-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Chapter 1 Excerpt: The Printed Circuit Assembler’s Guide to Process Validation
December 31, 2020 | Graham Naisbitt, Gen3 SystemsEstimated reading time: 2 minutes
Quick and Convenient Contamination Testing
The original principle underlying the IPC’s ionic cleanliness requirement was that the mobility of surface ions, detectable from SIR measurements, would correlate to a maximum value of detectable ionic elements permissible on the circuit surface.
The industry required a test that was both fast and accurate for process control. Thus, a simplified ion chromatograph that was able to detect ionic elements without differentiation was created. Due to patent restrictions, there were—and still are—only two different instrument configurations: closed-loop and open-loop, which became referred to as static and dynamic instruments. Each instrument configuration must be capable of measuring the presence of a known amount of ionic contamination.
Based on an extrapolation of insulation resistance measurements, it was determined that there was an upper limit beyond which ionic elements would become mobile on the assembly surface, thereby potentially compromising electrochemical reliability. The number, although occasionally altered during the infancy of this test, was 1.56 µg/cm² NaCl equivalence. Despite the many technology changes employed in the period after the mid-1970s, many—if not most—felt it convenient to simply continue applying this rule as adequate evidence of the electrochemical reliability of their end-product.
The IPC has now withdrawn the requirement for 1.56 µg/cm² NaCl equivalence for a number of reasons as explained in IPC-WP-019A, which states, “For many years, military (e.g., MIL-STD-2000) and commercial (e.g., IPC-J-STD-001) manufacturing standards have required manufactured circuit card assemblies (CCAs) to meet an ionic cleanliness requirement of 1.56 microgram (µg) of sodium chloride (NaCl) equivalence per square centimetre (cm2) of extracted surface, using resistivity of solvent extract (ROSE) testing per IPC-TM-650, method 2.3.25.”
Therefore, it is the position of the IPC committees that the value of 1.56 µg NaCl equivalence per square centimetre should be considered as obsolete for the following seven reasons:
- This test methodology was originally developed in the 1970s. It was never intended to be used as a cleanliness test, nor as a test for product acceptability; it was only intended to be used as a process control method.
- The use of the ionic contamination value as a measure of product acceptance was the result of a U.S. Department of Defense desire to implement pass/fail criteria.
- This ionic contamination value, and those derived from them, were originally developed for high solids (35% solids) rosin fluxes and ozone-depleting chemical (ODC) cleaning. The flux chemistries and cleaning solutions used today are completely different from those used when the ROSE limits were established.
- Modern assemblies are simply too complex in terms of residues to have a single “one-size-fits-all” cleanliness criterion.
- There is mounting evidence that as CCA component density increases, so does the sensitivity of the circuit to ionic contamination. Modern circuit assemblies have far greater component densities than found in the 1970s. This also means that residues that had minimal impact on component technologies from the 1970s can now have a significant impact on component reliability.
- For many assemblies, ROSE testing is no longer a sufficient test regimen to adequately predict acceptable levels of ionic residues. IPC has compiled a list of technical presentations showing the inadequacy of ROSE to predict ionic residues for high-performance electronics.
- It is recognized that ionic residue testing is critical for reliable circuit function, so the ROSE test has continued in use until a more suitable alternative can be identified and implemented.
To download The Printed Circuit Assembler’s Guide to Process Validation, click here. You can also view other titles in our full library.
To view the Gen3 roundtable on the PICT standard, click here.
Suggested Items
Real Time with… IPC APEX EXPO 2024: My Role as a Technology Solutions Director
05/02/2024 | Real Time with...IPC APEX EXPOPeter Tranitz, senior director of technology solutions at IPC, shares insights into his role as the design initiative lead. He details his advocacy work, industry support, and the responsibilities of the design initiative committee. The conversation also covers the revamping of standards, the IPC Design Competition, and the implementation of design rules in software tools.
HQ NextPCB of HQ Electronics Debut on the International Stage for Electronics Manufacture at IPC APEX 2024
05/01/2024 | PRNewswireHQ NextPCB of HQ Electronics, a leading Chinese-based multilayer PCB manufacturer and assembly house showcased its industrial prowess on the international stage for the first time at the IPC APEX Expo 2024.
IPC's Vision for Empowering PCB Design Engineers
04/30/2024 | Robert Erickson, IPCAs architects of innovation, printed circuit board designers are tasked with translating increasingly complex concepts into tangible designs that power our modern world. IPC provides the necessary community, standards framework, and education to prepare these pioneers as they explore the boundaries of what’s possible, equipping engineers with the knowledge, skills, and resources required to thrive in an increasingly dynamic field.
North American EMS Industry Down 4% in March
04/29/2024 | IPCIPC announced the March 2024 findings from its North American Electronics Manufacturing Services (EMS) Statistical Program. The book-to-bill ratio stands at 1.31.
Real Time with… IPC APEX EXPO 2024: A Global Presence in PCB Manufacturing
04/29/2024 | Real Time with...IPC APEX EXPORob DiGiovanni, VP of sales for the Americas at STARTEAM Global, discusses the company's global presence in PCB manufacturing. As he explains, the firm operates facilities across Europe, Asia, and North America, specializing in serving contract manufacturers in the automotive and medical industries. They emphasize quality and meeting OEM standards, focusing on offshore supply and non-Chinese factories in the North American market. The company has grown through acquisitions and rebranding to offer multiple products.