It’s Only Common Sense: OCCAM—the Time Is Now
Marcy's Musings: The Growing Industry
Dan’s Biz Bookshelf: Seeing the HowRTW IPC APEX EXPO: Matrix Supply Partners Talk Advances in PCB Drill, Copper Foil Technologies
June 24, 2016 | Real Time with...IPCEstimated reading time: Less than a minute
I-Connect007 guest editor Dick Crowe speaks with Hans Vandervelde, product manager of carbide tools at Perfect Point, and Shane Stewart, product manager at Advanced Copper Foils—both companies being supply partners of Matrix USA Inc.—about advancements in drill technology and in copper foils.
Vandervelde discusses the advantages of their new Hybrid Single-Flute Drill, such as registration accuracy and breakage resistance without sacrificing the hole quality.
Stewart, meanwhile, talks about their HVLP foils that have an Rz less than 2.5 microns, as well the Almost No Profile (ANP) copper foil, which has an Rz of around 1.3 microns.
Share on:
Suggested Items
Matrix Electronics Reports Successful IPC APEX EXPO 2018 Show
03/14/2018 | Matrix USA Inc.The recent IPC APEX EXPO tradeshow held in San Diego, California, was a resounding success for Matrix Electronics, North America's leading quick turn supplier of PCB products.
RTW IPC APEX EXPO: Matrix Highlights How Dry Film Laminator Addresses Fine Line Challenges
06/14/2016 | Real Time with...IPCFred Long, business development manager at Matrix USA, talks to I-Connect007 guest editor Dan Feinberg about how a new pressure system in the Hakuto Dry Film Laminator provides even heat and pressure along the entire length of the pressing cycle system to address the challenges of circuits with finer lines.
Copyright © 2024 I-Connect007 | IPC Publishing Group Inc. All rights reserved.
Log in