Lost your password?
Not a member?
Resend confirmation instructions
Sort By Category
- New Technology
- Printed Electronics
- New Products
- Test & Inspection
- Fabrication Process
- IPC Standards
- From The Show
- PCB Fabricator
- Market Impact Content
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
09/23/2022 | Andy Shaughnessy, Design007 Magazine
IPC: Companies Are Intentional About Tracking Environmental and Social Risks
09/22/2022 | Suhani Chitalia and Kelly Scanlon, IPC
EIPC Technical Snapshot: Novel Laser-based Manufacturing Processes in Automotive Electronics
09/22/2022 | Pete Starkey, I-Connect007
The Brave New World of the CTO
09/21/2022 | I-Connect007 Editorial Team
Pricing Strategies With Michael Carano
09/13/2022 | I-Connect007 Editorial Team
PCB :: Twitter
Real Time with...IPC: American Standard Circuits Strives to Define the Future of PCB Technology
VP of Operations Olson discussed his company's wide range of technology and how they are poised to take on whatever their customers need.
Ladle on Manufacturing: Drilling Deep
Whether you stack high or drill thick panels, the dynamics of drilling are similar. When you overlay the outer-layer artworks you may notice that the holes on the exit side of the panel or stack have a much higher level of positional variation than the entry side holes.
Real Time with...IPC: MacDermid Enthone Positions Itself to Meet the Needs of the Electronics Supply Chain
Warren Kenzie, Technical Director at Macdermid Enthone, discusses with I-Connect007 Guest Editor Mike Carano the critical need to develop equipment sets that are properly designed to ensure optimal functioning of the production processes. He also noted the need to understand the relationship between materials, chemistry, equipment, and people.
EIPC 2017 Winter Conference Review of Day 2
Almost everyone made it back to the conference room for the start of the second day of the EIPC Winter Conference in Salzburg, even those who had enjoyed the late networking session into the early hours!
EIPC 2017 Winter Conference Review of Day 1
Themed to address the question: “The Future Needs of the Global Electronics Industry: What Solutions will Europe Provide?" the conference was a truly international event, attracting delegates from thirteen countries, to hear a well-chosen programme of twenty presentations in five sessions, introduced by EIPC Chairman Alun Morgan.
Weiner’s World—January 2017
This month’s column is a bit shorter than usual as we prepare for next month’s IPC APEX EXPO and its Executive Forum for PCB fabricators and their supply chain. This month also marks the 65th anniversary of Epec LLC in New Bedford, Massachusetts. The company, founded in 1952, is the oldest printed circuit fabricator in North America. Half of its $50 million in sales is reported to be with printed circuits.
Electroplated Copper Filling of Through-holes: Influence on Hole Geometry
The process consists of a two-step acid copper plating cycle. The first step utilizes periodic pulse reverse (PPR) electroplating to form a conductive copper bridge across the middle of a through-hole and is followed by direct current electroplating to fill the resultant vias formed in the bridge cycle.
Trouble in Your Tank: Acid Copper Plating
Electroplating a printed circuit board is by no means a trivial task. Higher layer counts, smaller-diameter vias (through-hole and blind) as well as higher-performance material sets contribute to the greater degree of difficulty with today’s technology.
Help Wanted! Our 2017 Industry Hiring Survey
This month we conducted an industry survey on plans for hiring during the year. Included here is a summary of the results. We started by simply asking, “Do you plan to hire additional people this year?” More than half of the respondents answered yes while about a third said no—which we take as an optimistic sign that our industry plans to expand in 2017.
Study of Immersion Gold Processes Used for Both ENIG & ENEPIG
The use of electroless nickel/electroless palladium/immersion gold (ENEPIG) has been steadily increasing the past several years and benefits of the finish have now become well-known throughout the industry. The finish provides both reliable solder joints and wire bonds
Now is the Time for Comprehensive Tax Reform
Tax policy is among the most basic tools of any government to accomplish its objectives. From the private sector perspective, taxes are one of largest expenses of any business. But despite being such an important topic for government and business, there is widespread agreement that the U.S. federal tax code is a mess.
