Shengyi Appoints New North American Senior Director of RF Products


Reading time ( words)

Shengyi Technology Co. has appointed David Barrell to the position of Senior Director of RF Products for North America, Shengyi Technology (Overseas) Company LTD. David has had an extensive career in OEM marketing of controlled dielectrics materials utilized in RF/Microwave and Commercial Electronic Printed Circuitry applications. David has over 25 years of experience in the laminate materials industry holding positions with GIL Technologies as National Sales and Marketing Manager and most recently with Isola as OEM Marketing Manager, RF/Microwave Technology. 
 
We believe taking advantage of Dave's twenty-plus years of experience and specialized knowledge will provide on-time and professional solutions to the Shengyi customer base. In addition to serving North America's customer's, Dave will supply information back to the to Shengyi R&D department guiding Shengyi as a driver for the development of products to serve future market requirements.

Based in Dongguan since 1985, Shengyi Technology Co., Ltd. (formerly known as Guangdong Shengyi Sci. Tech Co., Ltd.), a public company, is joint-ventured by AVA International Ltd. (formerly known as Mica-AVA (Far East) International Limited), Dongguan Electronic Industry General Company and Guangdong Foreign Trade Imp. & Exp. Corporation. Shengyi manufactures FR-4, CEM-1, CEM-3 and Prepreg. Shengyi’s products are mainly used for making single sided, double sided and multilayer printed circuits board, which are widely applied in mobile phone, automotive, telecommunication equipment, computers and higher-level electrical products.

Share




Suggested Items

Engineering RF Dielectric Material to Enable 5G/6G Antenna Devices

04/11/2022 | Chudy Roosevelt Nwachukwu, ITEQ Corporation
Accurate characterization of frequency-dependent inhomogeneous dielectric material properties is key to the optimal design of high performance and cost-effective PCB antennas. These antennas will be required to enable the plethora of devices forecasted for 5G/6G communication. Therefore IT-88GMW, an advanced resin system reinforced with tightly woven thin glass fibers has been formulated to improve the Q-factor of interconnects and passive components fabricated on PCB laminates.

Improved Thermal Interface Materials For Cooling High-Power Electronics

03/31/2022 | Jeff Brandman, Aismalibar North America
Heat has been a significant concern in electronics since the beginning of the electronics age when hot glowing vacuum tubes were first used to receive and transmit data bits. The transistor and integrated circuit effectively solved that basic problem, but increases in integration resulted in increased concentration of heat, exacerbated by relentless increases in operating frequency. While improvements in electronics technology have been able to mitigate many thermal issues at chip level thanks to improved semiconductor designs devised to operate at lower voltages (thus requiring less energy) the thermal management challenge continues to vex electronic product developers.

Institute of Circuit Technology: A Novel Approach to Recycling PCBs

03/10/2022 | Pete Starkey, I-Connect007
A two-year project funded by an Innovate UK SMART Grant aims to reduce the impact of e-waste using naturally derived, biodegradable and nontoxic products. Those attending the webinar for the Institute of Circuit Technology’s annual meeting on March 2 learned more about the project, as well as statutory paperwork obligations of the UK REACH regulations. Following the formal business, ICT Chair Emma Hudson introduced and moderated this technical webinar.



Copyright © 2022 I-Connect007. All rights reserved.