Lost your password?
Not a member?
Resend confirmation instructions
Sort By Category
- New Technology
- Printed Electronics
- New Products
- Test & Inspection
- Fabrication Process
- IPC Standards
- From The Show
- PCB Fabricator
8 Measures for Sales and Operations Planning in Turbulent Times, Part 7
08/11/2020 | Fane Friberg, CEPHAS
8 Measures for Sales and Operations Planning in Turbulent Times, Part 6
08/10/2020 | Fane Friberg, CEPHAS
I-Connect007 Editor's Choice: 5 Must-Reads for the Week
08/07/2020 | Nolan Johnson, I-Connect007
8 Measures for Sales and Operations Planning in Turbulent Times, Part 5
08/05/2020 | Fane Friberg, CEPHAS
8 Measures for Sales and Operations Planning in Turbulent Times, Part 4
08/04/2020 | Fane Friberg, CEPHAS
PCB :: New Products
Chris Hanson: New Ventec IMS Dielectrics Rated for Higher Temps
Andy Shaughnessy recently spoke with Chris Hanson, global head of IMS Technology for Ventec International Group. During their conversation, Chris discusses his group’s recent efforts to create new IMS materials, with a focus on dielectrics. As Chris explains, Ventec has developed several new dielectrics that can withstand much higher operating temperatures, one of which is UL-rated for a maximum operating temp of 155°C, which may be the highest for an IMS dielectric.
InduBond Gets Hot With Induction Heating Lamination
In this video interview from the show, Editor Nolan Johnson sat down to speak with Víctor Lázaro, InduBond’s R&D director and technical manager, about InduBond's latest technology for panel lamination utilizing induction heating. InduBond demonstrates a lamination oven on the IPC APEX EXPO show floor, as well as the advantages of the technology.
I-Connect007 Research: Readers Share Advice on COVID-19
In our survey this week, we asked readers what advice they might have for friends and colleagues in the electronics industry regarding the COVID-19 outbreak. Because this survey question was open-ended, some respondents shared more than one piece of advice; therefore, astute readers may notice that the graph totals more than 100%.
DOX Electronics Discusses New DoD Cybersecurity Requirements
In this video interview from the show, Managing Editor Nolan Johnson speaks with two DOX Electronics technologists, founder and VP Ken Michael and senior account executive Larry Cohen, about the new government cybersecurity requirements necessary to deliver DoD contracts. Ken and Larry also share their upcoming presentation on business security measures, both digital and physical. If you’re bidding on DoD contracts, you won’t want to miss this video.
Are Trade Shows at a Crossroads?
With the cancellation of this year’s E3 show, the biggest gamer conference, the event’s format is shifting to a more fluid, online communication method. This may be the wave of the future. Can you imagine if the COVID-19 outbreak had occurred just three months earlier? Would there have been a Consumer Electronics Show, DesignCon, or IPC APEX EXPO? If the coronavirus is still in play in six months, will these shows take place in 2021?
2020 EIPC Winter Conference, Day 2
Rested and refreshed, delegates returned to the conference room for the second day of the 2020 EIPC Winter Conference in Blijdorp, Rotterdam, South Holland. Pete Starkey provides an overview of the presentations and activities from Day 2.
NCAB: A ‘Hub’ That Works With Designers From Start to Finish
In this video interview from the show, Guest Editor Kelly Dack meets with Ruben Contreras, field applications engineer at NCAB Group, and Shaun Salas, key account manager. They discuss a variety of ways to overcome challenges with tariffs and broker relationships, as well as emphasizing upstream expertise and how the company operates as a "hub." Part of NCAB’s objective is to work with designers and design engineers to make the board more manufacturable.
Catching up With Midstate Electronics
Dan Beaulieu recently sat down with Susan Matteo, Joan Allen, and Gerri Wooten from Midstate Electronics’ sales team to discuss their company, how long they have been in business, the key ingredients to their longevity and success, and how they see the market today in general. Midstate offers everything from multilayer PCBs to flex and rigid-flex circuits and PCB assembly.
David Bergman: CFX a Key Ingredient of Smart Factories
In this video interview from the show, Jennie Hwang and David Bergman, IPC's VP of standards and training, address the use of CFX to facilitate plug-and-play smart factories. IPC APEX EXPO 2020 offered a variety of demonstrations of CFX, IPC’s Connected Factory Exchange.
CB Tech and Technica Tout Titan’s Traits
During the show, Technical Editor Pete Starkey met with Frank Medina, president and CEO of Technica USA, and Harry Kok, international sales director at CB Tech. They discuss the features of the CB Tech Titan direct imaging system, which has very high throughput capability with best-in-class registration consistently maintained from the beginning to the end of the batch. Kok also explains how the Titan fits in with CB Tech’s ongoing plans for Industry 4.0.
Meet Sharon Cohen, I-Connect007 Columnist
Meet Sharon Cohen, one of our newest I-Connect007 columnists! Sharon’s columns will share Orbotech’s expert knowledge on how to maximize the value of manufacturing systems. Mr. Sharon Cohen is the president of Orbotech West, where he is responsible for the PCB division’s organization in North America and EMEA (Europe, Middle East, and Africa).