Catching up with…Nessis Inc. President Kathleen Niles
When I checked in on one of my old PCB sales associates recently, he told me that he had a new gig selling the latest and greatest new productivity software tools. He spoke so highly about Nessis Inc. and what their tools could do for companies, especially PCB shops, that I decided to learn more. I arranged to talk with Kathleen Niles, the co-founder and president of Nessis Inc. Here is a portion of that conversation.
Patty’s Perspective: Everything Old is New Again
This month’s issue is all about plating and surface finishes; long ago, that was pretty much my start in the world of printed circuits—wet processing. So this is kind of my home turf—and not, since I haven’t worked in wet processing for some…well, for many years. I’ve always expected that I could hop right back onto the plating room floor and pick right up where I left off all those years ago. Or could I? Have things changed much? Time to read on and see.
Understanding Rush PCB
I had an interesting interview recently with Rush PCB CEO Akber Roy, who goes by Roy. I was stunned by some of the things he told me about the Silicon Valley company, such as how Rush PCB can turn around full turn-key quotes in less than three hours. He also told me they can deliver full turn-key product in five days or less, sometimes three days.
WKK and Schmoll Join Forces in China
Tom Burkhardt of Schmoll Maschinen and Hamed El-Abd of WKK spoke with Publisher Barry Matties about the recently formed distribution partnership between the two companies and specifically how each company stands to benefit from this pairing.
Ladle on Manufacturing: Material Matters
Have you considered whether or not you could improve your multilayer yields by better use of your base materials? Perhaps the following could give you a few ideas of how this could help you.
Catching up with...Coast to Coast Circuits CEO Walt Stender
Coast to Coast is an independent American circuit board manufacturing company. Yes, the key word here is “independent.” After many mergers and acquisitions that have diminished the mil/aero PCB vendor base, there are only a handful of independent companies for our country’s defense and aerospace contractors to choose from.
Book Review: Simply Brilliant—Powerful Techniques to Unlock your Creativity and Spark New Ideas
This is more than a brainstorming book, much more. In his new book, Schroeder teaches the reader not only how to brainstorm in a group, but also how to come up with ideas as an individual.
Catching up with…LinkedIn Expert Bruce Johnston
My friend and business associate Bruce Johnston was named one of the LinkedIn Thought Leaders—The USA & Canada List (100+) by Andy O’Hearn, an expert LinkedIn coach and social media analyst. When you consider that there are over 467 million LinkedIn members, being in this list of approximately 100 is a pretty big deal.
CES 2017: Press Day, LaunchIt and Showstoppers
Before the show opens, CES provides two days and evenings not open to the general attendees, to enable companies, large and small, an opportunity to present their new offerings to the press. These opportunities range from small meetings with individual members of the trade press to huge events such as those presented by Samsung, Asus, Sony, Intel, Panasonic and others, with literally several hundred in attendance.
Emmy Ross Discusses the New I-Connect007 E-Book Series
One thing that is long overdue in our industry is a series of guidebooks focused on helping companies with all their needs, from qualifications like AS9100 and Mil-P-31032 to various technologies, heavy copper, rigid-flex and microvias. I-Connect007 is now providing our industry with an entire series of these guidebooks, starting with the first book, "The Printed Circuits Buyers Guide to… AS9100 Certification." Authored by Imagineering Inc., this book educates readers about the AS9100 quality standard, and explains how to earn this certification.
Five New Books that Will Change Your Perspective on Sales and Marketing
In honor of the December topic of sales and marketing of The PCB Magazine, I’m providing a review of five books that can directly influence the way we think about sales, marketing, customers and customer service.
CES Unveiled: Press Day and the NVIDIA Keynote
CES Unveiled exhibitors range from well-known companies such as: Lenovo, showing their latest high-end (and very impressive) notebooks, tablets and all in one computers; Ampad, with their new series of very capable fast and long range routers; and Thrustmaster, showcasing their virtual reality-ready gaming peripherals. Additionally, there are many previously almost unknown companies exhibiting many IoT items.
