-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueAdditive Manufacturing
In this month’s issue, we explore additive manufacturing technology for the PCB fabricator: where it stands today, the true benefits, and where it seems to be headed.
The Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Estimated reading time: 1 minute
Contact Columnist Form
Trouble in Your Tank: Via Formation and Drilling Mechanics, Part 1
Introduction
In the extensive process of printed circuit board fabrication, one of the steps involves mechanically drilling through-hole vias. Via formation is then followed by desmear and metallization. The quality of the through-hole drilling process (and by inference the quality of the drilled through-hole) or lack thereof will also impact the desmear and metalization processes. While drilling equipment, tools and methods have been continually improved over the years, the fabricator must adhere to strict guidelines with respect to maintenance of the equipment, quality of the drill bits, the drilling operation parameters as well as the proper selection and use of entry and back-up materials. When simple maintenance of drill equipment and drill bits is lacking, drilled hole wall quality deteriorates. This then leads to defects in the PTH that are not attributable to the plating processes such as electroless copper. However, for this month’s edition of “Trouble in Your Tank,” I will present some of the basics of drilling.
Drilling Basics
Through-holes are formed by the cutting action of drill bits in numerically-controlled drilling machines. Figure 1 shows a five-head drilling machine. There are multiple factors to consider when mechanically drilling plated through-holes as well as blind and buried vias (assuming mechanical drilling will be used on a few applications for blind/buried vias). These include the drill machine, drill bits, entry and back-up materials, drilling parameters, stack heights, etc. In addition, the type of resin that makes up the circuit board, along with glass weave style and content, will play a role in via drilling quality. This will be the subject of a future column of “Trouble in Your Tank.”
To read this entire article, which appeared in the November 2016 issue of The PCB Magazine, click here.
More Columns from Trouble in Your Tank
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5Trouble in Your Tank: Electrodeposition of Copper, Part 6
Trouble in Your Tank: Electrolytic Copper Plating, Part 5
Trouble in Your Tank: Processes to Support IC Substrates and Advanced Packaging, Part 4
Trouble in Your Tank: Processes to Support IC Substrates and Advanced Packaging, Part 3
Trouble in Your Tank: Electrodeposition of Copper, Part 4—Addition Agents
Trouble in Your Tank: Lead-free and the Fabrication Challenge, Part 1
Trouble in Your Tank: Processes to Support IC Substrates and Advanced Packaging, Part 2