RTW IPC APEX EXPO: John Mitchell Discusses the Show's Evolution
During IPC APEX EXPO, Technology Editor Dan Feinberg spoke with John Mitchell, CEO and president of IPC, about the event’s evolution from a strictly PCB show into a miniature Consumer Electronics Show, including new ideas and prototypes. They also discussed several new IPC initiatives, including IPC Design.
AT&S: Working With Designers on a Global Level
Barry Matties recently took a tour of AT&S’s Austrian factory, which is developing new circuit design strategies surrounding embedded and active components. Gerald Weis discusses the company’s focus on serving and educating PCB designers around the world, as well as their plans to embrace the latest technology and Industry 4.0 processes going forward.
IPC APEX EXPO Technical Session Preview
Brook Sandy-Smith, IPC technical conference program manager, previews the technical side of IPC APEX EXPO 2020, which includes the customary technical sessions, but also some new wrinkles like the fundamentals program and “sessions @ the intersection” to encourage more interaction.
Visit the Newcomers’ Lounge at IPC APEX EXPO
The Newcomers’ Lounge will open on February 2, will remain open through February 6, and is conveniently located near the technical conference and meetings area, where it will serve as a dedicated resource center for newcomers to get their questions answered and meet other newcomers. Use the lounge to take a break from the hustle and bustle of a busy day, catch up on emails, or grab a quick snack or refreshment.
CES: Sands Show Floor and ShowStoppers
Every year at CES, ShowStoppers and a similar event, Pepcom, demonstrate many new devices and technologies. Again, some will become devices we can’t live without, and some you will never hear about again. Seeing all of these new ideas is one of the highlights of attending CES. Enjoy this look at a potpourri of new, innovative high-tech products.
How to Become a Certified IPC Trainer
The Blackfox Certified IPC Trainer (CIT) programs are best suited for experienced and skilled electronics technicians, engineers, and supervisors who have the will and passion to teach and train colleagues about the quality standards of IPC. They also provide successful candidates with a credential that confirms their knowledge and understanding of IPC quality systems.
Wi-Fi 6: Wired vs. Wireless
We all know that it makes no sense to get the latest device just because they come out with a new one every year. Sure, post-millennials tend to want a new phone every year, but most of us are well past that. However, as the competitive nature of the consumer tech industry continues to increase, the rate of change is also accelerating, as is the peer pressure to upgrade. Non-techies get new phones every year, techies get new CPU and GPUs every two years, average consumers get bigger and higher-res TVs every three years, and on it goes.
CIMS Galaxy: More Than an Inspection System
Editor Pete Starkey and Vladi discuss the newest CIMS AOI platform, Galaxy, which is more compact and more versatile than the previous Phoenix model. The Galaxy is scalable and can be equipped with more functions and connected to a variety of Industry 4.0 databases. Vladi explains that the Galaxy can be used for everything from inner layer inspection to final inspection, detecting defects down to 1 pixel. The system is available with multiple metrology options as well.
The Viability of a Cyanide-free Immersion Gold Bath
The Tianjin chemical blast in August 2015 sensitized the Chinese authorities to the use of cyanide in production. As a consequence, the authorities have introduced licensing with regard to the use of cyanide. In turn, this has motivated Chinese PCB manufacturers to ask suppliers for a competent cyanide-free immersion gold solution (CNF Au).
A Walking Tour of Viking Test With Jake Kelly
In this video walking tour of the Viking Test booth at productronica 2019, Managing Director Jake Kelly walks us down the line of Viking's universal film stripper.
Multilayer Press Technology Using Magnetism to Produce Lamination Heat
A revolutionary concept in multilayer press technology has been developed that uses electromagnetic energy to heat the existing stainless-steel separator plates with a never-before dreamed-of accuracy and precision. The heating and cooling systems—embedded within a robust hydraulic press inside a vacuum chamber design—are controlled using a temperature feedback loop that guarantees perfect fidelity between the press recipe and the press result.
Creating Smart Surfaces with Electronic Functionality
Of all of the technical user presentations I attended at the AltiumLive design summit in Munich, the one I found most fascinating introduced an innovative technology that encouraged a bit of lateral thinking and appealed to my creative side: the IMSE, or injection-moulded structural electronics.
Patty's Perspective: From Start to Finish
Our goal in this month's issue of Flex007 Magazine is to provide insights into how best to accomplish the seemingly daunting task of designing flexible and rigid-flex circuits—and with a new and different design each time. A lot of it boils down to one factor: working with your supplier and customer.
RTW IPC APEX EXPO 2019: MacDermid Alpha on Affinity for ENIG
John Swanson, director of final finishes for MacDermid Alpha Electronics Solutions, speaks with I-Connect007 Guest Editor Kelly Dack about the ENIG finish process and their new product Affinity, which smooths out the challenges of the process.