On Location at HKPCA: IPC’s Mitchell and Carmichael on Asia, the Global Industry Outlook, and Trump
While in Shenzhen, China recently, with the PCB industry’s biggest trade show as a backdrop, Publisher Barry Matties sat down once again to interview IPC President John Mitchell and IPC Asia President Phil Carmichael. This time they discussed trends they’re seeing in the Asia-Pacific region and what a Trump presidency means to the industry.
Catching up with...M&A Expert Tom Kastner
If you want to know what is going on in our industry when it comes to mergers and acquisitions, there is no better person to turn to than Tom Kastner. Whenever I want to verify a rumor of a company being bought or sold, Tom is the first person I call, and unless he is under an NDA, he will fill me in. In this, our latest discussion, we talked about the PCB industry’s M&A activity in 2016 and what Tom expects to see in 2017.
CES 2017: Preview and a Projection for the Future
Well here we are again; one more year has gone. Think back to one year ago and look at all that has happened, including recent political happenings, technical advances in 3-D printing and manufacturing, and the huge improvement in display technology, what with OLED and HDR putting everyday 4K displays into the background and driving the proverbial nail in 3D TVs.
Catching up with…Dr. Anthony Caputo
I met Dr. Anthony Caputo last year while helping one of my clients secure some strong engineering talent. Anthony had been reading my columns and reached out to me since he was looking for a new opportunity in a high-tech printed circuit board facility. Once I read his CV and saw his credentials, I jumped at that chance to help this talented young man.
Rather than joining the annual forecast fray by attempting to provide guidance or guesses as to the outlook for the PCB and electronic assembly businesses in 2017, I thought I would provide a different year-end assessment. Here are a few thoughts for the New Year and beyond from a long-term colleague and friend of the past half century, Harvey Miller, electronics market researcher, consultant and founder of Fabfile Online.
Supplier Spotlight: American Standard Circuits' AS9100 Journey
I had the privilege of working with American Standard Circuits (ASC) over the past year with their successful pursuit of AS9100 quality management system certification. The company has chosen to share their approach, lessons learned and benefits gained by going through this formidable process.
TTM President Thomas Edman on the Global PCB Market, Technology, and More
The TTM and Viasystems merger put the PCB industry on notice last year when it created one of the biggest powerhouses in the world. At this year’s HKPCA and IPC show, Barry Matties met with TTM Technologies President and Chief Executive Officer, Thomas Edman to get his views on the market, technology, the culture of TTM and even the Trump effect.
Book Review: Leading the Unleadable—How to Manage Mavericks, Cynics, Divas, and Other Difficult People
This is the book you’ve been looking for. I approached this book with a bit of trepidation. I wasn’t sure what this was going to be about. But being inquisitive, I decided to give it a read. It was the subtitle "How to Manage Mavericks, Cynics, Divas, and other Difficult People" that got to me.
'Can Do' in CAM Outsourcing: CAM Engineering – Automation
As volume production in PCB has shifted significantly to Asia, manufacturers in Europe and North America have been focusing on high technology, quick-turn, prototype, and lower-volume production.
Ladle on Manufacturing: Making Suppliers Work for You
Every company has its own way of doing things. For some, the engineering team develops a detailed specification for the equipment they would like to purchase and this is put out to multiple suppliers for tender, along with full documentation for the commercial terms that will apply to the purchase. At the other end of the scale, a machine inquiry can be a simple phone call: “How much for a new machine?”
Innovative Use of Vias for Density Improvements
In today’s fast-paced global, economic environment—which requires constant innovation, upskilling, and performance improvements— there is a need for increasing density. The classic way to increase density is to reduce the trace and spacing.
Patty’s Perspective: Everything You Want to Know about Vias but Were Afraid to Ask
Regarding our survey on vias, almost 85% of our respondents said they used blind/buried vias. And since 15% of those answering were either suppliers or consultants, it seems that approximately 100% use the B/Bs. OK then, on to a tougher question. We then asked how often, and it turns out that “use” covers everything from rarely to pretty much all the time, with a definite undercurrent of “because we have to.”
