GUC Optimizes Quality of Results and Accelerates Time to Tapeout Using the Cadence Digital Full Flow
December 8, 2021 | Cadence Design SystemsEstimated reading time: 1 minute
Cadence Design Systems, Inc. announced Global Unichip Corporation (GUC) used the Cadence digital full flow to accelerate the time to tapeout of its ASIC designs for mobile, automotive, AI and hyperscale computing applications. By leveraging the Cadence Innovus™ Implementation System’s mixed-placer automation technology, GUC successfully reduced floorplan design time from weeks to days and achieved more than 10% reduced wirelength and 5% better switching power.
GUC has been using the Cadence digital full flow for many years to tape out the most challenging ASIC designs down to the latest 5nm and 3nm process nodes. As a leading global ASIC provider, delivering the best power, performance and area (PPA) results within ever more demanding schedules is critical for success.
As ASIC designs grow in size and complexity, the number of macros in a floorplan also increases rapidly, making GUC’s traditional manual and iterative floorplanning process a lengthy part of the implementation schedule. Using the Innovus mixed-placer technology, the GUC team can handle the placement of both standard cells and macros concurrently, automating the floorplanning process to achieve greater efficiency and faster PPA analysis.
“As our ASIC customer designs move to the latest process nodes and grow in size and complexity, GUC is always making strategic investments in the latest technologies that ensure we can meet and exceed customer requirements for optimal PPA,” said Louis Lin, senior vice president at GUC. “Cadence’s Innovus mixed-placer technology enabled us to make a significant productivity breakthrough, so that we could complete customer designs more efficiently and accelerate tapeout. The Innovus mixed-placer technology is now a key part of our GUC production implementation flow, providing many tapeout successes, and we use it for the majority of our designs.”
Suggested Items
Boeing Opens Research & Technology Center in Japan
04/23/2024 | BoeingBoeing today opened a Boeing Research & Technology (BR&T) Center in Japan that will focus on innovation to enable the commercial aviation industry meet its goal of net zero carbon emissions by 2050.
Schweizer Electronic Appoints Thomas Gottwald as New Member of the Executive Board
04/23/2024 | Schweizer Electronic AGThe Supervisory Board of Schweizer Electronic AG has appointed Mr. Thomas Gottwald to the Executive Board as CTO (Chief Technology Officer) for a period of 3 years with effect from 1 May 2024.
US Department of Defense Selects Intel Foundry for Phase Three of RAMP-C
04/23/2024 | IntelThe U.S. Department of Defense (DoD) has awarded Intel Foundry Phase Three of its Rapid Assured Microelectronics Prototypes - Commercial (RAMP-C) program.
Real Time with... IPC APEX EXPO 2024: Industrial Quality Solutions from Zeiss
04/23/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson and Herminso Gomez of Zeiss Group discuss the company's industrial quality solutions, with a focus on X-ray technology. Zeiss provides a range of microscopy options and Herminso highlights the advantages of X-ray technology for aerospace, medical, and consumer electronics sectors.
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.