-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Shrinking Silicon, Growing Signal Integrity Challenges
March 9, 2023 | I-Connect007 Editorial TeamEstimated reading time: 2 minutes
What happens when die sizes shrink? As IPC design instructor Kris Moyer explains, quite a bit. Shrinking silicon can mean rising signal speed and rise times, and traditional PCB designers may find themselves dealing with problems formerly only seen by RF engineers.
We asked Kris to discuss the pros and cons of silicon shrinkage and some of the techniques and trade-offs that PCB designers and design engineers need to understand as they find themselves entering the RF arena.
Andy Shaughnessy: This issue focuses on the effects of shrinking silicon on a board’s signal integrity and EMI. So, what do PCB designers need to understand about die shrinkage?
Kris Moyer: Basically, the main thing that happens when you shrink the size of the die is that it shrinks the length of the channel of the transistors inside the die. What that effectively does is it increases the speed of the circuit, meaning it decreases the rise time or the fall time. Then you end up having to start treating your traces, geometries, and transmission lines almost as if they're RF designs.
We've heard for decades that RF designs are their own special little area of black magic, because we start dealing with all these waves and fields and so on. We say in digital design that it's the rise time and not the frequency. Which is the driving force, the key factor, that causes the need for all these high-speed designs? What is the frequency content?
Fourier's theorem says any wave form—square wave, triangle wave, sawtooth wave, or any wave form—can be recreated as a superposition of a sufficient amount of sine waves and cosine waves of sufficiently higher harmonics. Let’s take a fundamental frequency, 1 kilohertz. And you have A1, A3, A5 and A10 kilohertz. You have all these harmonics, we superimpose them, and you end up getting a square wave. Well, how square does that square wave need to be? This is the part that throws a lot of designers off.
When we talk about rise time, we're really talking about the time it takes that square wave, the digital signal, to change from a logic 0 to a logic 1. As the die shrinks, that time also shrinks. About 20 years ago, we were having rise times and fall times in the multiples of nanoseconds—five to 10 nanoseconds. It took that signal five to 10 nanoseconds to change from a logic 0 to a logic 1. I was just looking at one FPGA with rise times as fast as 0.25 nanosecond, and that's at 16 nanometers.
My friends who work in next-generation silicon at some of the big telecom companies are working in 5, 3, and 2 nanometer, and going sub 100 picosecond. Instead of 0.25 nanosecond, it’s 0.1 nanosecond and 0.05 nanosecond rise times. They’re such incredibly fast rise times that the number of harmonics we need to create a vertical square edge that transitions from A0 to A1 that fast means that the frequencies involved in that superposition in that Fourier series are up into the multiple gigahertz of frequency content. That means that you're in the RF frequency range.
To read this entire conversation, which appeared in the February 2023 issue of Design007 Magazine, click here.
Suggested Items
HQ NextPCB of HQ Electronics Debut on the International Stage for Electronics Manufacture at IPC APEX 2024
05/01/2024 | PRNewswireHQ NextPCB of HQ Electronics, a leading Chinese-based multilayer PCB manufacturer and assembly house showcased its industrial prowess on the international stage for the first time at the IPC APEX Expo 2024.
IPC's Vision for Empowering PCB Design Engineers
04/30/2024 | Robert Erickson, IPCAs architects of innovation, printed circuit board designers are tasked with translating increasingly complex concepts into tangible designs that power our modern world. IPC provides the necessary community, standards framework, and education to prepare these pioneers as they explore the boundaries of what’s possible, equipping engineers with the knowledge, skills, and resources required to thrive in an increasingly dynamic field.
North American EMS Industry Down 4% in March
04/29/2024 | IPCIPC announced the March 2024 findings from its North American Electronics Manufacturing Services (EMS) Statistical Program. The book-to-bill ratio stands at 1.31.
Real Time with… IPC APEX EXPO 2024: A Global Presence in PCB Manufacturing
04/29/2024 | Real Time with...IPC APEX EXPORob DiGiovanni, VP of sales for the Americas at STARTEAM Global, discusses the company's global presence in PCB manufacturing. As he explains, the firm operates facilities across Europe, Asia, and North America, specializing in serving contract manufacturers in the automotive and medical industries. They emphasize quality and meeting OEM standards, focusing on offshore supply and non-Chinese factories in the North American market. The company has grown through acquisitions and rebranding to offer multiple products.
EIPC Issues Letter of Urgency
04/29/2024 | Alun Morgan, EIPCAlun Morgan, president of EIPC, issued a letter last week in an effort to raise awareness of the state of PCB manufacturing in Europe. He writes, "The European PCB manufacturing industry and its supply base has been steadily shrinking since the dot com crash at the start of the millennium. European demand for PCBs and assemblies has, however, continued to grow, thus creating an ever-widening gap between European domestic capacity and consumption. The risks posed by this imbalanced supply and demand pattern came into sharp focus during the Covid-19 pandemic which caused chaos in extended supply chains across the world and resulted in widespread shortages."