New Tools Mean More Designer Control for High-Speed PCBs
In the last hour of the electronica exhibition in Munich, Pete Starkey finally got the opportunity to sit down with Martyn Gaudion, Managing Director of Polar Instruments. They discussed the changing state of PCB design, and how the newest software tools allow PCB designers and engineers to have more control when designing high-speed PCBs.
Advanced UV Lasers for Fast, High-Precision PCB Manufacturing
For more than 30 years, lasers have played a significant role in the manufacturing of PCBs. It is not a coincidence that electronic devices have, at the same time, become increasingly miniaturized. The ability to tightly focus a laser beam much smaller than a mechanical tool has been an enabler of such dense, compact circuitry; and the elimination of consumables such as drilling and routing bits has reduced manufacturing costs.
Aismalibar on Markets, Materials, and the Increase in Copper Prices
As a European laminate provider specializing in insulated metal substrates and thermal management, Aismalibar is often put in the demanding position of catering to some of Europe’s toughest customers, including the automotive industry. Pete Starkey and Barry Matties caught up with Director General Eduardo Benmayor at the most recent Electronica trade show to learn more about the company and get his take on the current state of the IMS marketplace.
Here we go again! The winter holiday (and trade show) season is upon us! Electronica's mood was upbeat. Next, the Asia and San Diego shows. We just received word as we were preparing for our trip to next month's HKPCA/IPC event in Shenzhen China that the CPCA (China Printed Circuit Association) show suddenly changed its March 2017 date and venue. Meanwhile, the HKPCA show, now billed as our industry's largest event, will have nearly 550 exhibitors—of which 20% are new.
KCE Group: A Thailand-Based PCB Manufacturer with a Growing Global Footprint
Recently, while at electronica in Munich, Germany I-Connect007's Judy Warner met KCE America President Rick Rhodes, and Joe Yeo of KCE Group. They discuss the unique challenges and opportunities that come with the rigorous automotive market, and explain why they continue to enjoy explosive growth.
Rogers on the Booming Wireless Infrastructure Market
With the advent of 5G and next generation antennas, the already booming wireless infrastructure market is slated for continued growth through 2021, and as the primary material supplier for this sector, Rogers Corp. must continue to meet the technological demands of the Verizons and AT&Ts of world.
Walt Custer’s Global Market Outlook
With 2016 winding down, Walt Custer shared his end-of-the-year market research data with me at the recent electronica trade show in Munich, Germany. In our interview, Walt breaks down his findings and offers insight into the changing trends as we head into 2017.
Mr. Laminate Tells All: The Certification of IPC-4101D Polyimide Base Materials: Buyer Beware
At the most recent IPC meeting held in Rosemont, Illinois, one of the hot topics of discussion at the Laminate and Prepreg Subcommittee was the three polyimide specification sheets. The header portion for the three polyimide-based copper-clad laminates and prepregs are shown in Figure 1, for easy comparison of polyimide grades.
Rogers Highlights Thermally Enhanced 92ML Materials at electronica
I met with Rogers Corporation Business Development Manager John Ranieri at Electronica recently. Ranieri’s professional focus is on the 92ML series of laminate, prepregs, and IMS, which was highlighted at the Munich show. The 92ML products are geared for the power electronics marketplace where thermal management is a major concern.
HKPCA’s Daniel Chan on China’s PCB Manufacturing and Technology Landscape
Editor Edy Yu recently spoke with Daniel Chan, executive director of the Hong Kong Printed Circuit Association (HKPCA). Chan possesses more than 25 years of experience in global business management with strong leadership influencing suppliers and internal clients in business strategy and transformation.
electronica 2016 Impressions
Germany’s third-largest city, and capital of the southeastern state of Bavaria, Munich was once more host to electronica, which can justifiably claim to be the world’s leading trade fair for electronic components, systems and applications.
Let's Talk Testing: Vias for Dummies
In simple terms, a circuit board is but a composition of things designed to be connected and not. The number of layers and number of connections make no real difference as the geometry shapes the landscape.
