Lost your password?
Not a member?
Resend confirmation instructions
Sort By Category
- New Technology
- Printed Electronics
- New Products
- Test & Inspection
- Fabrication Process
- IPC Standards
- From The Show
- PCB Fabricator
- Market Impact Content
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
08/12/2022 | Andy Shaughnessy, I-Connect007
Today’s M&A: Right on Target
08/09/2022 | Nolan Johnson, I-Connect007
Challenges of the 2022 PCB Market: The Party’s Over
08/08/2022 | Pete Starkey, I-Connect007
IPC's I-Connect007 Acquisition Update With John Mitchell
08/05/2022 | Nolan Johnson, I-Connect007
Q4 Concerns: Hold on to Your Hats
08/03/2022 | Shawn DuBravac, IPC
PCB :: Fabrication Process
There’s An Art to Plating
There's definitely an art to plating. Start with a generally planar substrate, then alternately put stuff on and take things off. Continue this in subtle variations until what you have is the stuff you want, where you want.
Development of Flexible Hybrid Electronics
This article will present a hybrid manufacturing process to manufacture FHE systems with a two-layer interconnect structure utilizing screen printing of silver conductive ink, filled microvias to connect ink traces at the different layers, and use of the traditional reflow process to attach the semiconductor chips to the printed substrates.
The Impact of Inductance on Impedance of Decoupling Capacitors
This article discusses the impact of interconnection inductance on the impedance of the decoupling capacitor, which influences the power integrity of the PCB. The investigation is performed with 3DEM simulation by varying the trace length and height of stitching vias that connect the decoupling capacitor across the power rail and ground.
Altium Designer 19.0 Features Printed Electronics Design Functions
The newest version of Altium Designer—revision 19.0—includes functionality for designing printed electronic circuits. We wanted to get the scoop on Altium’s PEC tools, so we asked Nikolay Ponomarenko, Altium’s director of product management, to give us a tour of the new functions.
IPC High-reliability Forum and Microvia Summit Review, Part II
The Microvia Summit on May 16 was a special feature of the 2019 event in Baltimore, since microvia challenges and reliability issues have become of great concern to the PCB manufacturing industry. It provided updates on the work of members of the IPC V-TSL-MVIA Weak Interface Microvia Failures Technology Solutions Subcommittee and opportunities to learn about latest developments in methods to reveal and explain the presence of latent defects, identify causes and cures, and be able to consistently and confidently supply reliable products.
How to Feed Test Data Back to Engineering for Process Improvement
Some people think of the PCB manufacturing process as a black box: design data goes to the manufacturer (fabrication house), and magically, the finished PCB is produced. While it may have been like that in the past, in actuality, fabricating PCBs today is quite a ballet of processes.
Avoiding CAF Failures at the IPC High-reliability Forum
Foresite CEO Terry Munson recently spoke with Andy Shaughnessy during the IPC High-Reliability Forum and Microvia Summit in Baltimore about his presentation on the causes of conductive anodic filament (CAF), the dangers of resin starvation, and what advice he'd give to PCB designers to avoid those types of failures.
A Guide to High-reliability PCBs from Design to Specification
Creating reliable PCBs is an outcome of considering all aspects that can affect reliability as early as possible in the design process. The further down the design process, the more expensive and risky it can be to fix. As they say, everything starts with the design. Because a good board design improves the reliability of the end product and lessens the risk of failure.
How Changing Cleaning Technologies Affect Reliability
At the recent IPC High-Reliability Forum and Microvia Summit, Andy Shaughnessy spoke with Michael Konrad, founder and president of Aqueous Technologies and a speaker and panelist at the event in Baltimore, Maryland. They discussed Konrad’s presentation and the recent proliferation of cleaning, from solely high-reliability products to Class 1 consumer products.
Microvias: Links of Faith are Not Created Equally
Microvias connect adjacent copper layers to complete electrical paths. There are copper-filled microvias, which can be stacked to form connections beyond adjacent copper layers, and staggered microvias, which stitch adjacent copper layers with paths that meander on the layers between the microvias. This article discusses the various laser-drilled microvias and presents SEM photographs to begin the search for the root cause of weak copper interface.
Reliability... It All Comes Down to the Landing
Our industry is embarking on a new age of technical development to achieve much higher levels of overall reliability that will be required of the devices we fabricate. Whether in medical devices, autonomous vehicles, or in IoT, reliability will be crucial to both our success and safety.
