-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
PCB Plating Still Comes Down to Physics
June 21, 2022 | I-Connect007 Editorial TeamEstimated reading time: 3 minutes
For this month’s plating issue, we spoke with I-Connect007 columnist Michael Carano, a longtime surface finish expert with years of experience at RBP Chemical and OM Group. We asked Michael to discuss the latest innovations in plating equipment and chemicals, as well as some of the drivers in this segment, and the biggest challenges and opportunities he sees in plating today.
As Michael points out, despite all of the technological advances in this industry, process engineers still need a solid understanding of Faraday’s Law and Ohm’s Law to successfully plate PCBs.
Andy Shaughnessy: This is our electroplating issue, and I’ve heard you say that you know how to plate anything. What's the latest in electroplating? What sort of innovations and challenges are you seeing in processes, equipment, etc.?
Michael Carano: If you go back 30 years, what's different in electroplating technology? Forget about electrodes for now. What's different about electroplating technology? I like to call it electrodeposition because we are attaching electrodes and we're running current through a tank. In the last 10–15 years, it hasn't changed much. But what has changed is the technology of the circuit board—smaller vias and thicker boards. Whenever you make a via smaller and you add more layers, what you do is you increase what they call the ohmic resistance through the via.
With Ohm's Law, V = IR; you apply a voltage to a plating tank. If you have a 10:1 aspect ratio board and a 20:1 aspect ratio board, which one is going to be more difficult to plate? Very simple: the 20:1, because the resistance increases significantly down through the hole. From a technology standpoint, you've got to make several adjustments, which the industry has. We’ve seen adjustments in tank design, plating rack design, process control, and the formulation of new additives that enhances throwing power and overall plating distribution.
It's always funny when someone says, "Why can't we just do this?" Well, you're violating Faraday's Law. There are only so many things you can do and you can't violate certain laws of the universe. Faraday's Law is one that you don't mess with. So you've got to manipulate the amperage, the voltage, and all the things that make a difference in getting chemistry into the hole.
That's significant. Then we went to periodic reverse pulse plating, which is basically electroplating except it uses a reverse current as well as a forward current. It makes adjustments in the wave shape using square wave vs. more turbulent type waves. That has helped tremendously to plate and improve the reliability of the thicker through-hole printed circuit boards.
Finally, one of the things that was borrowed from the semiconductor industry—we've all talked about what's new because sometimes it's not new, it's just re-cloaked in a new technology—is they learned to plate copper in narrow trenches. They call it damascene plating; they actually fill a trench with electroplated copper. Of course, the trenches are very minute compared to a blind via of a circuit board, but the circuit board industry and the suppliers, in my experiences, have been able to adapt to chemistry and, again, the agitation and other adjustments, to fill blind vias by electroplating copper in a via from what's called bottom-up filling, super fill, without necessarily overplating on the top. That has helped create HDI and ultra-HDI and allowed that technology to really blossom.
How do you fill blind vias when you're not going to put a component in them? You need to fill them with something. It's like the saying: A man digs a hole, and then he wants to fill it. Well, you must fill the hole in a blind via because you can't have air in a blind via if you're not going to put components in it.
To read this entire conversation, which appeared in the June 2022 issue of PCB007 Magazine, click here.
Suggested Items
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources: