Real Time with... IPC APEX EXPO: Fire Up the Inkjets
Technical Editor Pete Starkey sits down with Don Monn of Taiyo America to discuss the benefits of inkjet solder mask and how it helps streamline the manufacturing process. They also discuss the recent acquisition of Circuit Automation, a manufacturer of solder mask coating and vertical drying equipment. If you didn't make it to IPC APEX EXPO, don't worry. We're bringing you coverage of the week's events in San Diego, from ribbon cutting to teardown.
Real Time with... IPC APEX EXPO: PCB Manufacturing Today
Dick Crowe speaks with Kurt Palmer, president of Burkle North America, about the trends he sees in PCB manufacturing today. From LDI to laser drills, they discuss a wide range of concerns and opportunities. If you didn't make it to IPC APEX EXPO, don't worry. We're bringing you coverage of the week's events, from ribbon cutting to teardown.
Real Time with... IPC APEX EXPO: Taiyo Focuses on Collaboration
Don Monn, Midwest regional sales director at Taiyo America, reviews the progressive adoption of inkjet solder mask technology while acknowledging that liquid photoimageable mask continues as the mainstream process, with new developments in double-sided coating and vertical drying equipment. He comments on how Taiyo’s collaborative relationships with suppliers and customers have enabled logistics to be successfully managed through difficult times.
Real Time with... IPC APEX EXPO: Burkle Has a Sharper Image
Kurt Palmer, president of Burkle North America, speaks with Editor Nolan Johnson about the latest advancements in imaging and the equipment that Burkle will be demonstrating at IPC APEX EXPO in San Diego.
If you can’t make it to IPC APEX EXPO, don’t worry. We’ll be bringing you interviews with the engineers, managers and technologists who are making a difference in our industry.
2020 EIPC Winter Conference, Day 1
Pete Starkey recaps how the 2020 EIPC Winter Conference, held in mid-February, attracted around 90 delegates from a dozen European countries—as well as a few from North America—to an outstanding learning and networking experience for members of the PCB community. The theme of this year's event was: “The Needs for Next-Generation Electronic Devices and Changes in Fabrication Solutions for PCBs, PCBAs, Materials, and Technologies.”
IPC APEX EXPO 2020 Attendees Speak: Brian Wojtkiewicz
"It seems they are all pursuing digital imaging; whether it’s direct imaging exposure or inkjet solder mask, they’re all going that direction, and it’s not just the big customers; small customers are doing the same," said Taiyo's Brian Wojtkiewicz. "They’re investing money, which is good. New investment is what has been lacking for a couple of years."
Burkle North America: New Equipment and ‘New Blood’ in the Industry
During the show, Guest Editor Dick Crowe and Kurt Palmer, president and CEO of Burkle North America, discuss Kurt's career history and responsibilities in his present role. Palmer also details the equipment that the company is exhibiting on the show floor, and the palpable excitement that veteran technologists feel this year seeing younger engineers and students attending IPC APEX EXPO 2020. There’s a lot of “new blood” in the industry, as Palmer explains.
Kurt Palmer Takes on New Role as Burkle America President
During productronica 2019, Barry Matties chatted with Kurt Palmer about his new role as president of Burkle America, the work they do with Schmoll Maschinen, and why customers in North America must continue to invest to keep up with the technology and be profitable.
Solder Mask Tack Dry
As a general rule, the tack-dry temperature should be as low as possible; in other words, it should only be as high as necessary. If the temperature is too low, the evaporation rate for the solvent will be to slow, and the solder mask will not dry in a reasonable amount of time. If the temperature is too high, however, the dry time certainly will be excellent, but it could create a solder mask lock-in with repercussions by the developing time.
Communication, Part 2: Design Data Packages
The first part of this six-part series highlighted ways that PCB fabricators and designers can better communicate, starting with how to qualify a board shop. In Part 2, Bob Chandler and Mark Thompson talk about the importance of preparing, sending, and receiving comprehensive (and ideally, perfectly complete) design data packages.
Meet Dana Korf, I-Connect007 Columnist
Meet Dana Korf, one of our newest I-Connect007 columnists! Dana’s columns will focus on IPC-2581 as well as PCB front-end tooling, data quality, DFM processes, etc.
Additive Electronics Conference Set for October 2019
Tara Dunn, president of Omni PCB and I-Connect007 columnist, and Lenora Clark, director of autonomous driving and safety technology at MacDermid Alpha Automotive, discuss what can be expected from the upcoming Additive Electronics Conference in San Jose, California, the impetus and motivation behind the conference, and who can benefit the most from attending.
Robert Feranec: A Lifetime of PCB Design
Robert Feranec, a popular YouTuber and founder of the FEDEVEL Academy, discusses with Andy Shaughnessy the upcoming keynote he’ll be giving at AltiumLive in San Diego, California, and how he's helping people around the world understand and optimize their PCB design processes.
A Conversation with Karen McConnell—An Emerging Engineer Program Mentor
IPC’s Emerging Engineer program, launched in 2016, provides early career professionals an opportunity to learn from dedicated industry volunteers who participate in IPC standards development. IPC’s editorial staff had the opportunity to talk with one of those dedicated volunteers, mentor Karen McConnell, Senior Staff Engineer CAD CAM, Northrop Grumman, about why she participates as a mentor in IPC’s Emerging Engineer program.
Emma Hudson: From Tomboy to Tech Lead
In this interview, Emma Hudson, CTO of Gen3, and Gayle Paterson, founder of Female Leaders in Tech, Everywhere (FLITE), discuss careers and the electronics industry.
IPC’s PCB Tech Trends Study Highlights Issues Impacting Fabricators
The 2018 survey results indicated the need for speed and low loss as critical functions of the materials chosen. This is the digital age, and with the Internet of Things, virtual and augmented reality, vehicle-to-vehicle communication, etc., the need for low-loss and ultra-low-loss materials continues to grow as a percentage of circuit boards fabricated.
IMPACT Washington, D.C. 2019 Recap: Leaders Call for Action on USMCA Trade Deal
Top executives from electronics companies across the United States were in Washington, D.C., last week to call on the Trump administration and Congress to support policies that will drive the electronics industry’s future growth in North America and worldwide.
Growing Opportunities with 3D Printed Electronics
Dr. Kurt Christenson, senior scientist at Optomec, discusses the company’s Aerosol Jet technology, which eliminates the need for wire bonding by printing interconnects on 3D surfaces. Christenson also explores the current state of the technology and highlights the market segments and applications with the most to benefit from being able 3D print electronic components, such as resistors, capacitors, antennas, and transistors.
New Technical Director and Upcoming 2019 EIPC Summer Conference
Tarja Rapala-Virtanen is the newest technical director for the EIPC. I-Connect007's Nolan Johnson and long-time EIPC conference attendee Pete Starkey discuss her new role, the upcoming summer conference in Leoben, Austria, and the program in place for the June conference.
U.S. Tax Law Boosts Growth, But Uncertainties Loom
Monday, April 15 was the deadline for millions of Americans to file their income tax returns, so this is a good time to review the Tax Cuts and Jobs Act of 2017 (TCJA) as well as the current tax policy landscape and how these rules are affecting the electronics industry.
Chemical Recycling as Part of a Zero-effluent Strategy
Green manufacturing methodologies for PCBs are becoming a global shift. Green efforts have been underway in the European Union for quite some time. Likewise, in the United States, new PCB manufacturers are building zero-waste, zero-effluent facilities and gaining certification as such.
Gene Weiner on the IPC APEX EXPO 2019 Automotive Executive Forum
Dan Feinberg spoke with Gene Weiner, president and CEO of Weiner International Associates, about IPC's history of forums, his thoughts on the Executive Forum on Advancing Automotive Electronics at IPC APEX EXPO 2019, and how the IPC Hall of Famers and the industry can help improve forum success.
NCAB Group on Supply Chain Issues
Wayne Antal, a key account manager with NCAB Group, discusses supply chain issues, the effect he sees on PCB fabrication channels, and how his customers are adapting to the new business dynamics. This is part one of a two-part conversation with Antal.
RTW IPC APEX EXPO 2019: LPKF on Benefits of Laser Depaneling
Laser technology marches on, and marching along with it is LPKF's new line of laser depaneling equipment. Stephan Schmidt, president, talks with I-Connect007 Guest Editor Kelly Dack about the many benefits of using lasers including cleanliness and higher yields through increased array density.
Can E-waste and Metals Recovery Efforts Lower Environmental Risks and Liability?
Gold, palladium, silver, and other precious metals (PMs) in manufacturing wastes represent high value, but how PMs are recovered can pose environmental and liability issues. Aerospace and electronics manufacturers and suppliers, in particular, produce volumes of manufacturing wastes that contain varying levels of PMs.
Book Review: The Greatest Salesman in the World
If you haven’t read this classic yet, it’s high time that you did; it’s an oldie but a goodie. Obviously, from the title, you can guess that it is a bit dated (please excuse the term “salesman”). Good, I’m glad we got that out of the way.
RTW IPC APEX EXPO 2019: LPKF Highlights Laser Processing Tech, Glass Drilling Capabilities
Guest Editor Joe Fjelstad sits down with Stephan H. Schmidt, LPKF president, who provides an overview of the company's laser processing machine and their capabilities, and highlights the new glass drilling capabilities.
RTW IPC APEX EXPO 2019: New IPC Technical Education Program Manager
Brook Sandy-Smith discusses her new role as IPC technical education program manager, which is also a brand-new IPC position. She further explains the benefits of membership, when a member should contact her, the IPC STEM Outreach Program, and upcoming events.
