-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Driving Down Cost with Process Engineering
April 20, 2021 | I-Connect007 Editorial TeamEstimated reading time: 3 minutes
Nolan Johnson and Barry Matties speak with Matt Mack, a process engineer at ICM Controls. Matt shares how he’s driving down cost through continuous improvement. He also discusses planning for the future with automation and AI. Matt started with ICM Controls in 2019. Prior, he worked at Whelen Engineering (now GreenSource Fabrication) for about five years. His career in the PCB industry began at Sanmina.
Nolan Johnson: We’re interested in learning about your approach to process engineering. What’s your thinking for identifying processes that are in need of improvement?
Matt Mack: I start with our price per panels and the costs that are associated with it. I start to think, how can we make the process smoother, more efficient, where I don’t need to have as much human interaction with chemicals? That all starts with gathering data with chemical data. I’ll do titrations, for example. I’ll pick one line at a time that I will not have any dosing on, and I’ll calculate the square footage of panels through X amount of time, how much it dropped in concentration, and I’ll adjust dosing based on panel count. Then you have to optimize speed.
You can also do line speed, increasing or decreasing to optimize quality. I always strive for the 1.33 Cpk for the parts. It’s not always possible, but we come pretty close. It took about six months to really get dosing right. Right now, we do chemical analysis about twice a week. That’s much lower than recommended, but the data is not driving us to analyze it more. I asked our software guy to develop a chemical database that allows me to input the chemical data and track Cpk, track trends up and down, and in-spec/out-of-spec; if any of those rules are violated, it notifies me through an email.
Some of those are deemed critical, some are not. If any of it is deemed critical, we’ll trigger the production’s halt. If it’s not critical, we might be able to do it on the fly. For instance, let’s look at the copper concentration in a microetch. I might empty the line out before its formal dump, but it’s not going to impact quality on the product. Those are some of the rules that I observe. Any time you see a trend of five points decreasing, it could be a dosing issue, so I would jump right on the dosing, and verify it’s dosing what I’ve asked it to dose; second, maybe the chemical ran out and there’s an airlock. I get a lot of those emails where it’ll show you process control.
Matties: When you stand back as a process engineer and take that 30,000-foot view of a process, what do you want to improve to optimize it? What’s your process for doing that?
Mack: The first thing I monitor is speed. We track panels through and panels out. I would always start with asking: What are some of the slower ones, and how do I increase throughput on that piece of production? If you’re going to have funnels where, let’s say, the score machine is not putting out as many panels as the plating line, I might need to buy either a faster score machine or an additional score machine to maximize output. As we’re ramping up here, there is some capex equipment that we’re looking to quote in order to increase production on the floor. Generally, speed is what I look at.
The second thing would be chemical usage. If it costs us X to run one panel, what is the impact of that one piece of chemical on the panel? I look at price per panel by operation, as well. Can I get away with dosing less? For instance, for the pre-treat line, they recommended running something like 20 milliliters a panel. I actually optimized it to only run at about 8 milliliters. It saved us $18,000 over the course of a year. A lot of what drives me to look at process either optimizes panel production or price. Regarding price, for example, every six months I’ll review price per panel to determine where we can improve and where we can’t.
To read this entire interview, which appeared in the April 2021 issue of PCB007 Magazine, click here.
Suggested Items
The Chemical Connection: Reducing Etch System Water Usage, Part 2
05/02/2024 | Don Ball -- Column: The Chemical ConnectionIn my last column, I reviewed some relatively simple ways to reduce water usage in existing etch systems: cutting down cooling coil water flow, adding chillers to replace plant water for cooling, lowering flow rate nozzles for rinses, etc. This month, I’ll continue with more ways to control water usage in your etcher. Most of these are not easily retrofittable to existing equipment but should be given serious consideration when new equipment is contemplated. With the right combination of add-ons, it is possible to bring the amount of water used in an etch system to almost zero.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.