Dissecting the IPC Regional Survey on PCB Technology Trends
Sharon Starr, Denny Fritz, and Mike Carano talk about the global 2018 IPC Technology Trends Report released early this year—the size of the survey, how it was conducted, the general findings, and regional differences. They also shared their takeaways and regional insights, and the industry outlook over the next five to 10 years.
Conventional Exposing: Direct Imaging Solder Mask
When you compare direct imaging of solder mask with contact exposure of solder mask, the positive aspects and the advantages are clear. Without a doubt, direct imaging shortens the throughput time and eliminates artwork production. It also eliminates the costly measurement of the panels and manufacturing of artwork with different scaling factors.
Design Is a Pivotal Piece of the Puzzle
As a field applications engineer at TTM Technologies, which has fabrication and manufacturing locations around the world, Julie Ellis sees a wide variety of customer design requirements. In this interview with the I-Connect007 Editorial Team, Julie explains how PCB designers can influence the development of the PCB. She shares a variety of tips and tricks that designers can implement early in the design process to help optimize fabrication and assembly later on and keep small issues from becoming big problems downstream.
Kelvin Characterization to Accurately Predict Copper Thickness
A few years ago at Integrated Test Corporation, we found that the reaction plan for void fallout at electrical test was ineffective and not standardized. Like many PCB manufacturing facilities (including a Sanmina shop that I used to work at), the reaction plan consisted of cross section analysis to determine the void type.
Technically Appropriate Material Choices Are Key to Success
Materials are no longer a passive part of the design; they play an active role in the manufacturability, reliability, and speed of a PCB. Editor Nolan Johnson and Mike Creeden, founder of San Diego PCB Design, discuss several key characteristics that designers should consider in their material selection process.
Insulectro’s OEM Program: Time to ACT!
Ken Parent, Insulectro VP of sales and product management, discusses the current dynamics in the materials marketplace and how Insulectro is developing educational resources to help design teams and fabricators better understand the capabilities and features for the emerging laminate materials.
Digital Twin Drives Design in the Smart Factory
New product realization and design for manufacturing and assembly has now started to become more visible as a program that can improve a company’s time to market and lower product costs. This is one of the main focuses of Industry 4.0 for the smart factory. Many programs are underway by numerous companies, and what is now needed is a framework to coordinate the application of these programs.
Photonics Systems Looks to Expand Its PCB Capabilities
Pulsed-laser equipment manufacturer Photonics Systems looks to expand its capabilities to the PCB industry. Barry Matties sat down with Antonio Schmidt and Kurt Weber to talk about the company’s transition and the challenges they’ve faced thus far as they continue to build and extend their brand into a new market segment.
Quality by Design
The design team’s files and the accompanying documentation is the real-world implementation plan to turn the OEM’s concepts and marketing research into a viable, physical, competitive product. Unless manufacturing defies the build instructions from the designers, the product will only be as manufacturable as the design files themselves.
ICT 45th Annual Symposium Review
The Institute of Circuit Technology (ICT) held its 45th annual symposium on June 4, 2019 in Dudley at the Black Country Museum—a symbol of the spirit of innovation in engineering technology and the entrepreneurial and manufacturing skills that had established that region’s supremacy in leading the original Industrial Revolution. Here's a recap of the events and presentations at the symposium.
IPC’s PCB Tech Trends Study Highlights Issues Impacting Fabricators
The 2018 survey results indicated the need for speed and low loss as critical functions of the materials chosen. This is the digital age, and with the Internet of Things, virtual and augmented reality, vehicle-to-vehicle communication, etc., the need for low-loss and ultra-low-loss materials continues to grow as a percentage of circuit boards fabricated.
Creating Stability in Materials Chaos
Nolan Johnson and Tony Senese—manager, business development group, Panasonic EMBD—discuss the evolution of the materials marketplace over the years from a time when the market aligned for the rise of Panasonic’s MEGTRON 6 to the ever-changing materials industry of today. With the ramp-up to 5G and everyone pushing product development, Tony describes a chaotic materials market flooded with new companies and materials.
PCB Fabricators’ Tech Capabilities Exceed OEMs’ Needs in Many Areas
Some interesting differences showed up in the board property data reported by the OEMs and PCB fabricators that participated in IPC’s PCB Technology Trends 2018 study.
