-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Planning, DFM, and Inspection: Key to High-reliability Fab
October 30, 2023 | I-Connect007 Editorial TeamEstimated reading time: 2 minutes
At PCB West, Andy Shaughnessy and Kelly Dack spoke with Marc L’Hoste, VP of West and South Americas for ICAPE Group, a company that supplies and manufactures high-tech PCBs at locations around the world.
We asked Marc to share some advice regarding high-reliability fab. In this conversation, Marc is clear that planning, pre-work, and inspection are the key ingredients to high-reliability success.
Kelly Dack: Marc, you fabricate quite a few high-reliability PCBs. How do you define high reliability and what is your perspective on what high reliability means in our industry?
Marc L’Hoste: IPC class 3 stands out for high-reliability printed circuit boards, but it also depends upon the type of industry and the type of customer. When we look at our own customers, about 20% of them are in the automotive industry, which has always been very complex to navigate. Automotive suppliers have very high standards to follow, such as the IATF ISO certification. For example, the quality levels are usually measured in parts per million (PPM) of manufactured parts. Over the past 15 years, we've been able to deliver fewer than 40 PPM for the automotive industry, which means less than 40 defective PCBs per million—significantly better than we see in standard consumer production where we are usually talking about 250 PPM. The same applies to other critical industries, such as aerospace, with certifications like AS9100, and critical processes with sampling and DPPM (defective parts per million) controls.
Dack: That’s a pretty low defect rate. What are some of the most typical causes of failures you see in high-reliability fabrication?
L’Hoste: A lot of different points need to be checked. For me, it always starts with the design itself, and making sure that whoever designs the board follows the IPC guidance. We have spreadsheets and guidance sheets that we can share with our customers. Let’s say Bob is tasked with selecting the right manufacturer for his boards. Bob must make sure that, if you build a flex or rigid-flex circuit board, you're not working with a factory that specializes only in rigid or metal PCBs. Selecting the right manufacturer usually means auditing them to make sure they have the right technical capabilities to build these boards. Choosing the right materials and finishes is also critical, and the finishes you select will depend upon the type of components on your boards. OSP (organic solderability preservative) is great, of course. It's very cost-effective, but if you have a BGA on your board, that might not necessarily be the right finish to choose.
Once you've nailed down all these different points, make sure that you do a good inspection on your board. A 100% test is always mandatory. Automatic visual inspection is very important, too. What we propose at ICAPE Group is a kind of double inspection. We have about 60 quality inspectors, and some of them are directly working with our engineering and manufacturing partners. Their job is to control the quality of our boards at these different locations. We have double points of inspection in the process: 100% inspection on our boards at the factory, and then inspection with our own quality people at our partners’ locations before we ship.
To read this entire conversation, which appeared in the October 2023 issue of PCB007 Magazine, click here.
Suggested Items
Real Time with... IPC APEX EXPO 2024: Adhesive Materials and Equipment Update with Dymax
05/01/2024 | Real Time with...IPC APEX EXPOVirginia Hogan, global business development manager at Dymax, discusses adhesive materials, dispensing and curing equipment, a new, high-reliability conformal coating, and various materials and dispensing methods.
Empowering Electronics Assembly: Introducing ALPHA Innolot MXE Alloy
04/16/2024 | MacDermid Alpha Electronics SolutionsIn the rapidly evolving electronics industry, where innovation drives progress, MacDermid Alpha Electronics Solutions is committed to setting a new standard. Today, we are pleased to introduce ALPHA Innolot MXE, a revolutionary alloy meticulously engineered to address the critical needs of enhanced reliability and performance in modern electronic assemblies.
RTX's Ascentia to Receive Significant Upgrades
04/12/2024 | RTXCollins Aerospace, an RTX business, will introduce two major upgrades to the Ascentia software platform. Ascentia is a software solution for aircraft reliability management that is designed to streamline operations, enhance decision-making and predict future events.
Indium to Host Free Webinar on Lead-Free Solder Paste for Automotive Applications
04/09/2024 | Indium CorporationIndium Corporation’s Senior Research Metallurgist, Jie Geng, Ph.D., will conduct a webinar on low-voiding, high-reliability, lead-free solder paste for automotive applications.
SMTA Announces Program for High Reliability: Strategic Technology Advancement Research Forum
04/08/2024 | SMTAThe SMTA announced the finalized program for the High Reliability: Strategic Technology Advancement Research Forum which takes place on May 2, 2024 in Olathe, Kansas, USA. The event, now in its second year, addresses challenges for electronics manufacturers in the high reliability sector.