Latest Articles

IPS Expanding to Accommodate Growing Market

I recently had the opportunity to visit IPS in their Cedar City, Utah, facility, where Mike Brask, founder and president of IPS, shared his business strategy and gave me a tour of the expanding manufacturing facility. IPS produces a wide range of PCB manufacturing equipment, including plating, DES, VCM, VRPs, ventilation, and spare parts for older equipment.

PC Technological Advances in 2020

With CES quickly approaching, which is perhaps the largest technology event globally that is also going virtual this year, key component and sub-assembly companies are not waiting to announce their next generation of components. Dan Feinberg details new components and performance advances, as well as why you should consider building your own PC.

I-Connect007 Editor's Choice: Five Must-Reads for the Week

In my top five picks, we have news about columnist Tara Dunn moving to Averatek to work with their A-SAP additive processes, and an interview with Audrey Sim regarding the “hybrid” model adopted by the HKPCA for its upcoming Electronic Circuits World Convention. We also have a compilation of the questions that readers have asked Joe Fjelstad and news about DownStream Technologies adding support for flex, rigid-flex, and embedded component designs. Finally, we share a review of some of KYZEN’s new training sessions on cleaning electronic assemblies—virtual courses that pack a lot of information into 15-minute snapshots. Knowing how tight everyone’s schedules are now, 15-minute events might be the ticket.

Just Ask Joe Fjelstad: The Exclusive Compilation

We asked for you to send in your questions for Joe Fjelstad, and you took us up on it! We know you all enjoyed reading these questions and answers, so we’ve compiled all of them into one article for easy reference. We hope you enjoy having another bite at the apple. And if you’d like to hear more from Joe, view his column series “Flexible Thinking.”

Tara Dunn Transitions to New Role at Averatek

I-Connect007 columnist Tara Dunn shares the exciting news about the transition from her role as president of Omni PCB to vice president of marketing and development at Averatek, where she will be working primarily with OEMs to break down the advantages of additive manufacturing.

HKPCA’s Audrey Sim Details Upcoming Electronic Circuits World Convention

Nolan Johnson speaks with Audrey Sim, executive director and vice president of operations for the Hong Kong Printed Circuit Association, about the upcoming Electronic Circuits World Convention, to be held November 30 through December 2, 2020. Ms. Sim gives Nolan an overview of the conference’s history, its scope as a printed circuit industry conference, and its shift to a hybrid virtual/physical format for 2020.

This Month in PCB007 Magazine: The Copper Foil Market Is Anything But Flat

Nolan Johnson interviewed Mike Coll, COO of Denkai America, about the copper foil and substrate market, the recent acquisition of the company by Nippon, and what they’re doing to respond to very small feature sizes.

I-Connect007 Editor's Choice: Five Must-Reads for the Week

My last turn to select the top five editor’s picks was just before the triple-threat Halloween holiday (full moon, blue moon, and on a Saturday). Now that it’s my turn again, it falls the mega-superstitious Friday the 13th. You’re not triskaidekaphobic, are you?

Manufacturers Weigh in on Made-in-America Debate

As the U.S. grapples with who will take the helm of the U.S. presidency, electronics manufacturers around the country are grappling with which policies and ideas would promote growth and innovation in the sector. Many agree that a push for “made in America” policies and incentives might be useful. Often, they point to similar initiatives used by other countries, including China and India.

Just Ask Tara Dunn: Why Don’t Fabricators Provide More Feedback to Designers?

First, we asked you to send in your questions for Happy Holden, Joe Fjelstad, John Mitchell, and others in our “Just Ask” series. Now, it’s Tara Dunn’s turn! Tara is the vice president of marketing and business development for Averatek. A regular Flex007 columnist, Tara discusses flexible circuits, rigid-flex, and rigid PCBs, as well as RF/microwave technology, microelectronics, and additive processes. She is also co-founder of Geek-a-Palooza and a show manager for the SMTA Additive Electronics TechXchange event. She has over 20 years of experience in the PCB industry. We hope you enjoy “Just Ask Tara.”

Roundtable Discussion: App Notes and Fab Notes

Andy Shaughnessy recently invited four recent contributors—Dana Korf, Jen Kolar, Mark Thompson, and Kelly Dack—to review the June and August 2020 issues of Design007 Magazine, which covered app notes and fab notes, respectively. In this wide-ranging roundtable, the group discusses some of the ongoing challenges related to incomplete and inaccurate design data and why communication can preclude many of these problems. What follows is the transcript from this conversation.

I-Connect007 Editor's Choice: Five Must-Reads for the Week

This past week, we published a variety of articles, interviews, and columns—and readers definitely made their favorites known. There was good news about hiring and staffing. (In case you were wondering, there are quite a few open positions in this industry right now.) We touched base with a pair of young engineers to get their thoughts on what it’s like for recent grads working in the PCB manufacturing community. We learned about a company’s new program that can help take some of the stress out of NPI. We also launched a new chapter in our “Just Ask” series, this time starring columnist Tara Dunn. And there was sad news that a contract manufacturer’s chairman had just passed away.

