and small line/space for fan-out into the main PCB. We will see HDI take on an increasingly common role in the design of an ever-expanding spectrum of microelectronics. Ensuring that manufacturing maintains a high-quality, high-yield operation is vital to the future success of any newcomer to HDI manufacturing. Choosing the right tools and partners for these operations are essential for ensuring profitability.

Chris Ryder is the director of product management for high-density interconnect systems at ESI, Inc.

 

Share

Print


Suggested Items

Just Ask John Mitchell: Are IPC’s Positions Dictated by Politics?

09/21/2020 | I-Connect007 Editorial Team
First, we asked you to send in your questions for Happy Holden, Joe Fjelstad, and Eric Camden in our “Just Ask” series. Now, it’s IPC President and CEO John Mitchell’s turn! A regular PCB007 columnist, John focuses on many of the challenges affecting the global electronics industry supply chain. Over the years, he has served as an engineer, manager, and executive at a variety of companies and organizations. We hope you enjoy “Just Ask John.”

Introducing SMTA’s 2020 Additive Electronics TechXchange, Part 2

09/14/2020 | Nolan Johnson, I-Connect007
I-Connect007’s Nolan Johnson spoke with TechXchange organizers, Tara Dunn, President of OmniPCB, and Lenora Clark, Director of Autonomous Driving and Safety at ESI Automotive, about this year’s version of the event. In this second installment, Dunn and Clark discuss the target audience for the Additive TechXchange: What sort of businesses and roles should be in attendance and why?

Introducing SMTA’s 2020 Additive Electronics TechXchange, Part 1

09/10/2020 | Nolan Johnson, I-Connect007
I-Connect007’s Nolan Johnson spoke with the organizers of the Additive Electronics TechXchange—Tara Dunn, president of Omni PCB, and Lenora Clark, director of autonomous driving and safety at ESI Automotive—about this year’s version of the event. Look for follow-up conversations with Dunn and Clark as additional information about the Additive Electronics TechXchange becomes available.



Copyright © 2020 I-Connect007. All rights reserved.