Latest Articles

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

This week, I’m identifying key news about EVs, orbital payloads, environmental sustainability, the state of the economy, and new executive leadership. I’d say it’s a well-rounded selection of what’s happening in the industry. I can’t help but continue to be impressed by the pervasiveness of space commercialization. Satellites have a long history of being commissioned and operated by private business, but as commercial launch vehicles become more available, it seems that satellite launches are accelerating. Read on!

Catching a Cool Vibe in Del Mar

The Del Mar Electronics & Manufacturing Show in late April attracted a strong crowd, and for good reason. This show, which started in 1995 and attracts approximately 400 exhibitors, takes a refreshing approach: It’s at the local fairgrounds, so the vibe is cool, relaxed and easier on the pocketbook. Attendance hasn’t yet reached the highest pre-COVID levels, but show organizer Doug Bodenstab said registrations improved over last year.

The Secret to Successful Onboarding

John Izzo is a celebrated author, activist, and public speaker who advises companies worldwide on corporate sustainability, social responsibility, leading on purpose, and employee engagement. In this interview with Barry Matties, John offers some suggestions for a better onboarding process, and he answers some of the tough questions that companies are facing regarding employee retention.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

In this week’s must-reads, we have coverage of NAMM 2023 and SMTA Atlanta, plus some tips for traditional PCB designers who are entering the RF design space, where designers have to master ideas like antenna tuning. We also have some news about March PCB sales, as well as a great conversation with Ventec’s Frank Lorentz, who explains how to set up an onboarding process that converts new hires into happy, long-term employees.

Chemical Legislation and Restrictions on Solder Masks

Ever since liquid photoimageable solder masks (LPISMs) were introduced, their UV exposure speed has been a key factor in their performance. The LPISM is coated onto the PCB, dried, and then selectively exposed with UV light via a phototool, or more recently, via direct imaging using LED or lasers. The exposed areas polymerise and become insoluble in the developing solution. The polymerisation is initiated by one or more chemicals called photoinitiators, which are components of the LPISM.

Successful Onboarding Takes Training, Technique, and Trust

Many companies in our industry are trying to hire new career-minded, long-term employees, but the hiring process is costly, especially if you hire someone who doesn’t work out. How do you ensure that your new hire stays on and becomes a happy, long-time employee? We recently spoke with Ventec’s Frank Lorentz about his company’s onboarding processes. Frank is the general manager of Ventec’s customer and technical service, warehouse, and quick-turn facility in Germany, and he’s made a career out of logistics. He walks us through his exhaustive onboarding process, which includes letting new hires make mistakes so that they can learn from them.

A Complex and Contradictory Economic Outlook

At this year’s EMS Summit held at IPC APEX EXPO, I shared IPC’s economic outlook for 2023 and 2024. The electronics industry overcame significant hurdles and headwinds in 2022, thanks in large part to strong underlying demand. While many of those hurdles and headwinds have subsided, the industry faces new challenges in the year ahead. At the EMS Summit, I shared three key themes defining the year ahead.

NAMM 2023: It’s All About That Bass

The use of AI in the music industry seems only natural. For example, if you’re trying to create a specific sound, rhythm, mix of instruments, or volume level, you’d typically be in front of a series of mixers and controls, making tweaks and adjustments. If you’re trying to create a piece of music that is similar to one you already have, AI can do that for you. Just give it some basic instructions and let it go to work.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

SpaceX is back in the news and in a big, powerful, let’s-blow-up-a-rocket-because-we-can kind of way. The company had scheduled a test launch on Monday, April 17 for the SpaceX Starship, only to scrub that launch until this past Thursday. Well, the results from the launch were less than desirable—or were they? While Starship ultimately exploded just prior to stage separation, simply clearing the launchpad was considered a major milestone by SpaceX.

Developing Advanced Substrates for Die Packaging and Test

Semiconductor wafer-testing interface PCBs require a fine-pitch interposer/substrate to transfer a larger pitch (greater than 0.4 mm) to a fine pitch (less than 150 mm). The interposer, which serves as the electromechanical interface between the tester and the wafer requires fine pitch, high pin count, high I/O density, and vertical compliance.


Plug into the Ecosystem and Network

Barry Matties met Wade Pinder during the Cup of Joey event at the Ion in Houston, Texas. Wade is a successful product manager and Houston-area college lecturer who likes to tell young students and industry stalwarts alike to reach out and learn from each other. He shares his thoughts on finding and hiring the right talent.

Spring Issue of IPC Community Now Available for Download

Welcome to the Spring issue of IPC Community! This quarterly publication was created with you in mind! In this issue, you’ll find articles, interviews, columns, graphics, surveys, IPC member benefits, and so much more. Each issue is designed to celebrate the success between IPC and its members and how this relationship benefits the entire electronics manufacturing industry.