RTW IPC APEX EXPO 2019: Taiyo Discusses New Solder Masks and Photoimageables
Donald Monn, Midwest regional sales manager for Taiyo America, turns the tables on I-Connect007 Technical Editor Pete Starkey and quizzes him about his knowledge of Taiyo's new crack-resistant white solder mask for automotive, and the company's standard photoimageables re-formulated for laser direct imaging (LDI) that avoid the need for UL requalification.
Upcoming 2019 Trade Show Season in the USA
A look back at Dan Feinberg's predictions made a year ago, and a preview of what we might see at CES 2019 along with some new projections. CES—the first, largest, and most influential and predictive of global electronics trends of this group of trade shows.
CES 2017: Disruptive Technologies
Those of you that have read my previous columns covering CES 2017 know that at recent CES shows I have seen many drones, autonomous cars, IoT devices, robots, and many other items ranging from robots who stand in for your doctor to smart trash cans who tell you via Alexa, Google, or soon, Cortana on your own computer, that since you have thrown away two empty milk cartons in the last few days it may be time to order more milk; just say yes and consider it ordered.
DownStream Technologies: Building the Interface Between Designers and Fabricators
DownStream Technologies founder Rick Almeida speaks with Editor Pete Starkey about building the interface between the PCB designers and fabricators. He gives details on their design software and where most of the design community resides.
RTW IPC APEX EXPO: Microcraft Discusses Eliminating Process Steps and Minimizing Set-Up Times
Zachary Cliff, outside sales account manager at MicroCraft, speaks with I-Connect007 guest editor Steve Williams about how their inkjet printers are helping customers minimize setups, eliminate process steps, and thereby save a lot of time and labor fees.
CES 2016 Wrap-Up, Part 2: The Road Less Traveled
There was plenty to see on the show floor at CES 2016. But we found an entirely new universe of products to learn about and explore. We found such a dimension in the semi-private suites located on the upper floors of the Venetian, the Westgate, Mandalay Bay and other hotels. I'll spend a day in these suites next year!
CES 2016 Wrap-Up, Part 1
CES 2016 is now history and most of us are home, or at our next port-of-call. I have seen various attendance numbers but it’s somewhere in the range of 175,000; it was busy, crowded and impossible to see everything. Here is my review of some of the most innovative devices and technologies at CES.
CES 2016: Press Day, Showstoppers and LaunchIt Event
Tuesday, January 5, was press day at CES 2016. Some of the largest press conferences are held on press day. Many of them are one- or two-hour advertisements with a number of new product announcements inserted, and some do provide a great deal of market data and trends. The bigger “pressers,” such as the Samsung event, fill multiple auditorium-sized rooms as well as overflow rooms.
productronica 2015: Schmid's InfinityLine Opens New Era in Etching Machine Technology
Schmid has combined the best attributes of their long-established CombiLine and PremiumLine in the development of their new InfinityLine family of modular etching machines, which offer an attractive cost structure without compromising performance, quality or durability.
ESI’s New Gemstone Changing the Rules for Laser
I-Connect007 Publisher Barry Matties sat down at CPCA 2015 with ESI’s Mike Jennings, who explained the company’s newest addition: Gemstone, an ESI-designed and manufactured laser system, with 10,000 guaranteed hours, which is poised to change the rules in flex and other printed circuit processing. Jennings also discusses ESI’s new relationship with WKK, and an increased presence in China.
Isola Launches Low-loss Laminate for 100 GB Ethernet Apps
I-Connect007 Technical Editor Pete Starkey and Isola’s Fred Hickman, senior director of high-speed digital products, spent time at IPC APEX EXPO 2015 talking about Isola’s recent launch of a low-loss, low-skew laminate prepreg. Hickman explains that the new material, Chronon, will be one of the enablers of 100GB Ethernet applications.
CES 2015: Preview and Predictions
Looking back over the last five years of CES and analyzing predictions and items featured by the large exhibitors, you'd likely assume the 2015 show would feature more advanced 3D TVs, as they were predicted to take over the market...wrong!
Mentor: PCB Technology Leadership Award Winners
Continuing its tradition of promoting and recognizing PCB design excellence, Mentor has announced the winners of its 25th annual PCB Technology Leadership Awards. Started in 1988, this program is the longest running competition of its kind in the EDA industry. It recognizes engineers and designers who use innovative methods and design tools to address today's complex PCB systems design challenges and produce industry-leading products.
thePCBlist: A Global Directory for PCB Manufacturing
Patty Goldman, project manager for thePCBlist, joins Guest Editor Dan Beaulieu to discuss the benefits of this global directory. Work on building thePCBlist started two years ago and the project went live just nine months later. The directory now features detailed information for 1,900 PCB manufacturers. OEMs, designers, EMS providers, and more use the list to find the perfect manufacturer to fit their needs.
Looking Forward to Day 2
This is the fifth in a series of articles about APEX, held January 22-24, 2002 in San Diego. It provides a guide to the activities of the second day of the show.
Looking Forward to Day 1
This is the third in a series of articles about APEX, held January 22-24, 2002 in San Diego. It provides a guide to activities taking place during the first day of the show.
Press Release Tips
Copyright © 2020 I-Connect007. All rights reserved.