Ansys, Innoviz Technologies Enable Autonomous Driving Revolution with Next-Gen LiDAR Design
January 6, 2022 | ANSYSEstimated reading time: 2 minutes
Innoviz Technologies is using Ansys simulation solutions to successfully drive the technology behind their unique automotive-grade LiDAR sensor and achieve autonomy for their customers—while reducing development time and costs. Ansys enables Innoviz Technologies to meet their customers’ objectives for durability, reliability, and affordability in a LiDAR design that is seamlessly integrable into Level 3-5 autonomous vehicles.
A study from the U.S. Department of Transportation’s National Highway Traffic Safety Administration found the majority of serious crashes are caused by human error, a statistic that is incentivizing autonomous vehicle development to improve safety on the road. Autonomous vehicles depend on the sensing capability of various components, including LiDARs, radars and cameras. LiDAR delivers the high-resolution, long-range 3D image perception needed to safely guide vehicle movement. The challenge for automotive manufacturers is that available LiDARs are not close to meeting industry standards for performance, size, reliability, and cost perception. Packaging these very complex optical sensor technologies tied to numerous systems presents challenges in both their production and operation.
The success of the team depended on simulation and testing of various aspects of LiDAR design and optics. Drawing on the power of Ansys multiphysics capabilities, Innoviz relied on Ansys® Mechanical™, Ansys® Fluent®, Zemax and Ansys® Maxwell® simulation software, working seamlessly together to successfully address LiDAR system complexity. Through extensive simulation and testing, an extreme integration of components into a single chip was accomplished requiring minimal design iterations and enabling a more compact LiDAR system. This high-performance, reliable LiDAR solution meets the necessary automotive performance characteristics and size requirements manufacturers are looking for at a much lower price point.
“We use many types of simulations in the Ansys ecosystem across the entire design chain of our product,” said Oren Buskila, chief R&D officer and co-founder at Innoviz. “We rely on Ansys capabilities to run structural analysis to understand the stresses and temperature variations of our chips. We also use Ansys for dynamic simulation to understand vibration characteristics, and thermal simulation to see if we can dissipate the amount of power from the main components inside, like the laser. Ansys provides excellent simulation software and we value their experience in the automotive space to help us solve our biggest design challenges.”
“Our vast simulation and growing multiphysics capabilities support exploration and discovery in advanced autonomous technologies,” said Shane Emswiler, senior vice president of products at Ansys. “More complex optical applications like LiDARs require a higher degree of predictive accuracy in their execution. Our tools interface well, both inside and outside our product portfolio, to help our customers quickly move through design cycles with confidence. Simulation software is a game changer in the development of a new generation of more complex LiDAR systems that will accelerate autonomous vehicle adoption.”
Suggested Items
iNEMI Packaging Tech Topic Series: Role of EDA in Advanced Semiconductor Packaging
04/26/2024 | iNEMIAdvanced semiconductor packaging with heterogenous integration has made on-package integration of multiple chips a crucial part of finding alternatives to transistor scaling. Historically, EDA tools for front-end and back-end design have evolved separately; however, design complexity and the increased number of die-to-die or die-to-substrate interconnections has led to the need for EDA tools that can support integration of overall design planning, implementation, and system analysis in a single cockpit.
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Ansys, TSMC Enable a Multiphysics Platform for Optics and Photonics, Addressing Needs of AI, HPC Silicon Systems
04/25/2024 | PRNewswireAnsys announced a collaboration with TSMC on multiphysics software for TSMC's Compact Universal Photonic Engines (COUPE). COUPE is a cutting-edge Silicon Photonics (SiPh) integration system and Co-Packaged Optics platform that mitigates coupling loss while significantly accelerating chip-to-chip and machine-to-machine communication.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.