atg Luther & Maelzer to Exhibit at IPC APEX EXPO 2016

Reading time ( words)

atg Luther & Maelzer will exhibit its fully automated flying probe system at the upcoming IPC APEX EXPO 2016 exhibition, which will be held from March 15–17, 2016, at the Las Vegas Convention Center in Nevada. The company will be at Booth 218.

At IPC APEX EXPO, atg Luther & Maelzer will showcase its bestselling automatic flying probe system: The A7 - Automation (A7a), which combines advanced levels of automation with highest flexibility for handling shipment panels, as well as big production panels.

The A7a meets the customer demand for full automation and lights-out operation including processing of different part numbers and product sizes. It has the capability of handling production panels up to 25” x 21” (635 mm x 535 mm) with an active test area of 24” x 20” (610 mm x 510 mm). The A7a features 8 high-speed carbon fiber test heads in combination with 4 high resolution color cameras. Besides final products, the system can be equipped with tension clamps for testing production panels down to 16 mil (0.4 mm) thickness. The high-speed A7a performs up to 125 measurements per second, depending on the product under test and test method used, on pad sizes as small as 1.3 mil.

For more information, meet company representatives at the show or click here.

About atg Luther & Maelzer

With more than 150 employees worldwide, atg Luther & Maelzer is the leading supplier of electrical testing solutions for the Printed Circuit Board industry. atg Luther & Maelzer offers two product lines:  flying probe and universal grid testers.

atg Luther & Maelzer is a company of Xcerra™ Corporation, which provides capital equipment, interface products, and services to the semiconductor, industrial, and electronics manufacturing industries. Xcerra Corporation offers a comprehensive portfolio of solutions and technologies, and a global network of strategically deployed applications and support resources. 


IPC APEX EXPO 2015 is a five-day event in the printed circuit board and electronics manufacturing industry. The international event features a Technical Conference, an Exhibition, and Professional Development, Standards Development and Certification programs. These activities offer professional education and networking opportunities. To learn more about IPC APEX Expo, please click here.



Suggested Items

Happy Holden Book Excerpt: CIM & Automation Strategy

05/22/2020 | Happy Holden, I-Connect007
The following is an excerpt from Chapter 1 of Happy Holden’s I-Connect007 eBook Automation and Advanced Procedures in PCB Fabrication. In this book, Happy explains fabrication automation with illustrative examples and anecdotes from his decades as a mechanization leader.

The Smart Factory: All the Bits and Bobs

03/26/2020 | Happy Holden, I-Connect007
“Smart factory” is another phrase that describes Industry 4.0 programs. These programs seem to have replaced CIM and CAM, but it did not make them obsolete. While these topics are getting a lot of press, there is nothing new about them. We have been on a journey to automate manufacturing since the mid-‘70s. What has evolved are faster and cheaper computers, and more complex and integrated networking.

Alex Stepinski: GreenSource Fabrication Update

01/22/2020 | Barry Matties, I-Connect007
Alex Stepinski gives an update on GreenSource, their acquisition of AWP, and their move to full production after some delays. Barry Matties and Alex also discuss automation and the difficulties in hiring in the U.S. and announces the decision to go to market with their recycling equipment in 2020.

Copyright © 2021 I-Connect007. All rights reserved.