What’s New with IPC’s Validation Services
During this year’s IPC Fall Committee Meetings, held in conjunction with SMTAI in Chicago, I met with my friend Randy Cherry, director of IPC Validation Services. Since the inception of Validation Services three years ago, I’ve conducted video interviews with Randy at IPC APEX EXPO, and I've been tracking the growth and progress of this program. I decided that this would be a great opportunity to do a mid-year check-up on IPC’s Validation Service programs.
Catching Up (Literally) with Uyemura’s George Milad at SMTAI 2016
I managed to catch up with George Milad of Uyemura at the recent SMTA International conference, which wasn’t easy to do. But he did take a few minutes to fill me in on his schedule for the week and it sure was packed—with a tutorial, presentations and IPC committee meetings.
World Mastery: Automotive Electronics Driving Business Growth
I-Connect007’s Pete Starkey is in the booth of China PCB manufacturer World Mastery to speak with Thomas Ip, Director of Sales and Marketing, about their manufacturing capabilities, and their key industry segments in Europe.
EIPC's Alun Morgan Holds Forth on electronica
EIPC’s Alun Morgan and Editor Pete Starkey discuss electronica's rise to prominence as the best place to meet not just EIPC members but also a broad spectrum of the value chain—designers through OEMs.
IPC’s President on IPC EDGE: Cutting Edge and Education
Chatting with IPC President John Mitchell is always a good time—he never fails to be upbeat and full of ideas, and his eagerness to fill us in on what’s happening with IPC was evident during our recent interview at the IPC Fall Committee Meetings, co-located with SMTAI in late September.
Ventec Talks Strategies to Gain Market Share
At electronica 2016 in Munich, Germany, Tamara den Daas, OEM global account manager at Ventec International Group, speaks with I-Connect007’s Pete Starkey about Ventec Europe’s 10th anniversary, as well as the relevance of electronica for the company. She also discusses Ventec's strategies for gaining market share through PCB designers on the OEM side.
Tech Talk: 225 Tech Talks—1995 to 2016
Checking back on Tech Talk Nos. 100 and 200, which reflected on past and anticipated future changes in electronic packaging, I noted the production shift to Asia, followed by the relocation of the supplier base, and, more recently, the design of electronic devices.
Ventec Sees Growth in Automotive Electronics
Didier Mauve, sales and marketing manager for Ventec Europe, talks with Editor Pete Starkey during electronica 2016 about how the automotive electronics industry is driving growth for the company.
Lessons in Leadership From My Father
When I was asked to contribute an article for this issue on leadership, I thought it was an opportune time since my Dad, Nagji Sutariya, had recently passed away. I had spent nearly every daylight hour with him since I started working with him at Saturn in 2001.
TTM SJ Hosts IPC Designers Council Meeting
The Silicon Valley Chapter of the IPC Designers Council was treated to a delicious barbecue lunch on October 13 at TTM’s San Jose facility. About 20 PCB designers and support professionals gathered for the tri-tip lunch-n-learn conference.
One World, One Industry: Six Leadership Lessons from 20 Years in the Electronics Industry
The orchestra conductor is an apt metaphor for the successful leader. Effective leadership often boils down to the ability to inspire others (the symphony) to their best work, while keeping and driving the overall vision of the organization (the musical score).
Made in Brazil: Leadership Lessons from the Rio Olympics 2016
This month’s column is not about PCB technical stuff; instead, it’s about some valuable lessons I have learned this summer during that most fantastic of events, the Olympics. What I have learned can now be applied to PCBs and how we can transform a glass-reinforced laminate or any other bare material into an incredibly useful product that will make the difference in every single life of this planet.
BizBrain IQ Test: The Suprising Results
Focusing upon the work of W. Edwards Deming, Peter Senge, Buckminster Fuller, Ilya Prigogine, and John S. Bell, David became an expert in workplace systems improvement. Since 1990, he has been training and consulting using his Four New Agreements for Leaders and Managers as a proven model for sustainable organizational transformation, with remarkable results. Today, he is the president of Dibble Leaders.
