Fourth Series of IPC Standards Committee Reports


Reading time ( words)

These standards committee reports from IPC APEX EXPO 2015 have been compiled to help keep you up to date on IPC standards committee activities. This is the fourth and final in the series of reports.

Data Generation and Transfer

The 2-16 Product Data Description (Laminar View) Subcommittee continued discussion of potential new requirements and possible changes to IPC-2581B, Generic Requirements for Printed Board Assembly Products Manufacturing Description Data and Transfer Methodology. The group continues to work on development of user guides that show designers how to implement 2581 concepts in their transfer between design and manufacturing.

Supplier Declaration

The 2-18 Supplier Declaration Subcommittee did not meet due to conflicts in the chair’s schedule.

The 2-18b Materials Declaration Task Group discussed further enhancements to IPC-1752A Materials Declaration Management. The task group continues to work in concert with the IEC 62474 Materials Declaration Standards Group to ensure harmonization of the standards. The task group is in the process of organizing the annual solution provider review.

The 2-18j Laboratory Declaration Task Group is now looking at the next revisions of IPC-1753, Laboratory Report Declaration Standard. The standard allows for laboratory data to be seamlessly exchanged among supply chain partners.

Electronic Documentation Technology

The 2-40 Electronic Documentation Technology Committee and 2-41 Product Data Description Subcommittee discussed the IPC-261X series. Discussion included modifications to IPC-2611, Generic Requirements for Electronic Product Documentation, IPC-2612, Sectional Requirements for Electronic Diagramming Documentation and IPC-2612-1, Sectional Requirements for Electronic Diagramming Symbol Generation Methodology, as well as IPC-2614, Sectional Requirements for Board Fabrication Documentation.

Environment, Health, and Safety

The 4-30 Environmental, Health, and Safety Committee heard presentations and discussed several EHS issues impacting the electronics industry. The committee will help write the EHS section of the 2015-2016 IPC Roadmap. A presentation on the EICC Code of Conduct sparked good debate and discussion on what requirements may be seen in the future. IPC staff gave an update on their advocacy efforts on substance restrictions, both nationally and internationally. The presentations are available to IPC Members at www.ipc.org/ehs.

The 4-32 Equipment Safety Subcommittee discussed the continued efforts to develop a joint equipment safety standard with SEMI. Committee members present at the meeting discussed the need to move forward with a draft standard.

The 4-33 Halogen Free Laminate Materials Subcommittee was re-activated to try to provide both technical as well as financial information that helps prove the case of why tetrabrominated bis-phenol A should not be restricted any further as a flame retardant for printed board laminate.

The 4-34b Marking, Symbols and Labels for Identification of Assemblies, Components & Devices Task Group reviewed updates needed on J-STD-609A, IPC/JEDEC Marking and Labeling of Components, PCBs and PCBAs to Identify Lead (Pb), Lead-Free (Pb-Free) and Other Attributes, including adding references to the recast RoHS Directive and clarification that markings under this standard do not denote EU RoHS compliance or any other regional substance restriction legislation addressing lead content. The standard was intended to label PCB surface finishes, component terminal finishes, and attachment solders, as opposed to the lead used internal to the component.

Management

The 8-41 Technology Roadmap Subcommittee celebrated the publication of the 2015 IPC International Technology Roadmap for Electronic Interconnections. The roadmap represents two years of work by an international team and provides the vision and needs assessments of OEM, ODM, and EMS companies between now and 2015. In addition to discussing the newly published roadmap, the subcommittee also gathered comments on areas of improvement or need for the 2017 edition.

Intellectual Property

The E-21EMS Intellectual Property Subcommittee met to discuss the working draft version of IPC-1072, Intellectual Property Protection in Printed Board Manufacturing. Following the meeting, the document was to be distributed as a draft for industry review to generate feedback from industry and prepare a ballot document. The goal is to ballot the document by June and publish in fall or winter 2015. Changes made to this standard may be reflected in an amendment to IPC-1071A.

Share

Print


Suggested Items

EIPC Technical Snapshot: Supply Chain and Material Price Pressures

04/26/2021 | Pete Starkey, I-Connect007
EIPC’s seventh Technical Snapshot webinar on April 14 was timely and appropriate. In the context of current supply chain issues and material price pressures facing the PCB industry, particularly in Europe, the EIPC team brought together an outstanding group of experts—each a leading authority in his field—to analyse and comment upon the areas of concern and to respond to questions raised by a capacity audience. As Alun Morgan said, “If you don’t use the European supply chain, you won’t have it anymore!”

Time, Space, Structure, and Model Analysis of CCL Price Increase

04/19/2021 | Hu Yang, Zhongtai Securities Research Center
According to the CCL Association, copper foil accounts for the largest proportion of raw materials (traditional CCL uses epoxy resin, glass fiber cloth and copper as raw materials). Copper foil in thin plate accounts for about 30% of the overall cost; in thick plate copper accounts for 50%. In CCL production, using Shengyi Technology and Chaohua Technology as examples, the cost of raw materials accounts for about 88% of the total cost, with labor accounting for about 4%. Other costs such as equipment depreciation account for about 8%.

Top Five Takeaways from IPC APEX EXPO 2021

04/15/2021 | Chris Mitchell, IPC VP, Global Government Relations
IPC APEX EXPO 2021, which went all virtual this year, exemplified how the electronics industry has responded to the COVID-19 global pandemic: with resiliency, agility, and an unwavering commitment to build electronics better. APEX EXPO featured great content and robust discussions on topics of critical importance to the global electronics industry. From my vantage point leading IPC’s government relations programs, here are my top five takeaways from this year’s event.



Copyright © 2021 I-Connect007. All rights reserved.