RTW IPC APEX EXPO 2019: Taiyo Discusses New Solder Masks and Photoimageables
Donald Monn, Midwest regional sales manager for Taiyo America, turns the tables on I-Connect007 Technical Editor Pete Starkey and quizzes him about his knowledge of Taiyo's new crack-resistant white solder mask for automotive, and the company's standard photoimageables re-formulated for laser direct imaging (LDI) that avoid the need for UL requalification.
CES 2019: More Show Floor Favorites
In my final piece covering CES 2019, I will review more automotive technology, updates on 3D printing, and some trending devices such as smartwatches and new computer components for those that either need or just want to have extremely powerful and impressive-looking computers.
RTW IPC APEX EXPO 2019: Updates on Taiyo’s Inkjet Solder Mask
Donald Monn, regional sales manager at Taiyo America, speaks with I-Connect007 Technical Editor Pete Starkey about the latest updates in their inkjet solder masks, and the many installations around the world that they are seeing for their product.
AltiumLive Munich: Day 2 Keynotes
Having enjoyed the conference dinner and robot battles of the previous evening, a good night’s sleep, and a hearty breakfast, Altium’s family of over 220 electronics engineers and designers eagerly returned to the conference room. Many jostled to secure the best seats for the second day of the European AltiumLive design summit in Munich, keen to make the most of the “learn, connect, and get inspired” opportunity it offered.
Laser Focus on Flex and Rigid-flex
ESI’s Chris Ryder, director of Product Management, and Shane Noel, Flex Systems product manager, discuss laser vias for flex users and the increasing necessity for companies to collaborate early on and become more and more involved, whether that be in the product design, or with the process or base material manufacturers.
CES 2019 Showstoppers, the Show Floor, and Some Neat Stuff
CES 2019 is over, and those of us who spent four to five days trying to see and hear as much as possible are in recovery mode. There were over 182,000 attendees, and 6,600 of us were media all trying to get to as much of the 2.9-million-square-feet exhibit space as possible.
Atotech at HKPCA on Announcements and Advancements
Edy Yu, managing editor for PCB007 China, caught up with Daniel Schmidt, Atotech’s director of global marketing, during the 2018 HKPCA and IPC Show in December. Edy and Daniel discussed Atotech’s new announcements at the show including their new solutions for 5G, high-speed, and high-frequency applications, and more.
Catching up With Artnet Pro
I recently caught up with my old friend Meir Polack, co-owner with Rony Hod of Artnet Pro, which is a high-tech equipment sales and service company with offices in the U.S., China, and South America. We discussed a new line of direct imaging equipment called Altix (also the name of the company).
ESI’s Chris Ryder: There’s More to Choosing a Laser Than You Think
At the recent HKPCA show, I sat down with ESI’s Chris Ryder, director of product management—HDI—to discuss considerations for choosing a new laser system, and how ESI uses its decades of flex and rigid-flex drilling experience to help guide customers in their decision-making process.
CES Press Day: NVIDIA, Samsung, and Intel
Three major companies—NVIDIA, Samsung, and Intel—had lengthy, interesting presentations on CES press day, and each had with their own agenda.
Agfa on Revolutionary Inkjet Solder Mask Applications
Does inkjet solder mask have the potential for volume production? Mariana Van Dam, global sales manager for PCB imaging solutions, and Dr. Frank Louwet, business unit manager for advanced coatings and chemicals, discuss Agfa's latest developments, plus some novel applications for inkjet etch and plating resists.
Better to Light a Candle: Chapter 1—Prepping the Next Generation
There has been a considerable amount of (electronic) ink and words shared in our industry bemoaning the graying-out of our industry and the growing shortage of skilled people at all levels. (See the May 2017 PCB007 Magazine column “Help Wanted—and How!” for just one example). As is usually the case, though, when all is said and done, more has been said than done.
Robert Art on the Importance of Thermal Management
Robert Art, global account manager for IMS materials at Ventec International Group, discusses future market requirements for thermal management materials, the need for a better understanding of the concept of thermal impedance, and an initiative to propose a consistent industry-standard method for measuring thermal conductivity while at electronica 2018.
Chris Nuttall Discusses NCAB Group's IPO and Future Plans
Editor Nolan Johnson sat down with Chris Nuttall, COO and VP of technology at NCAB Group, to discuss software tools, predictive reports, and the company's recent IPO.
The Shape of Things to Come: Curved, Flexible, Stretchable, and Three-Dimensional Electronics
The seamless integration of electronics into flexible, curved, and even stretchable surfaces is being requested for several markets, such as automotive (dashboards, lighting, sensors), smart buildings (lighting facades, air quality, solar panels), medical (health patches, X-ray, analysis), and smart clothing (position tracking, sports).