Keysight Gains Validation for First 3GPP Release 16 16/32 Transmitter Performance Enhancement Test Cases
January 30, 2024 | Keysight Technologies, Inc.Estimated reading time: 1 minute
Keysight Technologies, Inc. gained approval for the industry's first 3GPP Release 16 (Rel-16) 5G New Radio (NR) single and multiple precoding matrix indicator (PMI) test cases for 16 and 32 element transmitters operating on the frequency-division duplexing (FDD) and time-division duplexing (TDD) bands. The validated test cases, which are for use with Keysight's 5G network emulation conformance test platform (TP168), were obtained at the Conformance Agreement Group (CAG) #77 meeting of the Global Certification Forum (GCF) hosted by Keysight in Malaga, Spain during January.
Networks based on 5G NR standards support multi-antenna technologies known as MIMO, which improve spectral efficiency and enhance communication. To implement multi-antenna systems, enhanced precoding techniques are applied to the transmitter to map data into the different transmit antennas. The optimal precoding depends on a PMI Codebook value reported by the device, which makes the choice from several precoding options based on its own channel measurements.
As part of Rel-16, the 3GPP added new test cases to validate device performance in multi-antenna systems. Keysight S8705A RF/RRM test solution is the first to gain validation for these new tests, which require unprecedented fading resources to emulate 16 and 32 transmitter connections to use equipment (UE) with 2 and 4 receivers.
Keysight also achieved the following achievements supporting Release 17 (Rel-17) Enhanced Power Saving and RedCap features:
- Validation of test cases verifying UE support of a function that reduces the number of times a device interacts with the network, in order to extend the battery life of devices using the S8705A RF/RRM test solution.
- Validation of test cases ensuring RedCap devices support the Rel-17 increase in the extended discontinuous reception (eDRX) cycle, which is the duration of time a device is in sleep mode in order to extend battery life. This was completed with the Keysight S8704A Protocol Conformance Toolset and activates the RedCap Rel-17 eDRX GCF work item.
Muthu Kumaran, General Manager of Keysight's Device Acceptance Solutions, said: "Enhancing connection performance is a priority for network operators to deliver a better quality of service to final users. Multi-antenna systems are possible with NR and now the first approved tests are brought into the market by Keysight to ensure device's performance is thoroughly tested. Additionally, validations supporting Rel-17 Enhanced Power Saving features are crucial to drive advancements in 5G NR Rel-17 for commercial 5G NR and RedCap devices market introduction."
Suggested Items
Manta Ray UUV Prototype Completes In-Water Testing
05/02/2024 | DARPAThe Manta Ray prototype uncrewed underwater vehicle (UUV) built by performer Northrop Grumman completed full-scale, in-water testing off the coast of Southern California in February and March 2024.
Real Time with… IPC APEX EXPO 2024: Exploring Electronic Card Testing and AI Integration with SPEA
05/02/2024 | Real Time with...IPC APEX EXPOLuca Fanelli, president of SPEA, and vice president Andrea Furnari discuss the company and its business units. The challenges in testing electronic cards and SPEA's solutions are discussed, and its focus on the US market is emphasized. The use of AI in testing, particularly in optical inspection and test program execution, is also examined.
Boeing T-7A Red Hawk Triples Progress
05/01/2024 | BoeingThe Boeing T-7A Red Hawk achieved three recent milestones, propelling the advanced pilot trainer for the U.S. Air Force forward.
Keysight Secures New Test Case Validations for Narrowband Non-Terrestrial Networks Standard
04/30/2024 | Keysight TechnologiesKeysight Technologies, Inc. has validated new conformance test cases for 3rd Generation Partnership Project (3GPP) Release 17 (Rel-17) standards for non-terrestrial networks (NTN) using narrowband internet of things (NB-IoT) technology.
Latest Test and Inspection Solutions from GOEPEL electronic at SMTconnect 2024
04/29/2024 | GOEPEL electronicGOEPEL electronic will be demonstrating automated test and inspection equipment at SMTconnect, taking place in Nuremberg from June 11 to 13, 2024.