PCB Technologies Expands Capabilities

Reading time ( words)

Nolan Johnson speaks with Arik Einhorn and Yaad Eliya of Israel-based PCB Technologies about how they’ve increased their capabilities down to 1 mil line and space to better support their customers from the military, aerospace, and medical markets. 

Nolan Johnson: Arik, let’s start by talking about the new 1-mil capabilities and how you got there. What was the trigger for PCB Technologies to decide to go to 1 mil? And what sort of resources did you have to invest?

Arik Einhorn: PCB Technologies’ goal is to be in front of the technology. Two years ago, we started to build our five-year technological roadmap and for that purpose, we put together a committee of market representatives, assembled from several of our high-end customers' R&D and innovation executives. We had representation for military, medical, communication and other markets and for different applications within these markets. We asked them: “What do you need that you currently don’t get?" And "what will you need down the road?” Our CTO, Yaad, was head of this discussion.

We have mapped the trends, the applications, where they want to be, what will help them better the performance of their products. From this, we got a wish list. The next thing was for Yaad and his team to translate the wish list into a roadmap and a good solid plan of how to get there—machinery, people, chemistries and processes, materials, functions, training. This 1-mil line/space, was one part of the complete roadmap, as we saw it popped up over and over again in many of the line items in the wish list.

Yaad Eliya: Across the roadmap, we saw a few motivations for miniaturization. When it comes to making things smaller, we always start with shrinking the line and space resolution. Then we deal with the diameter or the geometries of the via, lowering the dielectric thickness, lowering the copper thickness, etc.; that is our process for miniaturization. Generally speaking, more and more customers need to miniaturize their products and one of their constraints is the size of the electronics. A number of technologies and industries were developed in the last 10 to 15 years to "bridge the gaps" between the die, the chip, and the semiconductor and the PCB itself. When you think about it, the semiconductor industry follows Moore's law, making things smaller at an exponential pace whilst leaving the PCB behind. The first solution for this gap was the creation of the IC/substrates industry that took some processes from the semiconductors combined with processes and materials from the PCB production.


What we figured out is that we can save many headaches for our customers by creating 1-mil line and space, and by that, simplify the design of the system along with promoting its miniaturization. For example, smaller sensors can help medical companies that work with us—especially ones that produce systems for surgery and other invasive devices; most of them are using FPC (ultra-flex PCB) which they design with us and buy from us. We also found out that the aerospace industry wants miniaturization to reduce the loss of signals in dB per mil. As long as the line and space is smaller and fine-shaped, then the loss will be lower. We understood that this 1-mil line/space capability will allow us not only to support customers who want to minimize their product, whether it’s in aerospace, medical, or military, but also improve the performance of their systems.

Johnson: As you made your roadmap, undoubtedly you found gaps between what you can do now and what you needed to achieve to be able to fulfill your customers’ requests. How did you invest? Was it equipment, staffing, facilities?

Eliya: Yes. First, it’s very easy to buy an off-the-shelf machine that was designed to make a particular product. It is more complicated when you need the machinery and processes that match the full range of your products, your R&D activity, plus future products. We already invested two, three years ago in a very special etching and developer system to create the dense and fine line. Our next gap was the lithography process, and without getting into everything we did to close this gap, I will say that we purchased an LDI with the wavelength to create 18 microns line and space. And when, in the future, customers will want a 20-micron line and space, it’s achievable. In fact, we are already running a product with 20-micron lines with this machinery.

To read this entire interview, which appeared in the April 2021 issue of PCB007 Magazine, click here.



Suggested Items

Benchmarking Your Process Engineering

04/29/2021 | I-Connect007 Editorial Team
Mark Thompson has been in bare board fabrication for over 30 years. He is now laying out printed circuit boards at Monsoon Solutions, a high-tech design bureau near Seattle, Washington. With Mark’s extensive hands-on knowledge of PCB manufacturing, he brings a unique perspective to PCB design. In this discussion with the I-Connect007 editorial team, Mark shares what’s important from a process engineer’s point of view, and how to stay on top of evaluating and benchmarking your manufacturing process, along with insights from his new role as a designer.

Isola Releases IS550H Material

04/26/2021 | Nolan Johnson, I-Connect007
Nolan Johnson speaks with Michael Gay of Isola and Chris Hunrath of Insulectro about the release of their new halogen-free, high-thermal reliability material, which they hope fills the gap in the market between epoxies and polyimides.

EIPC Technical Snapshot: Supply Chain and Material Price Pressures

04/26/2021 | Pete Starkey, I-Connect007
EIPC’s seventh Technical Snapshot webinar on April 14 was timely and appropriate. In the context of current supply chain issues and material price pressures facing the PCB industry, particularly in Europe, the EIPC team brought together an outstanding group of experts—each a leading authority in his field—to analyse and comment upon the areas of concern and to respond to questions raised by a capacity audience. As Alun Morgan said, “If you don’t use the European supply chain, you won’t have it anymore!”

Copyright © 2021 I-Connect007. All rights reserved.