The GraftWorx Fluid Management Patch Story
The GraftWorx vision is to connect patients to clinicians with clinical data that will have a meaningful impact on their care. Its first application is to monitor patients with end-stage renal disease or kidney failure using a wearable device called the SmartPatch that records numerous clinical cardiovascular metrics. This article details how GraftWorx was designed, fabricated, and assembled.
Orbotech Celebrates Success of Orbotech Diamond and Discusses Future Trends
At the recent CPCA Show in Shanghai, Orbotech celebrated having over 100 of their Orbotech Diamond™ direct imaging machines in the marketplace. Barry Matties caught up with Meny Gantz—VP of marketing for Orbotech’s PCB division—to talk about the drivers behind the success of Orbotech Diamond systems before turning the conversation toward the future and Industry 4.0.
Collaboratively Creating Wearable Medical Products
Patty Goldman, Barry Matties, and Happy Holden recently spoke with David Moody and Rich Clemente of Lenthor Engineering along with Anthony Flattery and Amit Rushi—their customers at GraftWorx. They discussed a recent project and how they worked together to solve a difficult problem by designing a rigidized flex circuit for their product.
Electrolytic Plating: Filling Vias and Through-holes
The continuously evolving electronics industry environment is causing the development of various electrolytic copper processes for different applications over the past several decades. This article describes the reasons for development and a roadmap of dimensions for copper-filled through-holes, microvias, and other copper-plated structures on PCBs.
Are Regional Differences in PCB Technology as Great as We Think?
We keep hearing that Asia is all consumer and automotive electronics and North America and Europe are all high reliability/long life. The findings in IPC’s PCB Technology Trends 2018 study show that these regions are not as different as expected, and the differences we do see are interesting.
XNC Format: Gerber Takes Data Into the Future
The problem is that so many NC files are of deplorable quality because the NC format was never designed as a data transfer format. It has always been a machine driver and contains all sorts of information that a drilling machine needs, but that is irrelevant and confusing for data exchange.
Technically Appropriate Material Choices are Key to Design Success
Materials are no longer a passive part of the design; they play an active role in the manufacturability, reliability, and speed of a PCB. I-Connect007’s Nolan Johnson and Mike Creeden, founder of San Diego PCB Design, discuss several key characteristics that designers should consider in their material selection process.
Learning to Be More Flexible: Case Studies on Improving FPC Design
As miniaturization requirements force manufacturers to pack more functionality into ever-smaller packages, it becomes more difficult to conform to IPC construction recommendations. Achieving robust FPCs requires frequent, iterative interaction internally among the mechanical, electrical, and PCB design teams, as well as with the fabricators and assemblers. The sooner in the design cycle you can engage the supplier and assembler, the better.
Vertical Conductive Structures, Part 1: Rethinking Sequential Lamination
Sequential lamination, as it is used today in high density interconnect (HDI) and derivative technologies, is constrained by the fact that one cannot plate a blind hole deeper than the diameter of the hole. A larger hole allows processes to plate deeper. In fact, this manufacturing constraint has made it a challenge even to reliably plate and process blind holes up to a 1:1 aspect ratio.
Averatek on the Future of Additive and Semi-additive Processing
Averatek’s President and COO Mike Vinson talks with Barry Matties about the benefits semi-additive and additive processing can bring to the shop floor as well as some of the current challenges and limitations that continue to leave many manufacturers hesitant to implement the technology.
Alun Morgan on Thermal Management and LEDs in Automotive
Guest Editor Judy Warner met with Alun Morgan, technology ambassador for Ventec International Group, to discuss topics addressed at the Automotive Executive Forum that took place at IPC APEX EXPO 2019. Morgan describes his presentation and findings centered around thermal management in automotive, specifically LEDs, as well as the unique set of growing thermal management challenges Tier 1 suppliers are now facing in the automotive sector.
Stacked Microvia Reliability: Ongoing Work and Upcoming IPC Conference
One year ago, Happy Holden's review of the 2018 IPC High-Reliability Forum reported the presentation of J.R. Strickland and Jerry Magera, who described research at MSI Applied Technology into overcoming the risk of stacked microvia failures escaping standard quality assurance procedures. Their report provided a basis for the IPC white paper IPC-WP-023, which addressed reliability issues associated with stacked microvias and included data collected from several other printed circuit manufacturers.
