-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
All About Flex: Imaging Methods for Etch Resist, Part 3: LDI
June 28, 2016 | Dave Becker, All Flex Flexible Circuits LLCEstimated reading time: 1 minute
This column is the third and final part on methods for imaging etch resist. Part 1 discussed screen printing and Part 2 discussed traditional photo exposing. The basic process sequence for LDI is similar to photo exposing:
- The flexible substrate is coated with photosensitive resist
- The resist coated substrate is positioned in the LDI exposing unit
- LDI digitally exposes the desired pattern
- The photoresist is developed and the unwanted resist is washed away
- The copper pattern exposed by removed resist is chemically removed (i.e., etched)
- The resist is stripped off; only the copper pattern remains
Unlike photo exposing, LDI does not use a phototool, but directly exposes a digitally saved artwork pattern onto the resist. Photoresist is selectively exposed as the laser beam increments across the substrate in a rastering fashion. The image formation can be likened to the image formation on a CRT screen, which is formed from thousands of horizontal lines across the screen. Like photo exposing, LDI requires a photoresist, but the resist is normally specially formulated for laser printing; LDI resist is much faster-acting than traditional photoresist. Like photo exposing, resist for LDI comes in liquid or dry film options and the resist application methods are identical to those employed when using an artwork phototool. The post-exposing processing of an LDIprocessed flexible circuit is exactly the same as photo exposing.
Editor's Note: This article originally appeared in the June 2016 issue of The PCB Magazine.
Suggested Items
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources: