-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
Getting to Know Your Designer
In this issue, we examine how fabs work with their design customers, educating them on the critical elements of fabrication needed to be successful, as well as the many tradeoffs involved. How well do you really know your customer? What makes for a closer, more synchronized working relationship?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Building Reliability into the PCB, Part 1
July 20, 2016 | Michael Carano, RBP Chemical TechnologyEstimated reading time: 1 minute
Introduction
Sometimes there is confusion among PCB engineers and quality managers as to what constitutes reliability. Some may say that reliability refers to avoiding PTH failures such as corner cracks or interconnect defects. Then there are those who subscribe to a wider range of failure criteria to determine whether or not the final product is reliable for long-term service. Regardless, the term “reliability” can be defined as:
“The probability that a functioning product at time zero will function in the desired service environment for a specified amount of time.”
With respect to printed circuit boards, the biggest concerns involve thermally driven failures. Thermally driven failures result in PTH defects including:
- Innerlayer separation (ICD)
- Foil cracks
- Barrel cracks
- Corner cracks
When a printed wiring board or assembly is under a thermal load (soldering, thermal cycling, etc.) the PTH is stressed in the z-axis direction. This stress is caused (due to the thermal excursion) by the difference in CTE (coefficient of thermal expansion) of the resin system (used for the printed board) and the PTH. The resin is prevented from expanding in the x/y planes by glass reinforcement of resin material. Due to this restraining in the x-y directions, resin is not restrained sufficiently in the z-axis direction, unfortunately. The result of this is that the resin expansion will occur at a much greater rate in the z-axis direction. The plated through-hole barrel is clearly stressed under these conditions. As this is occurring, the plated copper-to-inner layer connections experience severe tension. If the tension is severe enough, the copper-to-innerlayer connection can separate leading to ICD (interconnect defect). In addition, if the copper-to-innerlayer connection is sufficiently robust and does not separate, much of the stress and strain will be redistributed through the barrel of the PTH, leading to barrel cracking.
To read this entire column, which appeared in the July 2016 issue of The PCB Magazine, click here.
Suggested Items
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources:
Matrix to Exhibit at IPC APEX EXPO 2024 in Anaheim, CA
03/05/2024 | MatrixMatrix will be exhibiting at IPC APEX EXPO 2024, to be held on April 9-12, 2024, at the Anaheim Convention Center, Anaheim, CA.
The Chemical Connection: Getting to Know Your Vendor
02/16/2024 | Don Ball -- Column: The Chemical ConnectionAfter working for a capital equipment supplier for almost 50 years, I’ve found that the most important part of getting to know your vendor is good communication among all parties. While contact between fabricators of a constantly changing product line and the designers of those products may occur daily or weekly, conversations between you and your equipment supplier may be years apart. That lengthy gap often means that previous contacts may have been promoted, retired, or moved on to other opportunities. You may have also migrated to a new supplier with whom you have little or no history. In either case, you will be interacting with someone you are unfamiliar with (as they are with you). Therefore, it is essential for both sides to communicate clearly so expectations will align.
EIPC Winter Conference 2024, Day 2: A Closer Look at Global Trends
02/14/2024 | Pete Starkey, I-Connect007The opening session of the second day’s conference proceedings focused on global PCB trends and was introduced and moderated by Dr. Michele Stampanoni, vice president of strategic sales and business development at Cicor Group in Switzerland. He opened the session with Dr. Hayao Nakahara’s knowledgeable and enlightening video presentation on the IC substrates industry.