Just Ask Tara Dunn: What’s Next for LCP Materials?

First, we asked you to send in your questions for Happy Holden, Joe Fjelstad, John Mitchell, and others in our “Just Ask” series. Now, it’s Omni PCB President Tara Dunn’s turn! A regular Flex007 columnist, Tara discusses flexible circuits, rigid-flex, and rigid PCBs, as well as RF/microwave technology, microelectronics, and additive processes. Tara is the co-founder of Geek-a-Palooza and a show manager for the SMTA Additive Electronics TechXchange event. She has over 20 years of experience in the PCB industry. We hope you enjoy “Just Ask Tara.”

Survey Results: ‘Are You Currently Hiring?’

The I-Connect007 research team invited readers to share their thoughts on what's happening with staffing and retention to help prepare for an upcoming issue on this important topic. Here, we delve into the first question, "Are you currently hiring?"

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Real Time with… AltiumLive 2020: Vince Mazur Previews New Design Rule Features

Altium Technical Marketing Manager Vince Mazur discusses his presentation at the recent AltiumLive, which focused on updates to Altium Designer's approach to creating design rules and constraints. Vince explains that these features will be more intuitive for the user, and the update, which is currently in beta, will be released in the future. The company is shifting from “rule-centric” design rules features to capabilities that are more “design-centric,” with applicable rules for each object available at one click.

PCB Technologies Focuses on an All-in-One Solution

Recently, PCB Technologies reached out to us with news about their new All-In-One offering. Intrigued, we followed up and spoke with VP of Marketing and Business Development Arik Einhorn to get more details on the All-In-One services. We’ve included the short article and the interview here.

I-Connect007 Editor's Choice: Five Must-Reads for the Week

Welcome to the Halloween issue of the I-Connect007 Top Five Editor’s Picks! This year’s Halloween lands on a doozy of a day. Astronomers among us will, undoubtedly, already have noticed that not only does the spooky holiday fall on a Saturday night, but it also falls exactly on a full moon—and a Blue Moon, at that! The last time a Halloween Blue Moon occurred in all time zones was in 1941. As if there weren’t enough “ghoulishness” already, 2020 delivers yet another rare occurrence.

Reducing Flux Splatter in Sensors and Camera Modules

With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.

Real Time with… Altium Live Europe 2020: Rick Hartley’s Secrets of PCB Optimization

As Lawrence Romine said in his introduction, “There’s that moment when you sit in the crowd and hear Mr. Rick Hartley speak that you know you’ve arrived in PCB design.” With 50 years in the industry focused on circuit and PCB design—and as a specialist in EMI, noise, and signal integrity issues—Rick Hartley was invited to talk about PCB optimization. Pete Starkey provides an overview of the presentation.

Gardien on the Right Track With New ERP System

Andy Shaughnessy speaks with Roland Valentini, Gardien Group COO, about the company’s new OnTrack2 ERP and process management software. He explains how OnTrack2 is purpose-built for customers around the world and why it’s much more than a replacement for OnTrack1, which was being stretched beyond its original intent.

IPC Standards Development: Business Challenges and an Inside View

With increasing frequency, standardising the standards, such as ISO 9201, imposes certain rules that must be met to ensure “fair play” amongst the supply chain. There will be those familiar with hearing about “false positives/negatives” and “never trust the salesman,” so mitigating these is no easy task. However, there is the chance for each 5-30 Task Group to review industry requirements and set out the work program for the ensuing period. With that in mind, much of what follows is based on comments we learn about from our industry around the world, many of whom are not yet IPC members. Yes, this is a membership recruitment drive, unashamedly, as well as a search for volunteers willing to help create the standards of tomorrow.

How to Benefit From Robotic Soldering Processes

Webinars are in vogue! But in Pete Starkey's experience, the master of the technical webinar with many years’ experience of delivering first-rate events is Bob Willis—electronics assembly specialist, soldering expert, and provider of training and consultancy in electronics manufacture. Here, Pete recaps Bob’s presentation on the upcoming robotic soldering experience.

Additive Electronics TechXchange: NSWC Crane and Lockheed Martin Presentations

The Additive Electronics TechXchange this year was a virtual event. Happy Holden covers two presentations, including “Very High-Density Investigation Project” by Steve Vetter of the NSWC Crane Naval Facility and "Electronics Additive Manufacturing for Defense and Space" by Kourtney Wright, Ph.D., of Lockheed Martin Advanced Technology Center.

Flex on the Brain: The Future of Neural Interfaces

The SMTA Additive Electronics TechXchange took place virtually on October 14, with presentations from a wide variety of technologists involved in additive processes. Andy Shaughnessy describes how one of the highlights was a presentation titled “Flexible Electronics for Neural Interfaces” by Dr. Jonathan Viventi, assistant professor of biomedical engineering at Duke University.
Subscribe | Magazines | RealTime with | JobConnect007 | Education | Webinars
Copyright © 2024 I-Connect007 | IPC Publishing Group Inc. All rights reserved. Log in