The Right Approach: I Hear the Train A Comin'
It’s Only Common Sense: OCCAM—the Time Is Now
Marcy's Musings: The Growing IndustryRework: A Perspective From the Source
January 17, 2024 | I-Connect007 Editorial TeamEstimated reading time: 1 minute
Maria Mejias and her team at Intel work on the cutting edge of rework techniques. Tasked with characterizing rework processes for Intel’s boards and packages, Maria’s work is on the vanguard. We spoke to Maria about how her team works, what it’s like to be on the cutting edge of rework, and what contract manufacturers should expect.
Nolan Johnson: We're exploring rework and the associated costs. What is your involvement with it?
Maria Mejias: I have been with Intel for 24 years, with my last nine in Oregon as part of the Test and Platform Technology Development (TPTD) group. I have been involved in rework as a module engineer, a program manager, and as an engineering manager. My group oversees the rework development for Intel’s new products, and we create and define the rework process recommendations. Before I joined this team, I was part of the engineering team at Assembly and Test group in Intel Costa Rica where I had different roles during my 15 years there.
Johnson: What are the emerging trends from the semiconductor sector?
Mejias: We are seeing a trend where space is very important; we try to optimize the space and the functionality as much as we can. There are a lot of challenges where there are more limitations in space, which could induce the risk to create defects on the board and adjacent components during the component repair.
The range of packages sizes varies and on one side you have small packages with small ball pitch and on the other side we have large form factor packages. We work with both tendencies in package sizes and designs to develop robust rework processes that meet the product requirements.
Read the rest of this article, which appeared in the January 2024 issue of SMT007 Magazine.
Share on:
Suggested Items
Explore Superior Rework & Soldering Technology from Kurtz Ersa at EPTECH Toronto
03/07/2024 | ErsaKurtz Ersa Inc., a leading supplier of electronics production equipment, is excited to announce its participation alongside Comtree at EPTECH Toronto, scheduled to take place Wednesday, April 17, 2024 at the Sheraton Parkway Toronto North.
The Knowledge Base: Mastering the Art of Reworking Circuit Assemblies
01/31/2024 | Mike Konrad -- Column: The Knowledge BaseIn the dynamic realm of electronics manufacturing, the need for reworking circuit assemblies is an inevitable reality. Whether it's correcting defects, upgrading components, or adapting to design changes, the process of rework plays a crucial role in ensuring the functionality and reliability of electronic devices. In this column, we'll delve into the challenges, best practices, types, and reasons for reworking circuit assemblies, and shed light on the intricate world of electronic assembly modification.
Smart Factory Insights: Making Rework a Smart Business Opportunity
01/24/2024 | Michael Ford -- Column: Smart Factory InsightsRework in manufacturing can bring waste, unplanned responses to an error, or too much variation. You also have to retain specialist skills to perform the work. Since rework cannot always be completely eliminated, let’s consider how we can create a new business opportunity.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
01/05/2024 | Marcy LaRont, PCB007 MagazineThe Christmas and New Year’s holidays made for much-appreciated off-time in the U.S. and Europe, but there was still a lot of good industry reading for all to enjoy. From Happy Holden’s influence on our youngest and brightest to the cost of rework, policy challenges ahead for European PCB and PCBA companies, to new faces in the industry—with some bonus R2-D2 thrown in for good measure—these articles are worth a few minutes of your time. Here are my picks from this past week in industry news and feature articles.
Nolan’s Notes: The Cost of Rework
01/03/2024 | Nolan Johnson -- Column: Nolan's NotesIn this issue of SMT007 Magazine, we visit the rework processes, arguably one of the highest-skilled, highest-pressure jobs on the manufacturing floor. What are the technical challenges? How is the rework job function being changed by new packaging technologies and increasing board densities? When faced with a staffing shortage in rework, how can we remedy the situation? How will the skill sets for rework need to evolve?