-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Laser Focus on Flex and Rigid-flex
January 28, 2019 | Barry Matties, I-Connect007Estimated reading time: 7 minutes
Noel: As we’ve said, yield is always a consideration. You have to be able to produce parts at a profit. We’ve had experiences even in the past few years where customers, OEMs, and producers have had to come to ESI for a solution where they thought they had another route to go, but were experiencing low yields in production. Again, with ESI’s laser material expertise, we’ve been able to help solve a lot of those problems.
Matties: When those types of customers come to you, what challenges do they face that they couldn’t solve? What was the problem?
Noel: It was the introduction of some of these 5G material sets. When utilizing traditional flex manufacturing processes that require high-temperature lamination, these new materials have a different glass transition temperature and also react differently to the other processing steps. That has led to yield loss. We’ve seen vias move out of pads and things like that. Being able to provide a solution to a customer that we can ensure them is an easier or more reliable process to do has been able to help solve those problems.
Matties: It goes right back to what you said about starting with collaboration up front. This is a great example of where that problem could have been avoided completely.
Noel: Absolutely. To be frank, we had already done the prework with some of these customers beforehand. It was an alternative process step that was readily available.
Ryder: I want to mention the base material manufacturers in this picture as well. ESI has always been close to the base material manufacturing world, and we continue to do so. We have constant discussions with the main material manufacturers so that when they introduce new materials, the process and the needs for the processability of the material is discussed. A perfect solution may not always be possible. The materials fit a certain performance that the OEMs need, but we do make it a point to be a part of that discussion with the material manufacturers.
Matties: Is there anything that we haven’t discussed that you feel we should include for the system designers?
Noel: One thing that ESI has been seeing is a continual press for increasingly smaller via sizes. When I started in flex 15 years ago, 100 microns was pretty standard. Now, we have customers pushing well below 40 microns. That’s a challenge for us and the customer not only for laser drilling but also for downstream and upstream processing. As we explore these smaller and smaller feature sizes, we need to evolve with the industry and provide solutions to that. That’s a big one.
Plate-ability is always a question. Again, compensating for upstream and downstream processes by utilizing a laser process that gives you the desired results is vital. ESI’s understanding of those processes is again a great part of our success and our customers’ success as well.
Ryder: I think that as the cost per photon decreases, we see laser-based manufacturing as a great opportunity for some of the new products coming on the market. We’d love to work closely with the industry and customers’ supply base to make that happen. We’re proud to be a part of it.
Matties: Thank you both for being here to share your thoughts, gentlemen.
Ryder: Thank you, Barry.
Noel: Thank you.
Page 2 of 2Suggested Items
The Chemical Connection: Reducing Etch System Water Usage, Part 2
05/02/2024 | Don Ball -- Column: The Chemical ConnectionIn my last column, I reviewed some relatively simple ways to reduce water usage in existing etch systems: cutting down cooling coil water flow, adding chillers to replace plant water for cooling, lowering flow rate nozzles for rinses, etc. This month, I’ll continue with more ways to control water usage in your etcher. Most of these are not easily retrofittable to existing equipment but should be given serious consideration when new equipment is contemplated. With the right combination of add-ons, it is possible to bring the amount of water used in an etch system to almost zero.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.