Altix Receives New Order for AcuReel XL Imaging System


Reading time ( words)

Altix is thrilled to receive its first order of its AcuReel XL from a major European FPC manufacturer. Dedicated to all FPC processes with an exposure area up to 500 x 1500mm, the AcuReel XL is the ideal contact exposure solution for automotive-related FPC production and other markets requesting extra-large imaging formats.

Alexis Guilbert, product manager, reveals more about the machine’s attributes: “With the production of EVs becoming mainstream, the need for high-density FPCBs is rising. From dashboard control systems to battery management systems (BMS), the automotive sector is driving innovation in imaging. A BMS not only monitors the batteries’ status but also optimizes the use of the battery cells – and this is where FPCs come into play by connecting individual cells’ sensors to the BMS. Overall, we are very proud that Altix is completely ready to satisfy this emerging market with both the AcuReel contact printers and Adix RtR direct imaging machines.

Share

Print


Suggested Items

A Conversation with Canice Chung, TTM Technologies

12/09/2014 | Barry Matties, I-Connect007
We had the opportunity to sit down with Canice Chung, Executive Vice President of TTM Technologies, Inc. to discuss the current trends and challenges of PCB Manufacturing in China.

A Conversation with Laurent Nicolet, Schmid Group

12/07/2014 | Barry Matties, I-Connect007
During the HKPCA & IPC Show 2014, Laurent Nicolet, VP - PCB Business Unit of Schmid Group took a few minutes to discuss the automation technology that was on display and share the changes he's seen in the China market.

Thin PCBs for Smart Phones: Technology and Reliability Considerations

11/19/2014 |
The next generation of smartphones will demand very thin multilayer boards to reduce product thickness. This paper shows three different manufacturing approaches which can be used for very thin, any-layer build-ups. The technological approaches are compared on reliability level--the any-layer copper filled microvia technology which is to be considered state-of-the-art for high-end phones and the ALIVH-C/G technology well established in Japan.



Copyright © 2021 I-Connect007. All rights reserved.