-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Got Questions? Standards Have the Answers
October 19, 2023 | I-Connect007 Editorial TeamEstimated reading time: 2 minutes
The I-Connect007 Editorial Team recently spoke with Gerry Partida, vice president of technology at Summit Interconnect, and co-chair of the IPC-6012 committee. Gerry has been involved with standards development for years, and he believes that adhering to IPC’s standards and specifications has been a big part of Summit’s success.
In this interview, Gerry explains how Summit utilizes standards, manufacturing data, and information to reduce re-spins and scrap while increasing yield and profitability. He also discusses the repercussions that can occur when designers don’t follow IPC standards. As Gerry points out, everything you need to know is in the standards, so why not follow them?
Nolan Johnson: Gerry, we’ve spoken before about Summit’s use of manufacturing data, including microvia modeling. Tell us about how this all works with DFM rules and IPC standards.
Gerry Partida: Yes, we try to use data and information to make good decisions. We’ve been talking over the last couple of years about modeling microvia reliability. But we also use our ERP systems to collect data, and then look at that data for our yields. If there’s a defect, we can track it to see what has caused it. Then if we buy new equipment to solve and bring that defect rate down, we can track it to see whether our investment is going through to work it out. COO Sean Patterson believes that we are a technology company that owns board shops, so we want to use technology and the tools available to manage and do things in an intelligent manner.
Traditionally, the board industry would just do another re-spin and not analyze what is working and what is not, what the yields are, etc. At times I'll get a very challenging design from a customer who didn't follow IPC rules, and we’ll say, “No, this is not to the reliability that you require.” They’ll reply, “We've been getting these boards built for years,” and I’m thinking, “I understand what you're saying. You've been receiving good boards, but you do not know what is happening to make the quantity of your good boards.” Their fabricator may have had to throw away 50% or 75% of the boards that they produced to get that 100% deliverable.
To read this entire conversation, which appeared in the October 2023 issue of Design007 Magazine, click here.
Suggested Items
The New Industry: Will the Growth Continue?
04/30/2024 | I-Connect007 Editorial TeamHow sustainable are the primary financial models in the United States regarding PCB fabrication shops? In this interview with economic experts Shawn DuBravac and Tom Kastner, we explore what’s happening with U.S. printed circuit board shops in today’s market, how consolidation affects the industry, and what can be done.
Marcy's Musings: The Growing Industry
04/16/2024 | Marcy LaRont -- Column: Marcy's MusingsAfter decades of steady decline in the U.S. and Europe, the PCB industry is finally growing, especially in China Plus One countries. The U.S. for example, which seemed to have abdicated its title as the world leader in innovating high-technology cutting-edge manufacturing processes, is now in a race to regain what it lost and then some. The PCB fabrication industry is growing in the West, thanks to DoD funding, the CHIPS and Science Act, and hopefully, the passing of HR 3249, the Printed Circuit Board and Substrates Act.
PCB007 Magazine April 2024 — The Growing Industry Issue
04/15/2024 | I-Connect007 Editorial TeamAfter more than two decades of steady decline in the U.S., the PCB industry is finally growing in the West thanks to the CHIPS and Science Act, DoD funding, and hopefully, the passing of HR 3249, the Printed Circuit Board and Substrates Act. The U.S. is now in a race to regain what was lost and then some. But what does “growing” look like for the organizations that have received DoD funding, and for the rest of us? How can we sustain this growth?
It’s Only Common Sense: Here’s What To Do After IPC APEX EXPO 2024
04/15/2024 | Dan Beaulieu -- Column: It's Only Common SenseYou had a great time last week at IPC APEX EXPO 2024. Now you’re back home and ready to go on to other things. Au contraire mon frère. Now the work really gets started, and you must capitalize on all the good work you did last week. Follow up on the connections you made, the leads you created, and the partnerships and relationships you developed.
Dan’s Biz Bookshelf: Seeing the How
04/11/2024 | Dan Beaulieu -- Column: Dan's Biz BookshelfI might say this about a lot of books, but this one is a must-read. The author addresses a whole new way of doing business. It’s not like one day we woke up and there it was, a new way to get a ride (Uber), a new home away from home (Airbnb), a new way to get groceries (Instacart) and (DoorDash), and so on. The flood gates have opened, and there’s more to come.