-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Aismalibar to Attend productronica
November 7, 2023 | AismalibarEstimated reading time: 2 minutes
As the only exhibition of this kind, productronica showcases the entire value chain in electronics manufacturing – from technologies and components to software and services. Over 45,000 professionals attended the conference in 2021 and it continues to grow each year.
After successful participation at productronica 2021, Aismalibar will attend the Munich event on November 14–17, 2023 and showcase its latest developments in IMS laminates, Thermal Interface Materials (TIMs) and a range of automation for production of PCBs from the Technosystem brand.
Aismalibar will be in Booth 3.330 and will exhibit machinery from the Technosystem catalog, a brand of The Benmayor Group that develops technology and machinery for the production of PCBs. Aismalibar will also present its new range of loaders, unloaders and robots for the production of printed circuits. We will be presenting our brand-new MILLENIUM V4 Loader for Inner Layer Preparation and our MILLENIUM V4 AGV.
Additionally, Aismalibar will present Thermal Interface Materials (TIMs), which have been designed to improve dielectric isolation and fast thermal transmission in battery assemblies, taking into consideration cost reduction, lifetime performance, safety, and reliability.
Our Thermal Interface Materials are divided into two main areas, differentiated based on whether they need dielectric capacity. Dielectric requirement is determined by the electronic device, its operating voltage, and the applicable regulations regarding ground insulation. Additionally, Aismalibar has developed a series of applicable surfaces on the TIMs, differentiated by whether they need to be self-adhesive. Both surfaces serve, in turn, to reduce the air cavities that exist between the surfaces of the TIMs and the heatsinks or electronic components.
COPPERFILLER and BOND SHEET CURED offer a high-performance alternative solution to current thermal pastes or pads. The new COBRITHERM ALP is made from an aluminum base that is dielectrically insulated, designed to build structures, covers, partitions or radiators, among other solutions. It is completely insulated and guarantees excellent contact between the battery and dissipation elements.
Finally, Aismalibar will present Insulated Metal Substrates (IMS). IMS METAL CLAD Is a thick aluminum-based substrate, cladded in ED copper foil, designed for an effective thermal dissipation and high electrical insulation. Our proprietary formulated polymer-ceramic ensures high thermal conductivity, dielectric strength, and thermal endurance. AISMALIBAR’s Insulated Metal Substrates allow processing by standard PCBs procedures, integrating heat dissipation with no need for extra components and SMD assembly process.
COBRITHERM ULTRATHIN 5W/mK and 8W/mK - TG180ºC - 150ºC MOT is an insulated metal substrate (IMS) based on an aluminum cladding with an ED copper sheet on the opposite side, containing an innovative 75-micron ultra-thin polymer-ceramic dielectric layer of its own formulation, offering industry-leading thermal conductivity and high dielectric strength. It also offers strong MOT, High Tg and Low CTE values, which are the key elements for performance of the MPCB operating at high temperatures.
The Thermal Multilayer product range will be presented, as well as products for the development of multilayer PCBs that can be combined to customize solutions for complex electronic designs and applications. THIN LAM and BOND SHEET can be used in standard multilayer lamination processes to improve resistance to thermal shocks, conductivity and thermal dissipation.
The new THIN LAM and BOND SHEETS of 3.2W have been developed to reduce thermal resistance. A MOT of 150ºC, high Tg values of 180ºC and Low CTE below 1.8% (50 to 250ºC) considerably improves overall thermal efficiency. We are excited to exhibit our newest Cobritherm Pre Preg Glass Free product, with high thermal conductivity of 5W/mK and 8W/mK. More information will be made available at the show.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Ventec Discusses New Pro-bond Family of Advanced Products
05/01/2024 | Real Time with...IPC APEX EXPOChris Hanson, Ventec's Global Head of IMS Technology, outlines the launch of four pro-bond formulas that deliver an outstanding combination of low dissipation factor (Df) with a dielectric constant (Dk) range to maximize the design window for critical PCB parameters. As Chris points out, Pro-bond is designed for low-loss, high-speed applications, while thermal-bond dissipates heat from a component through the board to a heat sink.
epoxySet Unveils UC-2210M - Urethane for Electronic Component Protection
04/29/2024 | epoxySetepoxySet introduces a new and unique, urethane potting compound. The UC-2210M was formulated to protect electronic components in high moisture and thermal environments including constant atmospheric exposure, oceanographic environments and high humidity conditions.
epoxySet Introduces EO-20E – Versatile, Electrically Conductive Epoxy
04/29/2024 | epoxySetepoxySet produces EPOXIOHM EO-20E an industry established, reliable electrically conductive epoxy designed for solder replacement, chip bonding and other intricate electronic and optoelectronic assemblies. This creamy paste has a an easy to use 1:1 mix ratio with a 48 hour work time.
Adura Solutions Exhibits at Del Mar 2024
04/24/2024 | Adura SolutionsSumit Tomar, CEO of Adura Solutions, has announced that his company will be exhibiting at this year’s Del Mar Electronics and Manufacturing Show to be held at the Del Mar Fairgrounds, San Diego, California, April 24-25.
Real Time with... IPC APEX EXPO 2024: Exploring IPC's PCB Design Courses with Kris Moyer
04/18/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and IPC instructor Kris Moyer discuss IPC's PCB design training and education offerings. They delve into course topics such as design fundamentals, mil/aero, rigid-flex, RF design, and advanced design concepts. They also highlight material selection for high-speed design, thermal management, and dissipation techniques. The interview wraps up with details about how to access these courses online.