IPC Honors Committee Volunteers

This year, IPC introduced two awards as a way to show appreciation for its standards development volunteers and leaders. The Hillman-Lambert Award for Volunteer of the Year was awarded to Michael Ford of Aegis Software and Christina Rutherford of Honeywell Aerospace. The Goldman-Kessler Award for Committee Leader of the Year went to Bob Cooke of NASA’s Johnson Space Center.

Survey: Business Goals and Benchmarking

We want your input! PCB fabricators have been utilizing benchmarks for decades, comparing metrics for everything from manufacturing best practices to competitors’ products and services. Now, we have access to more manufacturing data than ever before, and companies can conduct benchmarking at a granular level.

CMK Hits the Gas on Automotive PCBs

Guest Editor Kelly Dack recently spoke with Mike Meyer, senior business development manager for CMK Americas, which specializes in manufacturing PCBs for the automotive sector. In this interview, they discuss CMK’s latest developments, trends in the global automotive market, and why they plan to expand their facility in Thailand.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

How was your week? We’ve been pretty busy ourselves, bringing you coverage of the SMTA Expo & Tech Forum in Boise, Idaho. Tabletops shows like this offer a great value during the spring, in between the bigger shows like IPC APEX EXPO and SMTA International. In fact, SMTA schedules approximately 30 regional shows around the United States and abroad.

SMTA Boise: More Than Potatoes in Idaho

At Tuesday’s SMTA Boise Expo, Barry Matties visited with SMTA Boise Chapter President Tony Whitt, who talked about the genesis of this regional show, and what he’s learned about selling in today’s digital world. Two big companies in the Boise area support the region’s electronics manufacturing industry, and these companies are having the same struggle as so many others—where are the people who actually want to work?

A Goal of Higher Technology

Like many circuit board shops, Sunstone found itself climbing out of the deep well created by shutdowns during the pandemic. But 2022 was a good year, and Vice President Matt Stevenson greets 2023 with optimism. What’s on his mind? He’s looking closely at automation, price adjustments, a plating line, and the ongoing struggles with staffing.

Steven Bowles: Taking a Stand

Steven Bowles, an associate fellow at Lockheed Martin Space, talks about his journey as a leader in IPC, beginning with the unexpected opportunity that launched his leadership career across a range of professional committees. True progress, Steven says, requires input from a diverse set of perspectives alongside the passion that drives our industry forward.

I-Connect007 Editor’s Choice: Top Five Must-Reads for the Week

The adage about spring weather in Northern temperate climates is, “April showers bring May flowers.” This is, of course, on the heels of March, when the weather comes “In like a lion, out like a lamb.” The suggestion for March is that whatever way the month starts, it will end just the opposite. But we’re in the first week of April, where things are expected to settle into a steady state of preparation for an abundance just over the horizon. Sound a bit like our business climate right now, doesn’t it?


PCBAA Reacts to Implications of Biden’s PCB Determination

Hot on the heels of the news that U.S. President Biden signed a presidential determination in support of the printed circuit board industry, I-Connect007’s Nolan Johnson spoke with David Schild, executive director of the Printed Circuit Board Association of America, about some of the expected implications. David points out, among other things, that this signals increased momentum with government and defense to support U.S.-based printed circuit manufacturing, and the possibility that a renewed interest in the industry by private financing could possibly follow.

Invested in Growth

The I-Connect007 team paid a visit to American Standard Circuits in West Chicago, Illinois. While there, we talked at length with CEO Anaya Vardya about the issues on his mind as he pushes technology, expands his floor space, and considers the implications of the CHIPS Act, staffing issues, and what’s happening in China.

Deciphering the Presidential Determination

On March 27, 2023, U.S. President Biden issued a presidential determination that, IPC states, “prioritizes the domestic development of printed circuit boards (PCBs) and advanced packaging, including IC substrates, under Title III of the Defense Production Act (DPA). IPC welcomes this action, but what does this really mean? IPC vice president of global government relations, Chris Mitchell, joins Nolan Johnson to clarify what a presidential determination is, what it means to both the industry and individual companies.

Stanton Rak: Patient Leaders Nurture Growth

Stanton Rak, principal at SF Rak Company, discusses his new IPC President's Award. He says a successful leader must demonstrate passion for what they do, and that working in an IPC leadership role requires a unique approach to collaboration. IPC’s diverse membership means leaders must cultivate patience and be open to relying on the expertise of their fellow professionals.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

Texans like to say that everything is bigger in Texas. That certainly seems to be the case for the SMTA Dallas Expo & Tech Forum. Publisher Barry Matties and I attended SMTA Dallas on Tuesday, and the tabletop show has now grown to 100 exhibitors, up from 92 vendors last year. It’s become more than a local or regional show, with some exhibitors flying in from Silicon Valley and the East Coast.
Copyright © 2024 I-Connect007 | IPC Publishing Group Inc. All rights reserved. Log in