USPAE to Springboard U.S. Technology Forward
April 30, 2024 | Marcy LaRont, PCB007 MagazineEstimated reading time: 2 minutes
The U.S. Partnership for Assured Electronics (USPAE) was launched as a nonprofit subsidiary of IPC in 2020 specifically to manage the DoD relationship and access to funding and to develop a cooperative facility to develop ultra HDI capabilities in the U.S., not only for the defense sector but for the whole of the U.S. electronics industry.
Though a multifaceted initiative, its primary objective is to bring very high-tech manufacturing capability to the U.S. to lessen reliance on foreign sources for critical parts of our supply chain. It carries a great hope that we will never allow ourselves to fall behind technologically as we have over the past three decades and, moreover, that we will, once again, become global technology leaders in this space.
Marcy LaRont: Joe, would you explain the Printed Circuit Board Market Catalyst (PCBMC)?
Joe O’Neil: Formerly referred to as NewCo, the proposed Printed Circuit Board Market Catalyst is a unique public-private partnership (PPP) that will be designed to deliver five core benefits to the U.S. industry and government.
The first core benefit is to quickly bring ultra high density interconnect (UHDI) capability to any U.S. PCB manufacturer as a subcontracted service. Second, PCBMC will catalyze commercial and government demand for domestic UHDI PCBs. Third, this PPP will transfer all the knowledge and expertise to operate a UHDI manufacturing facility to any U.S. PCB domestic manufacturer. The fourth core benefit provides education and workforce development. The PCBMC will be growing and upskilling the current workforce while attracting new workers into the industry. Finally, we will be delivering leapfrog technologies through R&D efforts to help U.S. PCB manufacturers become and stay more competitive globally.
LaRont: That is a big initiative with important goals. How did this project come about?
O’Neil: This project has been developed by industry, for industry. USPAE began holding industry workshops with government input in late 2022 and early 2023 to better understand the challenges and start devising a solution. In the fall of 2023, the Department of Defense provided funding to USPAE to conduct qualitative and quantitative research documenting those needs and formally propose solutions for the PCBMC. We've got a great team.
LaRont: Using the PPP business model, how will this facility bring UHDI capabilities to PCB manufacturers?
O’Neil: With a mix of both government and private funding, our vision has been that the proposed manufacturing facility will be rapidly stood up utilizing modified semi-additive process (mSAP) technology. Once the facility is operational, the PCBMC will begin providing UHDI subcontracting services to the U.S. PCB fabrication base.
To read the rest of this article, which appeared in the April 2024 issue of PCB007 Magazine, click here.
Suggested Items
Real Time with... IPC APEX EXPO 2024: Electra's Passion for Inkjet Solder Mask Technology
05/15/2024 | Real Time with...IPC APEX EXPODon Monn, national sales manager for Electra Polymers, discusses his transition to Electra and the benefits of inkjet solder mask technology. He emphasizes the significance of product passion and understanding customer issues. Don also outlines Electra's mission and expansion plans, and addresses the current state of the PCB market and the importance of education.
The Shaughnessy Report: Unlock Your High-speed Material Constraints
05/15/2024 | Andy Shaughnessy -- Column: The Shaughnessy ReportThe world of PCB materials used to be a fairly simple one. It was divided into two groups: the “traditional” laminates, often called FR-4, and the high-speed laminates developed especially for high-speed PCBs. These were two worlds that usually didn’t collide. But then traditional laminates started getting better, and high-speed designers and design engineers took notice and started to reconsider what FR-4 could be used for.
Standard of Excellence: Collaboration—The Right Path to Innovation
05/15/2024 | Anaya Vardya -- Column: Standard of ExcellenceNow more than ever, as new and innovative technologies for printed circuit boards are in demand, we need collaboration between PCB designers, fabricators, and assemblers. Close partnerships with PCB designers and assemblers are key to developing and producing PCBs with boards with new and innovative technology. These collaborative partnerships, along with the partnership with the end customers, are more critical than ever before.
A Potpourri of Design PD Classes
05/14/2024 |What is invention without innovation? What is innovation without capability? Kelly Dack addresses these questions and more in this review of the Professional Development courses at IPC APEX EXPO, including the flex course lead by "Flexperts" Mark Finstad and Nick Koop.
Breaking High-speed Material Constraints: Design007 Magazine — May 2024
05/14/2024 | I-Connect007 Editorial TeamDo you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems instead of high-speed materials, saving time and money while streamlining the fab process. In the May 2024 issue of Design007 Magazine, our contributors explain how to avoid overconstraining your materials when working with high-speed boards.