Preparing to Enter the Workforce With PCB Design Experience
Nolan Johnson recently spoke with Alex Burt, a computer engineering student at George Fox University, at a well-attended college career fair on the GFU campus in Newberg, Oregon. In the interview, Alex discusses his PCB classwork, challenges of design, and how it has impacted his internship experience as he prepares to enter the workforce upon graduation in the spring semester of 2019.
Advance Your Company Through Automation
At the recent IPC APEX EXPO 2019, Yash Sutariya discusses with Patty Goldman the labor shortage he has experienced in the Detroit area, the impact automation can have in the manufacturing process, and other strategies to advance your company.
Sunstone's Terry Heilman Discusses the Evolving Industry
For the last 14 years, CEO Terry Heilman has been one of the key leaders in driving the expansive growth at Mulino, Oregon-based Sunstone Circuits, growing from a traditional PCB manufacturer to a PCB solutions provider with online ordering and a free PCB design tool. At IPC APEX EXPO 2019, Terry discusses the importance of serving the customer, how customers are shaping companies today, and the impact this will have on companies in the future.
RTW IPC APEX EXPO 2019: MivaTek Discusses Flatbed LED Direct Imaging Systems
Brendan F. Hogan, managing director for MivaTek Global, and Chris Hrusovsky, VP of business development, give Pete Starkey their outlook on the market for flatbed LED direct imaging systems, report spectacular sales success, and describe their new introductions for large-format, dual-tray and microelectronics systems.
Ventec Focuses on High-mix Manufacturing
The I-Connect007 team recently toured Ventec International Group’s Suzhou factory where a modern, flexible manufacturing concept designed for fast delivery is enhancing their established volume manufacturing of specialty, high-reliability epoxy laminates and prepregs. Read on to know more about Ventec's ongoing investment in the facility to offer flexible world-class high-mix manufacturing capabilities for polyimide, thermal management, low-loss, and signal integrity material solutions.
Staying Current on Flex Manufacturing is Smart Business
Brendan Hogan, managing director of smart electronics manufacturer MivaTek Global, discusses how to better design for flex, and ways designers can stay current on manufacturing technology that can impact their flex boards.
EIPC Winter Conference, Day 2
After the papers from the first day of the EIPC Winter Conference in Milan on February 14–15, the delegates were hosted at a reception and plant tour of Elga Europe at their nearby production facility. Here's a recap of the events and highlights of the Day 2 of the conference.
SimplifyDA: Time for a New Autorouter Paradigm?
At DesignCon, I spoke with SimplifyDA CEO Zen Liao and Director of Sales and Marketing Dale Hanzelka. SimplifyDA is putting a new twist on the old autorouter by utilizing topological technology. I asked them to discuss their approach to autorouting, and how they plan to entice more PCB designers to use routers. Is it time for a paradigm shift in autorouting?
Meyer Burger on Inkjet Technology and Digital Printing Benefits
Don Veri, sales and business development manager for Meyer Berger, discusses some of the challenges fabricators face in adopting inkjet technology, the benefits they can expect once it’s deployed in their facility, and the advantages of digital printing in solving problems on the shop floor.
3DEM Modeling: Influence of Metal Plating on PCB Channel Loss and Impedance
This article briefly introduces different types of metal plating commonly used in PCB fabrication. Subsequently, the influence of metal plating on PCB channel loss (i.e., insertion loss or S21) and impedance (i.e., time domain reflectometry or TDR) is studied with 3DEM modeling,
EIPC Winter Conference, Day 1
EIPC Chairman Alun Morgan writes about the highlights of and the technical discussions at the recent EIPC Winter Conference held in Milan last February 14–15.
The Smart Factory IQ Test
Let's see how prepared you are to talk about Industry 4.0. The following 12-question test will measure how much you know about smart factory concepts and philosophies. Since the concept of a smart factory is larger than the electronics manufacturing industry and encompasses the entire supply chain, the terms and concepts here are also more global in nature.
RTW IPC APEX EXPO 2019: Ucamco Discusses Latest Evolution of PCB Software
Ucamco Managing Director Karel Tavernier speaks with Dan Feinberg about their aim of automating the CAM process as much as possible. He also discusses the recent evolution of their PCB software.
RTW IPC APEX EXPO 2019: Limata Unveils Exciting Developments in LDI
Lino Sousa, sales, Limata, explains to Pete Starkey the latest developments in Limata’s laser direct imaging technology, which eliminates the need to change the solder mask.