All About Flex: Specifying a Flexible Circuit
IPC has created a specification document, IPC 6013, which is referenced for many flex circuit applications. This commercial document, in combination with the CAD data and print, is used as the product specification. Most flexible circuitry fabricators’ internal quality standards are based on IPC 6013.
New Developments at MacDermid Enthone
One of the best parts of industry conferences and shows is the opportunity to meet new people and renew acquaintances. Another highly enjoyable part is learning what is going on within companies—especially those with which one has had a close association in the past.
This year’s TPCA (Taiwan Printed Circuits Association) show held October 26–28 seemed to have lighter attendance than last year. Robots were on display everywhere, with lot of loaders and unloaders as well as the multi-axis, multipurpose types.
Book Review: Hard-Won Wisdom—True Stories from the Management Trenches
Author Jathan Janove is a workplace litigation lawyer. He has spent the bulk of his career litigating workplace relationships, which gives his book a completely fresh and different perspective to workplace management techniques.
IPC Validation Services Audit Program to Include Laminate, Prepreg Manufacturers
Essex Technologies’ Doug Sober is a long-time IPC chairman who is now also working with IPC’s Validation Services division. I met with Doug while at the recent SMTA International conference, and we discussed the upcoming audit program for laminate manufacturers, which is ready to go.
Schoeller Electronics Presenting a New Organizational Structure in North America
At the recent SMTA International show in Rosemont, Illinois, I met Padraig McCabe at Schoeller Electronics Systems’ booth. It was obvious that they had a lot going on so it was good to be able to sit down and get the full story of their new organizational structure, name change and the recent acquisitions of PCB companies.
Standard of Excellence: Let’s Get Flexible
Although flex and rigid-flex technology has been around for many years, it is only in recent years that it has come into its own. The reason for the increased requirements for the flex and rigid-flex technology is simple: Devices are getting smaller.
Speeding up the PCB Manufacturing Process
Lino Sousa of Pluritec discusses the next generation of equipment that's speeding up drill room processes. He also explains how technologists can now coat soldermask, tack cure, and be ready for imaging in 25 minutes or less. Sousa says a three-year ROI can be found in reduced electricity consumption alone.
All About Flex: Five Characteristics of a Reliable Flexible Circuit Supplier
Due diligence when selecting a source for a custom electronic product can be a critical sourcing procedure. Chains are only as good as the weakest link, and the electronic components assembled to create a marketable product need to combine into a robust solution.
Book Review: What Customers Crave
Customer service is out and customer experience is in. It’s not enough to deliver great customer service anymore— instead you must deliver an entire customer experience and a great experience at that. Customers want to feel good about the very act of working with you. They want to feel that you are on their side; and that you have their best interests at heart.
Patty’s Perspective: Take Me to Your Leader
We must have touched a real hot button when we decided to do this issue on leadership. When we sent out our survey on the topic, we received a lot of responses, which we’ll review in a separate article, plus many of our regular columnists were inspired to write on the subject.
The Sum of All Parts: Three Keys to Successful Leadership
It is often easy to lose sight, particularly in the manufacturing sector, of your most valuable resource: people. You can’t take purchase orders, operate equipment and develop new strategies all on your own.
Happy’s Essential Skills: Online Instruction and Long-Distance Learning
More and more knowledge is now available over the Internet. For this to be effective, there are specific requirements for a course taken or produced over the Internet (without a live instructor) in order for the instructed (user) to have a positive experience.
Setting the Standard at American Standard Circuits
With an impressive array of investments on display, both in terms of technology and software, as well as its 120 employees, ASC offers a diversified product mix. Publisher Barry Matties and members of the I-Connect007 team recently took a tour of the American Standard Circuits facility in West Chicago, Illinois. In this interview, Anaya Vardya shares their strategies and the challenges the market faces.
In our now well-known monthly topic survey, we got some very interesting results on leadership. Most of the questions were designed to be open-ended, specifically to encourage original answers—to keep our respondents from just checking off a few boxes. Many of the answers were rather intriguing—and unexpected.
Copyright © 2022 I-Connect007. All rights reserved.