New Desmear Line from TSK Schill GmbH in Operation at Hofstetter PCB AG


Reading time ( words)

TSK supplies its long-standing and highly valued customer with a new horizontal chemical wet process machine.

TSK Schill GmbH continues to make progress in wet process machine engineering. Their long-time customer Hofstetter PCB AG in Switzerland invests in a new Desmear line, after the old line had now unfortunately become outdated. The exceptionally good cooperation between Hofstetter and TSK made the project a success, and now that commissioning has been completed, the customer is ready for the future.

"We are very proud to have implemented a very important project with the new Desmear line for Hofstetter PCB in this time and are looking forward to support also in future requests," says Sales Manager Marc Aicheler. 

Share

Print


Suggested Items

Driving Down Cost with Process Engineering

04/20/2021 | I-Connect007 Editorial Team
Nolan Johnson, Barry Matties, and Happy Holden speak with Matt Mack, process engineer at ICM Controls. Matt shares a day in the life of a process engineer, along with how he approaches continuous improvement and planning for the future on the floor.

PCB Sourcing Using PCQR2

03/30/2021 | Al Block, Naji Norder, and Chris Joran, National Instruments
In a global market, it is often difficult to determine the best PCB suppliers for your technology needs, while also achieving the lowest costs for your products. Considering each PCB supplier has their own niche in terms of equipment, process, and performance, uniform test data from the IPC-9151D Process Capability, Quality, and Relative Reliability (PCQR2) Benchmark Test Standard can help find the right source for the board based on its specific technology requirements.

IPC APEX EXPO 2021 Keynote: Travis Hessman on ‘The Great Digital Transformation’

03/10/2021 | Pete Starkey, I-Connect007
Wednesday’s Premier Keynote at IPC APEX EXPO 2021 came from Travis Hessman, editor-in-chief of IndustryWeek, “a website and magazine dedicated to manufacturing leadership, operational excellence and the technologies that make it possible.” An energetic and animated presenter, a powerful storyteller and visibly passionate about digital manufacturing, Hessman made it clear at the outset that his goal was not to hype an already over-hyped industry, nor to focus on the technologies themselves, but to walk-through the process of transformation.



Copyright © 2021 I-Connect007. All rights reserved.