Selective Solder Mask Deposition by Inkjet
At IPC APEX EXPO 2019, Pete Starkey spoke with Joost Valeton, product manager for PiXDRO inkjet printing equipment with Meyer Burger, about their newly configured inkjet printer for PCB applications, and bringing awareness to opportunities using selective solder mask deposition.
Thinking and Designing in Three Dimensions
This article aims to encourage interconnect designers who design for flex or rigid-flex circuits to use the modern CAD tools at their disposal for getting flex done right the first time. While modeling PCBs in 3D is not new, and all the major PCB EDA vendors offer some form of 3D modeling and integration, it is still a rare circumstance that flexible circuit designers use 3D CAD modeling.
Can E-waste and Metals Recovery Efforts Lower Environmental Risks and Liability?
Gold, palladium, silver, and other precious metals (PMs) in manufacturing wastes represent high value, but how PMs are recovered can pose environmental and liability issues. Aerospace and electronics manufacturers and suppliers, in particular, produce volumes of manufacturing wastes that contain varying levels of PMs.
RTW IPC APEX EXPO 2019: CBT and Technica’s Relationship, Roadmap, and Equipment
Pete Starkey speaks with David J. Clark, CBT project director, and Najib Khan, photoimaging product manager at Technica, who explain the background of their companies and their current working relationship. Further, they address their technology roadmap, and the unique features of their direct imaging equipment—particularly the registration accuracy that can be achieved.
Tara Dunn Shares Strategies for Today’s PCB Business
At the recent AltiumLive event, Barry Matties met with PCB sales expert Tara Dunn of Omni PCB to discuss selling strategies for selling PCBs in the North American market. The conversation also covers strategies for staying competitive through a generational shift in the ownership of PCB shops, and the importance of supply chain communication and building relationships.
RTW IPC APEX EXPO 2019: Meyer Burger Highlights Inkjet Solder Mask Printing Equipment
Annegret Lewak, head of sales at Meyer Burger, speaks with Steve Williams about their latest inkjet solder mask printing equipment, which offers advanced accuracy and resolution imaging.
RTW IPC APEX EXPO 2019: Uyemura Discusses Heavy Gold Deposition
Richard DePoto, business development manager at Uyemura, brings Pete Starkey up to speed with the success of the heavy gold deposition process they discussed last year. It has been seamlessly integrated into standard ENEPIG lines to give a choice of finishes, and how advances in electroless palladium have enabled the elimination of electroless nickel for high-speed signal integrity.
RTW IPC APEX EXPO 2019: A Conversation with Burkle’s David Howard and Kurt Palmer
Burkle North America's David Howard has chosen to take a well-earned retirement, and introduces Pete Starkey to his worthy successor Kurt Palmer.
RTW IPC APEX EXPO 2019: Updates on Taiyo’s Inkjet Solder Mask
Donald Monn, regional sales manager at Taiyo America, speaks with I-Connect007 Technical Editor Pete Starkey about the latest updates in their inkjet solder masks, and the many installations around the world that they are seeing for their product.
Laser Focus on Flex and Rigid-flex
ESI’s Chris Ryder, director of Product Management, and Shane Noel, Flex Systems product manager, discuss laser vias for flex users and the increasing necessity for companies to collaborate early on and become more and more involved, whether that be in the product design, or with the process or base material manufacturers.
AltiumLive Munich: Day 1 Keynotes
The weather forecast was wrong! Despite my apprehension and winter clothes, there was very little snow at the Hilton Munich Airport. It could have been any season of the year inside the splendid convention facility, which was also the venue for the second European AltiumLive design summit. AltiumLive brought together a family of over 220 electronics engineers and designers eager to learn from top industry experts and applications specialists who were equally eager to share their knowledge and experience freely.
Happy Anniversary, Gerber Format: Looking Ahead to Digital Innovation
This year, we celebrate the 55th anniversary of the introduction of the Gerber machine language format. We can thank H. Joseph Gerber, the man who took manual PCB design to the next level with the automated photoplotter, for giving us this format in 1964. Gerber immigrated to the United States in 1940 with his mother following the death of his father during the Holocaust. Gerber started Gerber Scientific Instrument Company in 1948 to commercialize his first patented invention—the variable scale.
