Submit Your Abstract for IPC Electronics Materials Forum


Reading time ( words)

Join us for the IPC Electronics Materials Forum as a presenter and share your expertise on electronics materials. IPC invites engineers, researchers, academics, technical experts and industry leaders to submit abstracts for the IPC Electronics Materials Forum to be held June 18, 2020 in Raleigh, NC, in conjunction with IPC SummerCom.

The Electronics Materials Forum will focus on developments in materials and processes associated with advanced electronics assembly and manufacturing. The content will focus on materials for board fabrication, assembly, and post-assembly protection.

Expert technical presentations are being sought in the following areas:

Substrate Materials:

  • Novel board laminates
  • Surface finishes
  • Solder mask advancements
  • Flexible/wearable circuits
  • HDI developments

Assembly Materials:

  • New solder alloys
  • Flux development
  • Cleaning chemistries
  • Assembly process strategies
  • Thermal interface solutions

Protective Materials:

  • Cleaning chemistries
  • Conformal coatings
  • Adhesives
  • Underfills

Submit your abstract by February 27, 2020 by emailing Brook Sandy-Smith, IPC technical conference program manager.

For information on sponsorship or table-top exhibitor opportunities please contact Alicia Balonek, IPC senior director, tradeshows & events.

For further information on this event, please contact Brook Sandy-Smith, IPC technical conference program manager.

Share

Print


Suggested Items

Benchmarking Your Process Engineering

04/29/2021 | I-Connect007 Editorial Team
Mark Thompson has been in bare board fabrication for over 30 years. He is now laying out printed circuit boards at Monsoon Solutions, a high-tech design bureau near Seattle, Washington. With Mark’s extensive hands-on knowledge of PCB manufacturing, he brings a unique perspective to PCB design. In this discussion with the I-Connect007 editorial team, Mark shares what’s important from a process engineer’s point of view, and how to stay on top of evaluating and benchmarking your manufacturing process, along with insights from his new role as a designer.

EIPC Technical Snapshot: 5G and Loss Minimisation

03/26/2021 | Pete Starkey, I-Connect007
Bringing a specialised technical area into sharp focus, this month’s topic was “5G and the understanding of loss minimisation at the PCB level,” with papers on dielectric material, copper foil, and modelling solutions. The webinar was moderated by EIPC board member Paul Waldner managing director of Multiline International Europa, who admitted that he had managed to get a haircut especially for the occasion!

PCB Requirements for E-Mobility

03/23/2021 | I-Connect007 Editorial Team
Nolan Johnson, Barry Matties, and Happy Holden speak with Christian Klein, section manager for PCBs in the automotive electronics division, about Bosch’s recent presentation on PCB requirements of the future in regard to automotive and electro mobility trends and challenges.



Copyright © 2021 I-Connect007. All rights reserved.