Printed Circuits, Inc. Hires Ed Andrews as Director of Quality Systems


Reading time ( words)

Rigid-flex circuit board manufacturer Printed Circuits Inc. has hired Ed Andrews as their director of quality systems. As an ASQ Certified Manager of Quality/Organizational Excellence and Lean/Six Sigma Green Belt Certified, Ed is ideally qualified to take PCi’s quality management systems to the next level.

Printed Circuits Inc. President and CEO Ken Tannehill said, "The circuit board manufacturing process, particularly rigid flex manufacturing, is comprised of 40 some highly interdependent processes. It takes a very unique individual who can grasp the interdependence, putting quality systems, SPC and checks in at each stage of manufacturing in order to improve our overall quality results and delivery performance. I am very excited to say we have found that individual in Ed. He will continue to be active in the Minnesota chapter of ASQ, as well as increasing PCi’s participation in IPC standards and conferences. Ed will bring a new level of oversight and development to our quality systems in order to continually improve our performance for our valued customers.”

About Printed Circuits Inc. (PCi)

Printed Circuits Inc. is a U.S. manufacturer of multilayer flex and rigid-flex printed circuit boards with over 38 years of experience building circuits typically used in high-reliability applications such as medical, military and commercial electronics where customers place a premium on reliability, package density, and weight. For more information on Printed Circuit, Inc.’s services please call or e-mail Bob Burns at (952) 886-9307 or Bburns@PrintedCircuits.com. To visit them on the web, click here.

Share

Print


Suggested Items

The Institute of Circuit Technology Autumn Seminar

10/03/2019 | Pete Starkey, I-Connect007
Meriden has been established as a popular Midlands venue for Institute of Circuit Technology (ICT) meetings. On September 19, a multitude of Fellows, Members, and Associates gathered for the Institute’s autumn seminar, which was organised and hosted by ICT Technical Director Bill Wilkie. The agenda included five informative technical presentations, describing current research and development on significant topics relevant to the industry.

How to Feed Test Data Back to Engineering for Process Improvement

08/01/2019 | Todd Kolmodin, Gardien Services
Some people think of the PCB manufacturing process as a black box: design data goes to the manufacturer (fabrication house), and magically, the finished PCB is produced. While it may have been like that in the past, in actuality, fabricating PCBs today is quite a ballet of processes.

A Guide to High-reliability PCBs from Design to Specification

07/24/2019 | Jeff Beauchamp, NCAB Group
Creating reliable PCBs is an outcome of considering all aspects that can affect reliability as early as possible in the design process. The further down the design process, the more expensive and risky it can be to fix. As they say, everything starts with the design. Because a good board design improves the reliability of the end product and lessens the risk of failure.



Copyright © 2019 I-Connect007. All rights reserved.