Atotech at HKPCA on Announcements and Advancements
Edy Yu, managing editor for PCB007 China, caught up with Daniel Schmidt, Atotech’s director of global marketing, during the 2018 HKPCA and IPC Show in December. Edy and Daniel discussed Atotech’s new announcements at the show including their new solutions for 5G, high-speed, and high-frequency applications, and more.
Catching up With Artnet Pro
I recently caught up with my old friend Meir Polack, co-owner with Rony Hod of Artnet Pro, which is a high-tech equipment sales and service company with offices in the U.S., China, and South America. We discussed a new line of direct imaging equipment called Altix (also the name of the company).
The Quest for Perfect Design Data Packages
There’s an ongoing problem in the PCB industry: fabrication shops are receiving incomplete or inadequate design data packages, leaving manufacturers scrambling to fill in the blanks. For a quick-turn prototype shop like Washington-based Prototron, with over 5,000 customers and up to 60% of orders coming from new customers each month, that can add up to a lot of wasted time and effort just in the quoting stage. Dave Ryder, Prototron president, and Mark Thompson, engineering support, delve into this continuing issue and more.
Mentor and Seica Partner for Data Prep and Testing Big Boards
Mark Laing, business development manager of the Valor division at Mentor, a Siemens company, and Luca Corli, director of sales at Seica, speaks with I-Connect007 Technical Editor Pete Starkey about the partnership between their two companies, which enables efficient data preparation for testing big boards, and accelerates new product introduction (NPI) cycles.
ESI’s Chris Ryder: There’s More to Choosing a Laser Than You Think
At the recent HKPCA show, I sat down with ESI’s Chris Ryder, director of product management—HDI—to discuss considerations for choosing a new laser system, and how ESI uses its decades of flex and rigid-flex drilling experience to help guide customers in their decision-making process.
Agfa on Revolutionary Inkjet Solder Mask Applications
Does inkjet solder mask have the potential for volume production? Mariana Van Dam, global sales manager for PCB imaging solutions, and Dr. Frank Louwet, business unit manager for advanced coatings and chemicals, discuss Agfa's latest developments, plus some novel applications for inkjet etch and plating resists.
Better to Light a Candle: Chapter 1—Prepping the Next Generation
There has been a considerable amount of (electronic) ink and words shared in our industry bemoaning the graying-out of our industry and the growing shortage of skilled people at all levels. (See the May 2017 PCB007 Magazine column “Help Wanted—and How!” for just one example). As is usually the case, though, when all is said and done, more has been said than done.
Robert Art on the Importance of Thermal Management
Robert Art, global account manager for IMS materials at Ventec International Group, discusses future market requirements for thermal management materials, the need for a better understanding of the concept of thermal impedance, and an initiative to propose a consistent industry-standard method for measuring thermal conductivity while at electronica 2018.
Institute of Circuit Technology Harrogate Christmas Seminar 2018
The Institute of Circuit Technology returned to the fading Victorian splendour of the palatial and stately Majestic Hotel in the North Yorkshire town of Harrogate for its 2018 Christmas seminar, an intense programme of five excellent technical presentations, impeccably organised and moderated by Technical Director Bill Wilkie and generously supported by GSPK Circuits.
Dock Brown on Succeeding at Failure Analysis
Dock Brown of DfR Solutions gave a keynote speech at SMTAI, “Requirements for Both Cleaning and Coating to Building Medical Hardware.” Barry Matties and Happy Holden sat down with Dock to discuss the current trends he sees in failure analysis, the concept of “rules versus tools,” and how predictive engineering software used early in the design cycle can help predict failures in components and microvias and drive cost down.
Top 10 Most-Read PCB007 Articles of 2018
Every year, we like to take a look back at the most popular PCB news and articles. These are the top 10 most-read PCB articles from the past year. Check them out.
Schmoll and Burkle: Lasers and Drills for GreenSource
While at GreenSource Fabrication, Burkle Automation Technology’s Dave Howard introduced me to the Schmoll equipment as well as other items that Burkle installed at the facility. One unit of great interest was the Impex inspection machine which can do sophisticated non-destructive cross-sections using a very fine fiber probe.
Mentor Discusses New DFT, DFM, and Design Verification Tools
At electronica 2018, John McMillan, digital marketing program manager-Electronic Board Systems, and Mark Laing, business development manager-Valor Division of Mentor, a Siemens business, discuss new tools for PCB design verification, as well as design for manufacturing (DFM) and design for testing (DFT).
Copyright © 2022 I-Connect007. All rights reserved.