IPC APEX EXPO: Design Through Box-Build Strategy Works for PNC Inc.


Reading time ( words)

Guest Editor Dan Beaulieu talks with PNC's production manager, Bhavesh Sangani, about PNC's "design through box-build" strategy along with their significant capital equipment purchases over the past few years for both PCB fabrication and assembly. Sangani also announced their upcoming Open House in May for their customers and potential customers.

Watch the interview here.

Share




Suggested Items

A Focus on Process Control, Part 1

09/27/2022 | I-Connect007 Editorial Team
Michael Carano is a noted subject matter expert with respect to process control, electroplating and metallization technology, surface finishing, and reliability. So, it was only natural that we sat down to talk about mechanizing an existing facility given today’s fickle environment. Will any of the CHIPS funding trickle down to bare board fabrication? What process can be adjusted on the factory floor? The focus needs to be more than just on manufacturing and getting work out the door, he says, but also process control.

IPC's I-Connect007 Acquisition Update With John Mitchell

08/05/2022 | Nolan Johnson, I-Connect007
Editor Nolan Johnson speaks with I-Connect007 Publisher Barry Matties and IPC President and CEO John Mitchell about IPC's acquisition of the publishing company, and what this means to I-Connect007's readers.

IPC Student Director: Three Things IPC APEX EXPO Taught Me

03/07/2022 | Paige Fiet, TTM Technologies
IPC APEX EXPO 2022 was my first in-person APEX EXPO event, and it surely did not disappoint. The show this year was packed with high quality technical courses, engaging professional development courses and, of course, an admirable show floor exhibition. This year APEX EXPO really resonated with me, and I would like to leave you with three insights I learned while attending.



Copyright © 2022 I-Connect007. All rights reserved.