-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
Getting to Know Your Designer
In this issue, we examine how fabs work with their design customers, educating them on the critical elements of fabrication needed to be successful, as well as the many tradeoffs involved. How well do you really know your customer? What makes for a closer, more synchronized working relationship?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
This Month in SMT007 Magazine: How Engineers Can Use SPI Tools for Verification
May 6, 2020 | Nolan Johnson, I-Connect007Estimated reading time: 6 minutes
Koh Young’s Ray Welch and Brent Fischthal detail how engineers can work with SPI tools to verify how small they can go in component size with their solder paste application, and how the company’s SPI equipment is helping not only to verify but also to help drive the development collaboration between solder paste and stencil printer manufacturers, and inspection tools and software.
Nolan Johnson: What trends and advancements do you see right now in solder and solder application in the manufacturing process?
Ray Welch: You may be familiar with Chrys Shea’s new SMTA miniaturization test vehicle (MTV). I’ve worked with her and Indium recently, using this new test vehicle; she’s trying to give people a tool to be able to challenge themselves to print smaller and smaller. That test vehicle goes down to 008004 chip components. I don’t know of any customers that we have that are printing that small yet, in terms of chip components, but we have people who are printing near wafer-level prints for RF devices and cellphones. I was working with Indium because they were trying to verify their new pastes and how well they perform for the smaller parts. We’ve been working with our industry partners to help them understand how to use our SPI to be able to get accurate measurements for the smaller and smaller parts.
Johnson: This sounds like a bit of back and forth, building operator skillsets while also verifying that the machines can do that kind of feature size.
Welch: Yes, Chrys and I went to MPM in Hopkinton, Massachusetts. Indium was there, and they wanted to verify several of their new pastes for printing the smallest part at this time. The challenge for us was to make sure that we could measure such small parts, and we can. We performed a DOE, and everything worked out quite well, both in terms of solder paste performance and the Koh Young SPI system. Since then, I helped Indium remotely to use the Koh Young SPI system they have at their shop to verify their pastes. Again, I don’t have any end-users that I know of using the 008004 parts yet, but we’re giving them a system via the aSPIre3 and 10-micron lens resolution to be able to inspect those smaller parts.
Johnson: The equipment and material suppliers have proven that they can deliver the functionality needed for the current smallest parts of the market, even if people may not be using them yet.
Welch: Yes, but the caveat to that is that when-ever we do something in the lab with a bunch of engineers involved, you can oftentimes get very good results. You don’t always get those results when you put it into manufacturing.
Since joining Koh Young in April 2016, I’ve visited about 50 customers delivering our two- to three-day SPI and print process characterization training program. People can’t print those small parts until they improve the discipline of their process. For a number of customers, it seems the operators have hijacked the SPI process. The engineers aren’t there or don’t like to go out to the line except when there are serious issues. Many times, the process engineers aren’t watching over the process like they should or don’t know the process as well as they should, so there will be a reality check when they move to smaller and smaller parts. Johnson: Is it fair to say that the control of the inspection processes on the manufacturing floor with the manufacturing operators who are under one set of incentives for part of their job that may be at odds with being accurate and getting good yields, and not having field failures later
Welch: That’s correct. A lot of engineers don’t want to be called to the line if they don’t have to be, so they leave it to the operators or process technicians. If they don’t visit often enough, then the operators are going to hijack the process and do whatever they think is right. I’ve stood there many times watching an operator pass boards that should have been failed. I call those “wall of shame” examples, where they’ve opened up the inspection tolerances, or the operators are doing whatever they want to do, and then products are escaping SPI. They have a great tool in SPI, but they’re not using the tool as best they can. That will definitely be a challenge when they get to the smaller parts.
Johnson: Let’s paint a possible scenario then. Right now, maybe it’s working, they’re getting by, and they’re doing okay purely by accident. As they move to smaller and smaller parts, that’s going to break at some point. What should they be looking for, and how do you fix it?
Welch: SPI reveals the sins of the process. I’m trying to teach people how to use the tool as best they can, as well as tools and techniques for analyzing the data. It’s also important not to be driven by just defects but by the para-metric data that shows them how well the process is performing in terms of process capability. Then, it’s about improving the process and not just trying to turn off SPI defects.
Johnson: This must be a challenge. You’re providing products that could help customers see fewer field failures and better yield, but by default, it’s exposing the dirty laundry in the process. That can be potentially embarrassing or even job threatening. How do you change that from a threat to a benefit
Brent Fischthal: When Ray delivers these engagements to our customers, he helps them understand how to use SPI. SPI has been around for a while, but not everyone uses it the right way. Sometimes, bad habits form. This specific class resets those bad habits. We’re educating them on how to implement the best practices. Ray does find that wrong processes have been implemented, or that operators are using it incorrectly or sub-optimally. Everybody who has experienced Ray’s class has come away appreciative of the insight they’ve gained. More importantly, most change the way they’ve been doing things right away.
Johnson: If you don’t have support from the C-level executives, then you may encounter managers who have a very different set of objectives.
Fischthal: Most people want to build the best products they can and not have to worry about rework or field failures because an operator was incorrectly using the SPI.
Welch: Yes, but as Nolan was saying, some people have a different objective or performance goals to meet, so even though the engineers might want to make improvements, sometimes they’re held back because the line production doesn’t give them the time. The engineers need to be given the time and line availability to identify issues and opportunities for improvement and then implement the necessary actions. Right now, the biggest thing I see is management often wants to get down to one operator per line and no engineers on the line. That’s not going to work very well when your process isn’t robust—a hands-off process—and none of them are there right now.
To read this entire interview, which appeared in the May 2020 issue of SMT007 Magazine, click here.
Suggested Items
Indium Corporation, Industry Partners to Showcase Products “Live@APEX”
03/26/2024 | Indium CorporationIndium Corporation®, in cooperation with its industry partners, will feature its proven solder solutions live on the show floor throughout IPC APEX Expo from Apr. 9‒11 in Anaheim, Calif., U.S.
ITW EAE Wins New Product Introduction Award for Electrovert® Wave Soldering Machine Deep Wave
03/26/2024 | ITW EAEITW EAE is proud to announce that it has earned a 2024 New Product Introduction (NPI) Award for Electrovert’s Deep Wave option for wave soldering machines. This new, innovative system provides the ability to pump up to a 20 mm wave height.
Mek's Next-Gen AOI Technology Takes Center Stage at IPC APEX EXPO 2024
03/19/2024 | MEKMek is excited to announce its presence at IPC APEX EXPO, North America's largest electronics manufacturing event, in Anaheim, California, from April 6-11, 2024. Attendees are invited to visit Mek at booth #1433 to explore the latest AOI technology offerings.
Nihon Superior Sets New Standards in Lead-Free Soldering Technology at APEX 2024
03/13/2024 | PVANihon Superior Co. Ltd., an advanced joining material supplier, will exhibit in Booth 1325 during the 2024 IPC APEX EXPO, scheduled to take place April 9-11, 2024 at the Anaheim Convention Center in California.
Apollo Seiko Presents the Next Frontier in Non-Contact Soldering at 2024 IPC APEX EXPO
03/12/2024 | Apollo SeikoApollo Seiko, a leading innovator in soldering technology, is pleased to announce plans to showcase its latest advancements at Booth 1408 during the 2024 IPC APEX EXPO, taking place April 9-11, 2024 at the Anaheim Convention Center in California.