-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Workflow Challenges in Fabrication
December 22, 2022 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 2 minutes
Q&A with Paul Cooke
The job of the PCB designer is becoming more complicated every day. Designers are now acting as what amounts to project managers for the PCB, and they must be familiar with the many trade-offs that happen during manufacturing, many of which they can control during the design cycle.
Paul Cooke, the senior director of business development for Ventec International Group, is presenting a class at IPC APEX EXPO 2023 that looks at workflow challenges in fabrication, and the myriad drivers that can affect yield, reliability, and cost. Here he discusses the details of this Professional Development course, what he hopes attendees will take away, and why designers and design engineers would benefit from this class.
Q: Paul, tell us a little about the Professional Development Course on process flow and defects you are teaching at the show.
A: I put this course together to give designers, engineers, etc., a more in-depth look at what happens to their design as it goes through the fabrication process. It looks at how the fabricator adjusts processes to meet the design intent and what happens when it goes wrong; it’s like a [IPC] 2221, 6012, 600, and 9121 course all rolled into one. It shows the complexity of the process and how designs can affect the process flow, yield, quality etc. We talk about reliability, for example, of how something like via size can be affected by aspect ratio, layer count, drill parameters, desmear, and material selection and how they would all interact with each other to affect yield, cost, and reliability.
Q: Why should someone attend your class?
A: It’s for anyone wanting to increase their knowledge of the fabrication process. It is aimed at designers and process engineers at any level. The course is designed to be interactive with a lot of questions and hopefully 30 years of knowledge transfer. Time permitting, we may get to cover some emerging technologies.
Q: This sounds like a great class for PCB designers. What are some of the trade-offs designers should be aware of that can affect yield and reliability?
A: There are many factors affecting yield, reliability, and ultimately cost. We will look at each part of the process, discussing how each can be affected, which attributes of the design have the most impact on yield improvement, and how the fabricator achieves the desired level of release.
Q: What is the most important piece of advice you would give your attendees?
A: Attend the course with a lot of questions and take a lot of notes as we will cover a mountain of information. By the end I hope they have a comprehensive knowledge of the process and learn to always talk to a field application engineer prior to setting out on a new type of design, to eliminate any changes later due to cost, capability, yield, etc.
Q: Is there anything else you’d like to add?
A: I hope they all enjoy the course, and I am always looking for feedback, good or bad, so that I can adapt and improve for future classes.
This article originally appeared in the December 2022 issue of Design007 Magazine.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Ventec Discusses New Pro-bond Family of Advanced Products
05/01/2024 | Real Time with...IPC APEX EXPOChris Hanson, Ventec's Global Head of IMS Technology, outlines the launch of four pro-bond formulas that deliver an outstanding combination of low dissipation factor (Df) with a dielectric constant (Dk) range to maximize the design window for critical PCB parameters. As Chris points out, Pro-bond is designed for low-loss, high-speed applications, while thermal-bond dissipates heat from a component through the board to a heat sink.
IPC's Vision for Empowering PCB Design Engineers
04/30/2024 | Robert Erickson, IPCAs architects of innovation, printed circuit board designers are tasked with translating increasingly complex concepts into tangible designs that power our modern world. IPC provides the necessary community, standards framework, and education to prepare these pioneers as they explore the boundaries of what’s possible, equipping engineers with the knowledge, skills, and resources required to thrive in an increasingly dynamic field.
iNEMI Packaging Tech Topic Series: Role of EDA in Advanced Semiconductor Packaging
04/26/2024 | iNEMIAdvanced semiconductor packaging with heterogenous integration has made on-package integration of multiple chips a crucial part of finding alternatives to transistor scaling. Historically, EDA tools for front-end and back-end design have evolved separately; however, design complexity and the increased number of die-to-die or die-to-substrate interconnections has led to the need for EDA tools that can support integration of overall design planning, implementation, and system analysis in a single cockpit.
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Ansys, TSMC Enable a Multiphysics Platform for Optics and Photonics, Addressing Needs of AI, HPC Silicon Systems
04/25/2024 | PRNewswireAnsys announced a collaboration with TSMC on multiphysics software for TSMC's Compact Universal Photonic Engines (COUPE). COUPE is a cutting-edge Silicon Photonics (SiPh) integration system and Co-Packaged Optics platform that mitigates coupling loss while significantly accelerating chip-to-chip and machine-to-machine communication.