Understanding the Typical CAM Process


Reading time ( words)

CAM vs. Capability

Many new customers have some misconceptions about what a typical fab shop can and cannot do. There are levels of manufacturing that need to be well understood by the buyer. The PCB buyer needs to know where a board will be a good fit based on the parts’ complexity. How does this happen? How does the PCB buyer or a contract manufacturer know who is (or is not) a good fit based on a myriad of different designs, from simple 2 to 4 layer RF parts to high-layer count HDI, blind and buried via parts? If the part is of medium complexity, it can be built by virtually any mid to higher level PCB fabricator. Many times it boils down to things like quote response time. More diligent buyers may use a tool such as The PCB List where they can compare technology levels side-by-side and make good decisions about where a part should go. Not all PCB buyers need a shop that can do 2 mil lines and spaces or laser stacked vias. Sometimes the product dictates a shop of this type must be used; other times, when a given design does not “push” the fabricator’s limits, more fabricators obviously have an opportunity to show what they can do.

What is CAM?

Not all board fabricators have the ability to have both CAD and CAM. You may say to yourself, “But a CAM tool should be able to do some, if not all, CAD functions,” and that is true; but if you are really getting to the design level, you need to have a design team. Many PCB fabricators do not have design capabilities but do have the ability to understand the customers’ needs and recognize design attributes.

Let me give you some examples of this from simple CAM assumptions to more complex ones. Let’s say a design has copper poured right to the edge of the part, but is NOT a Z-axis or edge-plated part. A good CAM department may do a very minimal clip of the metal around the periphery like 0.003 to 0.004”. This is imperceptible to the end user as it appears metal is right to the edge and if the metal would have been left alone there may be burring at final rout (functional, but not cosmetically the best ). Again, this is where a good CAM person comes into play: When would they NOT do something like a minimal clip for rout? RF launches on an obvious RF part; here, we know the intention is to literally have metal right to the edge and that any burring at final rout is acceptable with the customer. This is where their understanding of electrical function comes in as well, plus years of practical experience.

Read the full column here.


Editor's Note: This column originally appeared in the February 2014 issue of The PCB Magazine.

Share

Print


Suggested Items

Benchmarking Your Process Engineering

04/29/2021 | I-Connect007 Editorial Team
Mark Thompson has been in bare board fabrication for over 30 years. He is now laying out printed circuit boards at Monsoon Solutions, a high-tech design bureau near Seattle, Washington. With Mark’s extensive hands-on knowledge of PCB manufacturing, he brings a unique perspective to PCB design. In this discussion with the I-Connect007 editorial team, Mark shares what’s important from a process engineer’s point of view, and how to stay on top of evaluating and benchmarking your manufacturing process, along with insights from his new role as a designer.

Isola Releases IS550H Material

04/26/2021 | Nolan Johnson, I-Connect007
Nolan Johnson speaks with Michael Gay of Isola and Chris Hunrath of Insulectro about the release of their new halogen-free, high-thermal reliability material, which they hope fills the gap in the market between epoxies and polyimides.

EIPC Technical Snapshot: Supply Chain and Material Price Pressures

04/26/2021 | Pete Starkey, I-Connect007
EIPC’s seventh Technical Snapshot webinar on April 14 was timely and appropriate. In the context of current supply chain issues and material price pressures facing the PCB industry, particularly in Europe, the EIPC team brought together an outstanding group of experts—each a leading authority in his field—to analyse and comment upon the areas of concern and to respond to questions raised by a capacity audience. As Alun Morgan said, “If you don’t use the European supply chain, you won’t have it anymore!”



Copyright © 2021 I-Connect007. All rights reserved.